My youngest nephew on my husband’s side is hanging out with my husband and I while the older nephew is at his basketball tournament today. He just asked me if 11 in Spanish was “diez y uno” which, to me, is adorable kid logic cuz of COURSE to him it makes sense that 11 in Spanish would be ten and one. Especially when 16-19 actually IS ten and (insert single digit number here) in Spanish
ok so, I approached my local library with a proposal to donate a mural as a way to A: build portfolio/gain practical experience and B: give back to a beloved public institution. The director was very enthusiastic about it and i've been working on it since the beginning of March. Come with me as I endeavor to paint what is in all honesty an excessive amount of birds
I wanted the birds to look like they were actually in the space so first thing after doing the draft was to do a lighting study
after that I covered the walls in letters in lieu of a projector/vr headset bc i have neither of those :) Then i take a picture of the section of wall and superimpose the lineart over top of it so I can pencil in the lines
et voila
and that was a whole week on it's own so next comes the paintin' >:)
my chains are broken i am FREE. although i did have a great deal of fun with this, the barring on the wings itself took me like four days and i am READY to move on
this was a week and a half of continuous work so please excuse me for getting a little emotional in the bg 🙏
BIRD NUMBER 10!!! The Male Mallard Duck, Anas platyrhynchos
the male and female ones are gonna be posted separately bc they're taking a lot longer lol but yea! super happy i was able to capture the iridescent green of the head, i found metallic green and blue paint at a craft store that really made his head POP. it looks better in person i promise
ALSO!! As this is the 10th one, BIG announcement. The end is in sight!!!!! I plan to finish within the next 3 weeks and there will be a small dedication ceremony/ unveiling happening at the library to commemorate its completion on the 16th of May. If you live in the Western New York region and want to check it out for yourself shoot me a dm!
Also thank you everyone for your kind words and support throughout this whole process, it's been a genuine treat thinking there are potentially thousands of you out there cheering me on while I paint this 🥹
I'm obsessed with this chair. The artist takes a flimsy hunk of injection-molded plastic that's been cost-cut to hell and back, and insists that we look at it with fresh eyes and understand its beauty. And they went about it in the most labor-intensive way I can think of.
Absolutely nothing about this design is convenient to execute in wood. Every piece is curved, most have compound curves. This is artisan craftsmanship: it's inherently slow, manual, and skilled. Notice, also, that most features of this chair must be thicker and heavier than on the plastic chairs being imitated. Injection-molded chairs can be produced in this shape in a matter of minutes with far less material at very low cost.
If these flowing, organic curves are so beautiful in polished wood, perhaps they are also beautiful in the mass-produced chairs that are far more accessible. Perhaps we should remember to admire designs that succeed enough to become ubiquitous. I don't know about you, but I'll never see injection-molded chairs the same way again.
I agree with all of this, but YOU HAVE HIT UPON A FORGOTTEN TRUTH OF PLASTIC CHAIRS!!!!!
The standard one-piece injection molded plastic chair is referred to as a "Monobloc", literally just describing it as a single piece. The history of this chair is fascinating, and it all starts back in 1946, with the D.C. Simpson Monobloc.
Douglas Colborne Simpson was an architect mostly active in the 40's and 50's, designing a lot of classic mid-century style buildings in Vancouver, Canada(1). In 1946, as part of a government project to find new uses for materials developed for WWII, he and engineer James Donahue developed the design you see above, simply called the Monobloc(2). Unfortunately, we don't know a lot about this chair as it was only ever a prototype, and no modern examples have survived, nor have most of the records surrounding it(3). To my knowledge, we don't actually know if this was technically injection molded, or crafted some other way. We can't even be sure if it was technically the inspiration for the designs that followed, but no matter the case it has lent its name to the entire genre.
Plastics technology was simply not what it is today back in the 1940's. Most people would have had very little plastic in their homes, most likely just a few pieces of Bakelite (the first commercially viable plastic, made from a formaldehyde based resin in a Bakelizer, the best name for any industrial manufacturing equipment ever). Over the following few decades, however, as a wider variety of plastics were both developed and came down in price to the point of commercial viability, the concept of the plastic chair was revisited, and the first folks to revisit it were Helmut Batzner, in 1964, and Joe Colombo, in 1965.
