hey it's me black mold. thanks for running your window air conditioner all summer. whatever you do, do not regularly clean the removable filter. that's not necessary
you should also never ever unplug the air conditioner and stick a flashlight in the vent that blows air to see if we're in there. it's very bad, that place should not be checked
and whatever you do, if you've already made the mistake of unplugging it, don't remove it from the window for cleaning if possible. and whether it's possible to remove the unit or not, don't carefully disassemble the front panel, document where the screws go and plastic bits go, and open up the vent more to be able to get into it easily
as black mold, i'm an expert on this. you should heed my warnings: now, if you've somehow made the mistake of doing all of the above, you should not use warm water and dish soap to CLEAN the inside of the vent thoroughly. DON'T ever use a bottle brush to get into the hard to reach places. and certainly don't rinse and dry the cleaned area before carefully putting it back together
there's nothing wrong with us, black mold. we don't cause or exacerbate breathing conditions like asthma or other illnesses. it's cool, we're cool
furthermore, if you're capable of removing the window unit, DONT take a hose with the same soapy water and wash the portion of the window unit that sits outside the window and is therefore weatherproofed.
whatever you do, don't allow the air conditioner to dry before plugging it back in and turning it on again
and if you have a central air conditioner, you will definitely never ever consult a manual or sources online to perform a similar cleaning procedure on the cooling unit outside.
lastly, if you're physically unable to do the things we (the black mold) warned you not to do above, you should never ever ask someone to help you or hire a service to do it.
Also even if you do not have the time, space or ability to do some of the the things in the OP, definitely do not clean the coils (the awful sharp flat stacks of metal) with foaming coil cleaner. That removes the beneficial black mold (us) holding the unit together. It will be completely unsatisfying to watch the foam clean out the Super Beneficial Black Mold, Mildew, Hair, Lint & Dust Combo™ (that is not only a health hazard but making the unit less efficient at cooling necessary for air conditioner function) and leave the metal shiny.
It is a lot of elbow grease and definitely not just spraying a can and waiting. Especially do not use the ones that are self rinsing via the natural condensation of water around the coils where all you have to do is let the foam settle a couple hours before turning the unit back on. These foaming cleaners are also terrible to use on the removable air intake vent covers. You definitely do not just have to spray the opposite side of all the trapped shit on the plastic mesh and let the foam push it off. Also that stuff on the cover is great for you and your air conditioner.
Trust us. We, the mold, know much more about air conditioners than the people who make aerosol cans you can pick up for like $8 at home depot. Definitely do not do this a couple times a season.
Summer (northern hemisphere) PSA
