#changetable

[canadubvr6]

Not a bad year, if I do say so myself. Looking forward to 2018! #bestnine2017 #woodworking #joinery #powercarving #changetable #crib #nurseryfurniture

[canadubvr6]

Installed In Situ! My friends' baby is due tomorrow, so I guess we'll see if the storks are on schedule! 😊👶🏼🤗👨‍👩‍👧 I'm hoping that many giggles are had here over the next few years! #woodworking #maple #dresser #changetable #top #joinery #handcutdovetails #baby #babygiggles

[canadubvr6]

Bench clean and prepped to cut some joinery tomorrow! This is the cleanest it's been in a LONG time 😊! #woodworking #handtools #workbench #joinery #handcutdovetails #throughtenons #maple #changetable #dividers

[canadubvr6]

It's been some time since my last #woodshavingswednesday post. All the ingredients for a nice under bevel and an edge treatment that feels great to the touch, straight off the tool! #woodworking #handtools #maple #dresser #changetable #top #handmade

[canadubvr6]

View this post on Instagram

Thought I'd share my cheater method for long glue joints. These two Maple boards are 6' long and those three my jointer is more than capable, I find this technique so much more predictable and faster. I use a track saw to get a perfectly straight edge on my boards, then I clean up that cut with my #7 jointer plane (with the fence to maintain 90 deg). Then, I make a spring joint by taking some light passes with a #4 from the Center of one board. To help with alignment I'll probably throw some 4mm dominos along this joint just so it takes a few passes less going through the drum sander. Thanks for watching! Happy Sunday! #woodworking #festool #feetoolme #veritas #stanley #gluejoint #maple #dresser #changetable #top #technique

[canadubvr6]

View this post on Instagram

I don't know about anyone else, but when I have to make an under bevel on any board, I vastly prefer a hand plane to a router or a long bevel rip cut on the table saw. I love the freedom of just drawing some lines at an angle that seems visually pleasing and going to town making shavings. 😊 what's your favourite way to make long bevels? #woodworking #handtools #stanley #handplane #maple #dresser #changetable #top

[canadubvr6]

Filling a couple of cracks/voids in this dresser top before the final sanding and applying finish! #woodworking #epoxy #westsystemsepoxy #maple #dresser #changetable #top

[canadubvr6]

Working on the drawer frames for the #changetable. Just the joinery on these, the drawers and the top left! Now, will I beat the #baby 😬 #woodworking #maple #walnut #changingtable #changingtable #downtothewire #tightdeadline #probablygoingtobechanginghisfirstfewdiapersonthefloor