Jul 12, 2025
suspensy
3D Artist
artstation
More from «Artstation» here
seen from Hong Kong SAR China
seen from Russia
seen from United States
seen from United States
seen from Italy
seen from United States
seen from United States
seen from United States
seen from United States
seen from Germany
seen from United States
seen from United States
seen from United States
seen from Italy
seen from Pakistan
seen from Italy
seen from United Kingdom
seen from United States
seen from United Kingdom
seen from United Kingdom
suspensy
3D Artist
artstation
More from «Artstation» here
Überscopes (2013) 20×30cm / fujicolor metallic paper / 5mm polished acrylic / fixings http://opacity.ru/Uberbenutzerschnittstelle
High-Power Multimode Fiber Collimator: High Damage Threshold and Large-Core Beam Output Solution
With the rapid development of industrial lasers, fiber sensing, medical equipment, and scientific research systems, the demand for high-power multimode fiber transmission devices continues to grow. Especially in high-power laser coupling and long-distance beam transmission applications, traditional single-mode collimators are no longer sufficient to meet the requirements for high power handling capability and large beam output.
As a result, High-Power Multimode Fiber Collimators have become key components in high-power optical systems due to their high damage threshold, large-core fiber compatibility, and stable beam output performance.
What Is a High-Power Multimode Fiber Collimator?
A high-power multimode fiber collimator is an optical device that converts divergent light emitted from a multimode fiber into a parallel beam. It is widely used in:
High-power laser output systems
Laser coupling systems
Industrial laser processing
Medical laser equipment
Laser measurement and sensing
Fiber optic illumination systems
Scientific research platforms
Compared with standard fiber collimators, high-power versions focus more on:
Optical power handling capability
Thermal stability
Coating durability
Large-core fiber compatibility
Long-term operational reliability
Key Features of High-Power Multimode Fiber Collimators
1. High Damage Threshold Design
In high-power laser systems, the damage threshold of optical components is extremely important.
High-power multimode collimators are typically designed with:
High-durability optical coatings
Low-absorption lens materials
Precision thermal management structures
Metal packaging for enhanced heat dissipation
These features effectively reduce issues caused by high-power lasers, including:
Coating burn damage
Fiber end-face damage
Thermal drift
Beam distortion
Suitable for:
Continuous-wave (CW) laser systems
Pulsed laser systems
Power levels ranging from several watts to tens of watts
2. Support for Large-Core Multimode Fibers
Compared with single-mode fibers, multimode fibers usually have much larger core diameters, such as:Fiber TypeCore Diameter50/125μm50μm62.5/125μm62.5μm105/125μm105μm200/220μm200μm400μm Fiber400μm
Large-core structures provide several advantages:
Higher optical power handling
Reduced power density
Improved coupling tolerance
Enhanced system stability
This makes them particularly suitable for high-power laser transmission applications.
Advantages of Large Beam Output
High-power multimode collimators can achieve:
Large-diameter collimated beam output
Long working distances
Uniform beam distribution
Lower divergence angles
By optimizing focal length and NA parameters, different beam sizes can be achieved:Working DistanceBeam Spot Size100mm1~2mm500mm2~5mm1000mmLarger beam output
Ideal for:
Laser marking
Laser illumination
Laser scanning
Laser ranging
Industrial vision systems
Common Operating Wavelengths
High-power multimode fiber collimators commonly support:
405nm
450nm
520nm
635nm / 637nm
808nm
915nm
976nm
1064nm
1310nm
1550nm
Customized AR anti-reflection coatings are available for different wavelengths to minimize reflection loss and improve transmission efficiency.
Packaging Options
Different packaging structures are available depending on application requirements.