This, is the Bofinger chair, Batzner's design:
The elements of D.C.Simpson's Monobloc were pretty alien compared to todays mass-manufactured plastic chairs, but here we start to see some more modern elements come into play. The first thing you probably notice is the front legs, which have that characteristic visible 90 degree bend in them for added rigidity, plus a much more comfortably leaned back and slightly scoop-shaped seat. We also see much more support in the back rest, with broad triangles allowing for a more efficient use of materials without losing back support.
Similar to Simpson, Batzner was not an industrial designer, but an architect, and this chair had a very specific purpose. Batzner and his team designed it as part of a project to build a new theater in Karlsruhe, Germany, which required a large amount of additional seating which could be easily packed away into storage or distributed around the theaters rooms by the staff (4). As such, it was designed to be both lightweight and stackable, so several of them could be moved by one person, and they could be stored compactly. This piece of furniture was a huge hit a the theater, and was so popular that 120,000 units would ultimately be manufactured and sold around the world, with each one taking just 5 minutes to produce (4).
Around the same time, Joe Colombo enters the scene with this:
Colombo was an artist in several mediums who, after taking over his families appliance company in the 50's, made the shift towards architecture and interior design, and started designing a wide array of trend-setting furniture(5). The chair shown above is known as the Universale (sometimes referred to as the Chair Universal 4867), designed in 1965. This chair differs pretty greatly from the ones that came after it, it many ways it represents a different path that could have been taken, but it's also very widely referenced as an inspiration for what is broadly considered the origin of the white plastic chair the world over.
Enter: the Fauteuil 300
This is, arguably, the first iteration of the white plastic chair we all know today. Designed by Henry Massonnet in 1972, the Fauteuil 300 and it's imitators are, collectively, the single most widely used piece of furniture in the entire world(6). Before that, however, it was something else entirely: works of art.
What might be hard to recognize in hindsight is that all of these chairs described so far were not everyday objects. They were on the forefront of modern design, they made use of brand new materials and manufacturing processes, and at the time they were each made, they were slick, stylish, and fairly expensive. Despite the speed at which they could be manufactured, these innovative, high-end chairs rose sharply in cost up through the early 1980's due to the sheer demand for them. They weren't cheap spare seating you stuck in the garage, they were placed at dining tables and on fine patios, and they were a wildly popular talking point. That's not to say their expense justified their artistic value, but rather that their expense and popularity was a product of their status as highly contemporary and boundary-pushing designs.
With the price of plastics declining after the 70's, the increasing accessibility of injection molding to manufacturers, and the widespread popularity of these designs, copycats proliferated rapidly, and eventually drove the price down. This era, in the 80's and 90's, is when these chairs became cheap an ubiquitous, and where they became manufactured the world over.
And here is where we reach this piece, "Plastic chair in wood", by Maarten Baas, and a piece of the history I've left out so far. The Monobloc was designed to be made out of wood. Like the the other chairs designed by Joe Colombo, like the chairs that predated the Simpson, the Monobloc was designed with the intention of using laminated plywood, but as the artists and designers behind them began to experiment with new materials they fell in love with the idea of making them from plastic, and so they did. They redesigned and redesigned until they made something that would be impossible to make in wood at a price most people could afford, but which could be made from plastic in mere minutes. The organic curves and thin profiles would take so much time, so much waste material, so much skill and effort to create if made of wood that they could never be furniture, they could only be art. Baas' chair is a perfect, beautiful reflection of that.
That, in brief, is the history of the design of the white plastic Monobloc chair, but it's not all there is to know. In fact, it's kind of just the start. I've linked my sources below, but I would strongly recommend checking out the German documentary Monobloc, by Hauke Wendler. It goes over the history, but it's far more interested with what the Monobloc means, and what it's place is in our world today. The impact it's made, the better and the worse, and what it says about us. It's fascinating, and well worth your time.
