On the end of the week with an interesting another throttle that will give about 40% more air, and thanks to the sharp inlet (you can cut the paper;) ) much faster air. By the way of such a modification there is a small bonus or a hiss of air such like a bov. Throttlebody from Chrysler 300M 3.5V6, with a very interesting shape and with a mass of unevenness. The biggest downside is the fact that the butterfly is 65mm and the outlet 60mm, even weaker with the inlet because it is only 54mm. Modification in a nutshell: - all machined equally with the butterfly diameter, i.e. 54mm and 60mm to 65mm - removing all inequalities - porting and optimization for the intake manifold done - slimmed axle - thinblade perfectly flat - butterfly rolled 1mm - new lighter and faster bearings installed - a new softer spring has been fitted - new sealants - all galvanized for maintenance, thanks to which we have a black color Such a throttle will give a much faster response to gas, and together with the modifications that the customer has already made (exhaust, intake, fight) + after installing the throttle, the program on the dynamometer will give an interesting result even in the NA engine. Waiting for the chart with the original damper and the damper after my modification. I modify all kinds of throttles, intake manifolds, exhaust manifolds, heads for given requirements. Parts can be brought in person or sent by courier to my company. Worldwide international shipping. PayPal accept. I issue a full VAT invoice for all services or a receipt. Welcome VENOM Tuning Studio Karczówka 3 88-180 Złotniki Kujawskie tel. +48 737 167 112 www.VENOMtuningSTUDIO.com Facebook fanpage: https://facebook.com/venomtuningstudio/ e-mail: [email protected] #venomtuningstudio #tuning #chrysler #chrysler300m #300m #3.5v6 #przepustnica #moreairmorepower #optymalizacja #porting #thinblade #throttlebody #custom #tb #morepowermorefun #cartuning #carswithoutlimits (w: VENOM Tuning Studio) https://www.instagram.com/p/B4oDYMeprjS/?igshid=17g852nclnlep
