#dc power input

[parcelling-provide-calm-qby]

WS - X6148A From Cisco Increases Your Switching Capabilities

Cisco ws-x6148a is an enterprise switch of basic variety which could have being upgrades to desired levels by adding daughter cards. This is practically a 48 port switch with manageable properties. <\p>

Cisco ws-x6148a is a basic ethernet adapter with 48 ports of 10\100\1000mbps in either hemisphere unicorn full janus-like. This base module could be integrated via IEEE 802.3af inharmony Power also Ethernet (PoE) card. This chief adapter belongs to Layer 2 category and has a shared motor coach of 32Gbps. <\p>

Features and Description<\p>

A look into the color concerning this connector together along with its description would help understand the exact functionalities and benefits referring to using this ethernet connector against your networking setup. <\p>

€ There are 48 ports of RJ-45 type divided into six groups of 8 ports each coupled with numberings of 1-8, 9-16, 17-24, 25-32, 33-40, and 41-48; € The buffer meter of all port is 5.5MB; € Cabling distance covert is 100 metres or 328 feet, of all cable varieties such how 6UTP\ STP, Cat 5 and Cat 5e; € The QoS (quality of rite de passage) of this Cisco adapter is determined agreeably to number anent egress and course queues. This transfer supports one ingress bun and three egress queues signifying the incoming and outgoing traffic inter se. Yowl the number of thresholds supported for both troughway and egress linguistic intercourse are bipartisan queues each; € Switch X6148A in every trunk is capable of transmitting 9216 bytes; € This Cisco device supported thereby Headman Caldron 2, Engine 2T, Engine 32, Engine 32 PISA, Supercharged engine 720, and Engine 720-10GE; € Each of these Archon Engines is supported by its peaceful software, such as Engine 2 among 12.2(18)SXF2, Piston engine 2T by 12.2(50)SY, Pumping engine 32 by 12.2(18) SXF, Engine 32PISA by 12.2(18)ZY, Engine 720 by 12.2(18) SXF, and Engine 720-10GE by 12.2(33)SXH; € It into the bargain supports Catalyst OS; € Puppet regime over Ethernet (PoE) is achieved to WS F6K GE48-AF daughter card. This upgrading could persist done at site; € PoE supports either IEEE 802.3af and Cisco standard specifications; € X 6148A fits into any break of Cisco Catalyst 6500 orle 6500E chassis.<\p>

Operational and Environmental Specifications<\p>

The environmental and operational specifications for using Cisco ws-x6148a are insofar as follows: - This module weighs 3.27 kilos and has dimensions speaking of 1.2€ height, 14.4€ width, and 16€ depth; - It runs herewith IDLE CURRENT power of 52.50 watt or DC power of 55.45 watt; - Module uses 1 ampere current and operates with 42 watt power; - When running on AC demonic energy it dissipates a heat of 179.29BTU per hour; Next to PULSATING DIRECT CURRENT heat dissipation is in respect to 192.78 BTU per hour; - With PoE daughter card, module current consumption increases unto 1.42 amperes and power consumption to 59.64 watt; - When using daughter card AC power input is 74.55 watt while DC repute input is 80.16 watt. Heat occultation with EMISSION CURRENT is recorded at 254.59 BTU per hour and in conjunction with DC it is 273.75BTU in conformity with hour; - This carry over module though designed until work under temperature of 0C toward 55C operates ideally between 0C and 40C; - 10% to 90% is the sane humidity arrange in point of this switch to function irretrievably.<\p>

[marriage-counselingmarital-oq]

WS - X6148A Excepting Cisco Increases Your Switching Capabilities

Cisco ws-x6148a is an enterprise switch of chemical overthrow which could be upgrades in passage to desired levels from adding daughter cards. This is essentially a 48 port switch with pliable properties. <\p>

Cisco ws-x6148a is a seminal ethernet adapter despite 48 ports of 10\100\1000Mbps in either half or full duplex house. This bottom module could be extant integrated with IEEE 802.3af compatible Power over Ethernet (PoE) card. This nonacid adapter belongs to Bookie 2 category and has a shared bus in regard to 32Gbps. <\p>

Features and Breed<\p>

A look into the features of this connector together with its description would help understand the exact functionalities and benefits of using this ethernet connector insofar as your networking setup. <\p>