My parents always told me and my sister "all you can do is your best". I used to think it only applied to exams cause that's when I heard it the most, but it's actually impacted me much further than that. School really gave me a lot of issues with perfectionism and feeling like I'm never good enough, and I'm always sending myself into a spiral of self doubt (especially with my last job where there was SO much expected of you even if you were only there once a week). But my parents brought me back down to earth by saying "all you can do is your best", and what they weren't saying but there was an underlying sentiment of was "you can't give what you don't have, and if this is all you can do for today then that's enough. It doesn't make you a failure and it certainly doesn't make you less in our eyes". It's a hard lesson to internalise for me, but a massively important one
Ultimately, she spent 20 hours redoing the copy from scratch — and with her $100-per-hour rate, that meant her client was shelling out $2,000 for copy that likely would have ended up being far cheaper had a human just written it in the first place.
Work still makes me anxious. I’ve been at this job for almost a year now and it still makes me so anxious to think about going to work and about being at work. It’s not just this job, though; it’s work in general 😓
Saddest thing ever is reading an academic paper about a threatened or declining species where you can tell the author is really trying to come up with ways the animal could hypothetically be useful to humans in a desperate attempt to get someone to care. Nobody gives a shit about the animals that “don’t affect” us and it seriously breaks my heart
[Image description: text from a section titled On Being Endangered: An Afterthought that says:
Realizing that a species is imperiled has broad connotations, given that it tells us something about the plight of nature itself. It reminds us of the need to implement conservation measures and to protect the region of which the species is a part. But aside form the broader picture, species have intrinsic worth and are deserving of preservation. Surely an oddity such as C. vicinella cannot simply be allowed to vanish.
We should speak up on behalf of this little moth, not only because by so doing we would bolster conservation efforts now underway in Florida, [highlighting begins] but because we would be calling attention to the existence of a species that is so infinitely worth knowing. [end highlighting]
But is quaintness all that can be said on behalf of this moth? Does this insect not have hidden value beyond its overt appeal? Does not its silk and glue add, potentially, to its worth? Could these products not be unique in ways that could ultimately prove applicable?
The husband and I have been playing the Pokémon tcg while he’s on the mend, and it’s been a lot of fun!! 🤗 we played a couple of matches before bed— he won both 😅
Hey guys. Um this is going to be awkward but with everything that is going on in the world, this filipina and the Philippines is going to be hit pretty hard by all that is going on again. The oil/gas shortage is already affecting us by skyrocketing every single thing's prices to heaven and well...
Guys, I need your help again. Please.
I already have a job I promise your girl has been stuck in the graveyard shift so that's also my sleep schedule destroyed but with me still recovering from all the stuff I've had to borrow from and my savings still being in the reds, it's not going to be enough to deal with the horrendous price hikes and everything. I've been stressing myself so sick that my housemates are worried about my mental health since I've been constantly spiraling I'm ngl. It's really, really bad.
Any single dollar can help so much. At most, I'm going to need at least 500$ to take care of everything. Here's the list I'll have to buy to maintain transparency:
- 90$ - Grocery (This will at least last us about two or so months)
- 60$ - Two sacks of 25kg rice (another 2 months)
- 70$ - (LPG tanks, 2 months of gas for cooking)
- 100$ - Pay off one of the debts so that that will at least ease some of the stress on my back
- 180$ - Emergency Food for at least an entire month
I'll even post pictures of everything once I get the funds to show you all that I wasn't lying when I said that I needed these. I just. This was my last resort. I didn't want to come begging you guys again.
I'm just so so tired guys. Sometimes, I don't want to sleep anymore because it means it'll be the next day.
Please send it over via:
Paypal or Kofi
The dollar-philippine pesos exchange rate is really high so I also wanted to take advantage of it. If any of you are a catholic or believe in a god up there, also please pray that they fulfill my wish.
Here's some free pictures of my shaved rat son. Sol is asking you all to please help us.
dailybridgerton
annaxmalina
tangentwithtanner
2087
discoholicmusic
germansingergirl
