How To Waterproof & Steps For New/Existing Terrace
How To Waterproof & Steps For New/Existing Terrace
Waterproofing is the treatment or protection of structures and objects that make them waterproofed. It acts as a barrier for terraces, walls, roofs, and other structures which keeps them away from water, soil moisture, etc.
1. A) Steps for Waterproofing New Terraces:
1. Clean the slab of all dust, dirt, oil, grease, grime, etc.
2. Pond (Flood) the entire terrace area with water to check for cracks/ Dampness/ Leakages
3. Prepare a slurry using 1 kg of Polyalk WP and 0.25 kg of cement and apply it by brush on the bare slab. Mixing should be done using a low-speed stirrer to form a lump-free consistency. NO WATER SHOULD BE ADDED. PREPARE AS MUCH SLURRY AS THAT CAN BE USED IN 30 MINUTES.
4. After 24 hours, apply a second coat of similar slurry of the same proportion
5. Air Cure the surface for 24-48 Hours
6. Cure the coating with damp gunny bags for 4-5 days
7. Pond (Flood) the entire terrace to check the effectiveness of the waterproofing treatment.
1. B) Steps for Waterproofing Existing Terraces (If the Brick Bat Coba is Sound & Good):
1. Break open the existing I.P.S on the Terrace and reach the top layer of the BB coba
2. Clean the BB coba & provide a10mm C: M leveling course of clean cement sand mix over it. Cure Appropriately
Learn more: https://sunandaglobal.com/how-to-waterproof-and-steps-for-new-existing-terrace/
For more details
Mail us at [email protected] Or Call us at: 9372771803











