C6x8.2 Dimensions Chart – Structural Steel Channel Specifications
When you're specifying structural steel channels for a project, understanding the exact measurements matters. This guide breaks down the c6x8.2 dimensions and related specifications so engineers, fabricators, and procurement teams can make accurate decisions. Whether you're comparing section properties or confirming fit in a framing system, bobcometal provides reliable guidance and high-quality channel sections.
The designation C6x8.2 identifies a channel with a nominal depth of 6 inches and a weight of 8.2 pounds per foot. The letter "C" stands for channel, the first number (6) is the nominal depth, and the second number (8.2) indicates the mass per unit length. Note that actual measurements — like flange width, web thickness, and inside radii — can vary slightly by manufacturer and standard (ASTM, AISC), so always confirm mill data when precision is required.
Typical dimensions and section properties
Below are representative values you should expect when working with c6x8.2 dimensions. These are typical and intended for planning; use mill certificates for final design or procurement.
Nominal depth (d): 6.00 in
Flange width (bf): ~1.375 in (manufacturer-dependent)
Web thickness (tw): ~0.12 in
Flange thickness (tf): ~0.16 in
Inside radius: small, rolled into junctions
Typical section properties (approximate):
Moment of inertia and section modulus: see mill tables for exact values—critical for bending and deflection checks
Radius of gyration: used in buckling calculations
Where C6x8.2 channels are used
C6x8.2 channels are commonly used for light structural framing, secondary bracing, purlins, edge members, and small machine frames. Their shallow depth and moderate weight make them practical where heavy bending capacity isn’t the main requirement but where a compact, easy-to-handle member is preferred.
Load type — For bending-dominated applications choose sections with higher section modulus; consult the full section table.
Orientation — Channels perform best with the web vertical; their open profile affects torsional stiffness.
Connections — Bolt spacing, welds, and clip angles can change local capacity—check connection detailing.
Environment — For outdoor or corrosive environments choose galvanized or coated finishes.
Why accurate C6x8.2 dimensions matter
Assuming incorrect flange widths or thicknesses can lead to wrong bolt patterns, clearance issues, or parts that don’t fit. For structural safety and constructability, always request the producer’s C6x8.2 dimensions chart and mill certificate.
Ordering and support from bobcometal
At bobcometal, we supply channel sections with detailed dimensional charts and material certifications. If your project requires certified dimensions, CAD drawings, or custom finishes, our technical team can provide the exact c6x8.2 dimensions and supporting documentation.