Metal Tube Package
Features:
Excellent heat dissipation
High structural stability
Suitable for high-power applications
SMA905 Interface
Widely used in:
Laser equipment
Spectroscopy systems
Medical devices
FC / SMA / Custom Interfaces
Available options include:
FC connectors
SMA connectors
Bare fiber output
OEM customized structures
Difference Between Multimode and Single-Mode Collimators
ItemMultimode CollimatorSingle-Mode CollimatorFiber Core DiameterLargeSmallPower HandlingHighLowerBeam QualityLowerBetterCoupling ToleranceMore FlexibleMore CriticalMain ApplicationHigh-power transmissionPrecision communication
For high-power applications, multimode solutions are generally more reliable.
Typical Application Areas
Industrial Laser Systems
Used in:
Laser cutting
Laser welding
Laser marking
Medical Laser Equipment
Applied in:
Laser therapy
Photodynamic systems
Medical illumination
Fiber Optic Sensing
Suitable for:
Fiber testing
Industrial monitoring
Scientific measurement
Research and Laboratory Systems
Used for:
Laser experiments
Beam shaping
Optical platforms
How to Select the Right High-Power Multimode Fiber Collimator
The following parameters should be carefully considered:
1. Fiber Type
Examples:
50/125μm
105/125μm
200μm
2. Numerical Aperture (NA)
Different NA values affect:
Divergence angle
Beam size
Coupling efficiency
3. Operating Wavelength
Must match the corresponding optical coating.
4. Working Distance
Determines the output beam size.
5. Output Beam Requirements
Including:
Beam spot diameter
Beam parallelism
Divergence angle
6. Power Level
Need to confirm:
Continuous power
Peak power
Operating environment
Conclusion
With the continuous advancement of high-power laser technology, high-power multimode fiber collimators are becoming essential components in industrial and scientific optical systems.
Their major advantages include:
High damage threshold
Large-core fiber compatibility
High power handling capability
Stable beam output
Flexible customization options
For applications requiring high reliability and stability, selecting the right high-power multimode fiber collimator can significantly improve the overall performance and lifetime of the optical system.
High-Power Multimode Fiber Collimators have become key components in high-power optical systems due to their high damage threshold, large-co
100μm Fiber Collimator: Why is 1550nm the Most Commonly Used Wavelength?
In fiber optic communication, sensing, and precision optical systems, fiber collimators are crucial bridges connecting optical fibers to free-space optical paths. When you see a fiber collimator specified as “100μm,” it is almost always designed and optimized for the 1550nm wavelength. This is not a coincidence, but a necessary choice determined by fiber characteristics, physical laws, and industry demands.
This article will delve into the reasons behind 1550nm becoming the “gold standard” for 100μm fiber collimators and explain its core application scenarios.
I. Core Reason: Natural Compatibility with Single-Mode Fiber
To understand the wavelength selection, we must first understand the meaning of the number “100μm.” This usually refers to the cladding diameter of the optical fiber, while the core diameter, which transmits light, is only about 8-10μm. This size design is intended to achieve single-mode transmission at a specific wavelength – that is, only one fundamental mode light spot is transmitted in the fiber, which avoids multimode dispersion and ensures high fidelity and long-distance transmission quality of the signal.
The key point is: the single-mode condition is directly related to the wavelength.
1. Low-Loss Window: The loss curve of silica glass fiber has two low points, near 1310nm and 1550nm. The loss at 1550nm is even lower (typically 0.2 dB/km), which is more advantageous than 1310nm (typically 0.35 dB/km), especially for long-distance transmission.
2. Zero-Dispersion Point and Low-Dispersion Region: 1310nm is the zero-dispersion point of standard single-mode fiber, but 1550nm is located in the lowest loss window of the fiber. Modern fibers, through techniques such as “dispersion shifting,” can also make the dispersion in the 1550nm region very small, perfectly balancing the two core requirements of low loss and low dispersion. 3. Mode Field Diameter Matching: At a wavelength of 1550nm, the mode field diameter (MFD) of a 100μm clad single-mode fiber is approximately 10.4μm. The lenses of fiber collimators (such as C-lenses and GRIN lenses) are specifically optimized for this wavelength and mode field size to ensure the highest coupling efficiency and minimum return loss. If other wavelengths (such as 850nm) are used, the mode field matching will be poor, resulting in significant insertion loss.