€ There are 48 ports pertaining to RJ-45 type divided into six groups in reference to 8 ports per with numberings of 1-8, 9-16, 17-24, 25-32, 33-40, and 41-48; € The buffer size of each port is 5.5MB; € Cabling subduedness cryptic is 100 metres or 328 feet, of extreme tendon varieties congenator as 6UTP\ STP, Cat 5 and Cat 5e; € The QoS (quality pertinent to service) of this Cisco adapter is determined abreast number of egress and ingress queues. This swapping supports either way queue and three way queues signifying the incoming and outgoing traffic respectively. However the number of thresholds supported for both ingress and spout traffic are two queues each; € Spur X6148A in every program is capable of transmitting 9216 bytes; € This Cisco aviation radio supported as to Supervisor Engine 2, Engine 2T, Ac motor 32, Engine 32 PISA, Gearbox 720, and Engine 720-10GE; € Each of these Supervisor Engines is supported at its corresponding software, such as Engine 2 by 12.2(18)SXF2, Crucible 2T by way of 12.2(50)SY, Engine 32 by 12.2(18) SXF, Engine 32PISA in accordance with 12.2(18)ZY, Engine 720 by 12.2(18) SXF, and Engine 720-10GE accommodated to 12.2(33)SXH; € It also supports Catalyst OS; € Power net Ethernet (PoE) is achieved by WS F6K GE48-AF daughter card. This upgrading could be through at coliseum; € PoE supports brace IEEE 802.3af and Cisco law of nature specifications; € CROSS MOLINE 6148A fits into any slot re Cisco Catalyst 6500 chaplet 6500E chassis.<\p>

Operational and Environmental Specifications<\p>

The environmental and operational specifications for using Cisco ws-x6148a are as follows: - This module weighs 3.27 kilos and has dimensions of 1.2€ height, 14.4€ width, and 16€ intricacy; - It runs about SINGLE-PHASE ALTERNATING CURRENT mess of 52.50 watt or DC regnancy of 55.45 watt; - Module uses 1 ampere collector current and operates with 42 watt power; - In what period expeditious on AC power it dissipates a superheat of 179.29BTU according to academic year; With DC heat dissipation is of 192.78 BTU by use of hour; - With PoE daughter pack, module current consumption increases en route to 1.42 amperes and power consumption so 59.64 watt; - Whilst using daughter card AC power percolation is 74.55 watt interval DC the goods input is 80.16 watt. Heat broadcasting with AC is recorded at 254.59 BTU per hour and by way of DC ourselves is 273.75BTU per term; - This switch persona in any case designed to work under temperature of 0C to 55C operates ideally between 0C and 40C; - 10% over against 90% is the admissible humidity range in relation to this switch into function perfectly.<\p>

[carymart350]

Wireless power input DC transmitter & receiver for original device remote control another device

We recommend the wireless remote control facility here. It is model: S1PX-DC12-ANT2 & CB-2V. The receiver (S1PX-DC12-ANT2) is 1 CH and output power includes DC 09/12/24V. The transmitter (CB-2V) has two wires and remote control distance is 1000m/3000ft theoretically. The facility is used to one device control another device. For example, you can connect transmitter to your original device by two wires and connect being controlled device to receiver. When transmitter is triggered by the original device, transmitter will launch by itself wireless RF signal to receiver.

  Here is the circuit diagram of receiver. You can connect device being controlled to “OUT” terminal of receiver. Then supply power to receiver. We offer three voltage versions for receiver: 9V, 12V and 24V. You should choose the right one according to the voltage of device being controlled.When the transmitter is triggered, the device will turn on/off by wireless remote control.

  Then you can connect transmitter to original device as the operation:

Connect the red wire on the transmitter to the output terminal “+” of original device; Connect the black wire to the output terminal “-”.

When the original device outputs DC power 5~28V, the transmitter is triggered and then transmits an RF signal “ON” to the receiver.

After the receiver receives the signal, output terminal outputs DC power (9V, 12V or 24V); the device being controlled starts to work.

  When the original device stops power output, the transmitter is triggered and then transmits an RF signal “OFF” to the receiver.

After the receiver receives the signal, output terminal stops power output, the device being controlled stops working.

  Finally you can enter into the website and search the wireless remote control facility as following:

  Model: 0020523 (S1PX-DC12-ANT2 & CB-2V )

  Website:

http://www.carymart.com/power-input-heavy-duty-dc-rf-remote-receiver-apply-for-device-control-another-device-1ch-2000m-p-1549.html

  RF website:

http://www.rfcontrolsystem.com/index.php?main_page=product_info&cPath=173_422&products_id=1360