II. Industry-Driven Amplifier Technology: The Rise of EDFA
*The establishment of the dominant position of 1550nm is largely due to a revolutionary technology—the erbium-doped fiber amplifier (EDFA).
*The operating bandwidth of EDFA (C-band: 1530nm-1565nm) perfectly covers the 1550nm window.
*EDFA can directly amplify optical signals without prior photoelectric conversion, which has greatly promoted the development of wavelength division multiplexing (WDM/DWDM) technology, making it possible to transmit dozens or hundreds of channels of different wavelengths in a single fiber, and all of this is centered around the 1550nm wavelength.
Therefore, all related passive components, including 100μm fiber collimators, isolators, circulators, and wavelength division multiplexers, naturally use 1550nm as the standard operating wavelength.
III. Typical Application Scenarios of 100μm/1550nm Collimators
Based on the above advantages, these collimators are widely used in:
1. Long-haul trunk lines and metropolitan optical networks: As key components for optical path routing, isolation, and switching in DWDM systems and optical cross-connect (OXC) nodes.
2. Fiber optic sensing systems: In high-performance sensors based on interference principles, such as fiber optic gyroscopes (FOGs), hydrophones, and seismic wave detection, extremely low noise and stable interference are required, and 1550nm single-mode light sources and collimators are standard configurations.
3. Optical instruments and test and measurement: As the starting and ending points of the optical path, used to test the performance of other optical components (such as filters and modulators). LiDAR and Free-Space Communication: Used to collimate 1550nm laser light (eye-safe wavelength) from optical fibers into a parallel beam for transmission in free space.
IV. Other Wavelength Options: When would they differ?
*Although 1550nm is the absolute mainstream, in specific circumstances, 100μm collimators can also be designed for other wavelengths:
*1310nm window: Primarily used in some metropolitan area network access or short-distance transmission scenarios, where loss is less critical than in long-distance transmission, and equipment costs may be slightly lower. *Special wavelengths: Such as 1064nm (commonly used in laser processing and medical applications), 980nm/1480nm (as pump wavelengths for EDFA), etc. These are usually customized requirements and require special specifications and customized lens coatings.
Conclusion
Choosing 1550nm as the standard wavelength for 100μm fiber collimators is the optimal solution resulting from the combined effects of fiber physical characteristics, the evolution of communication technology (especially EDFA and WDM), and market scale effects. It represents the perfect combination of low loss, low dispersion, high performance, and high compatibility. In most systems involving single-mode fiber transmission and processing, the 100μm collimator at 1550nm is your default and reliable choice.
In fiber optic communication, sensing, and precision optical systems, fiber collimators are crucial bridges connecting optical fibers to fre
1550nm polarization-maintaining fiber collimator
Features
Low Insertion Loss
High Return Loss
Highly Reliability and Stability
Applications
Fiber Laser
Fiber Sensor
Fiber Components
Nanning Xionghua Photoelectric Technology Co., Ltd. produces: optical switch, MEMS optical switch, OLP, VOA optical attenuators, WDM, optica
The F550-3LS1 High Precision Optical Collimator Kit includes a large screen & 3 optical tubes for ultimate calibration convenience. it's the
F550-3LS1 Laser Collimator feature
Engineered with an F=550mm focal length, the High Precision Optical Collimator delivers unwavering accuracy for calibrating total stations and theodolites, ensuring your surveying data is reliably precise and project-ready.
This comprehensive kit features a large-format screen (without split screen) for a wide 20-25cm visual range, enhancing usability in all lighting conditions.
F550-3LS1 Laser Collimator includes three versatile parallel optical tubes and one photoelectric integrated tube, offering a complete solution for diverse calibration needs right out of the box.
Simulink alternative