Aug 2, 2023
seen from France
seen from United States
seen from United States
seen from United States
seen from United States
seen from Russia
seen from Japan
seen from Australia
seen from United Kingdom
seen from T1
seen from United Kingdom
seen from Malaysia
seen from China
seen from Oman
seen from Germany
seen from Denmark
seen from Czechia
seen from Türkiye
seen from Malaysia
seen from T1
Emerald queen - 👑 - Available here
A few months ago I found these really cute little gold decals, I couldn't decide for ages what kind of dice to make with them, so in the end I put a request out on Insta stories for colour suggestions and then again for people to vote between the top 3 suggestions, which were Green, Purple and Red.
When the final vote settled for green the green lover in me thought well of course! So I added a hint of white to make the little wisps in this pour as I didn't want the blanks to just be plain green.
So here they are Emerald Queen in all there glory, I chose this name as they felt quite classy and regal and TBH it was the first thing that popped into my head when I was putting together the shop listing.
I hope you love them as much as I do! And let me know who you think would be the perfect character for these dice.
7 Piece set - double cast set using blanks and gold decals These dice are hand poured, sanded and polished before being Inked. As well as be
My giant Lifesize 3D and fully neon Deadpool. In honor of Deadpool 3. Next comes the resin
1 - From Within 2 - Flurry 3 - Rock Bottom 4 - Thanks 5 - Divine 6 - Goblin 7 - Circumnavigate 8 - Petri Dish Grid
Klari uses the creative process in both painting and science as metaphors for one another: for curiosity and exploring and documenting the natural and unnatural world with a sense of wonder and hope. Currently working in San Francisco, her work has been widely internationally exhibited and included in the collections of Stanford University, Google, The Chan Zuckerberg Initiative, Merck Pharmaceuticals, Genentech, and The Gates Foundation.
Dimensions: 6 inch diameter x .75 inch deep
Materials: Epoxy Polymer in large sized standard Petri dish
Klariart.com
Epoxy with real pressed flowers from the mountains I live in ❣️
Single Component Paint vs Two Component Paint: Advantages, Disadvantages, and Practical Applications
9 Best Garage Flooring Ideas and Options
Your concrete garage floor withstands considerable wear and tear from moisture, oil drips, chemical spills, and road salt as it ages. Applying a garage floor paint, coating, or covering will enhance its appearance and protect it against stains and deterioration while concealing cracks and other surface issues. Furthermore, it will simplify the cleaning process.
Various options for garage flooring are available, but will they be suitable and look good in your garage? It depends. This guide outlines the advantages and disadvantages of each option to help you select a floor that is practical, durable, and cost-effective.
Types of Garage Floor Coverings
There are two main types: coatings and coverings. If your garage floor is in good condition, either option may be suitable. However, if your floor is heavily pitted or has numerous cracks or imperfections, a covering is often better as it conceals the damage. A coating, even a low-sheen one, tends to highlight blemishes.
Coverings are also generally unaffected by moisture problems that can cause coatings to peel.
Garage Floor Coatings
Coatings include floor paints, epoxy paints, stains, and sealers. Coatings are typically less expensive than coverings if you apply them yourself. They offer protection against stains, corrosive chemicals (such as road salts), and moisture ingress. However, coatings can fail for two reasons: a damp concrete substrate and inadequate floor preparation.
Coatings should not be used where ground moisture rises through the concrete and keeps it consistently damp. Moisture prevents the coating from adhering properly to the concrete, leading to the coating soon de-laminating, chipping, and flaking. Therefore, it is crucial to test your concrete slab for moisture before applying a coating.
The main drawback? Coatings require several hours of meticulous floor preparation.
Depending on how soiled or greasy your floor is, this preparation can involve intensive cleaning with a pressure washer, using solvents or degreasers to remove any existing sealers, grease, or previous coatings. You must also repair cracks, holes, and other surface issues, and finally, etch the concrete with a suitable acid (like diluted hydrochloric acid, often sold as 'brick cleaner' or 'spirit of salts' in the UK) to ensure it is completely clean and ready to accept the coating.
It is advisable to check online reviews to determine the best garage floor paint for your requirements.
Garage Floor Paint
Garage floor paint is essentially a more resilient version of wall paint. It is by far the least expensive coating. It is applied with a roller just like other paints, with no complex, unfamiliar steps. It is also simple to touch up damaged areas or completely re-coat the floor.
Latex (or acrylic) floor paint is generally easier to apply and clean up than oil-based paint. It dries to a low-sheen flat finish, while oil-based paint dries to a high gloss. Oil-based paints often require a primer coat and are generally considered more durable than latex/acrylic.
Overall, floor paint is not as tough as other coatings and is particularly vulnerable to road salts and other chemicals. Under typical use, you may need to touch up areas every year or two.
Epoxy Paint
Most epoxies are two-part formulas that you mix immediately before rolling them on. (One-part epoxies are available premixed.) With correct site preparation and application, this is arguably the most hard-wearing floor finish available—and it provides an attractive, glossy appearance.
Epoxies can be challenging to work with because the floor preparation is so critical, and the mixture has a limited 'pot life,' meaning you must work quickly to apply it before it hardens. Furthermore, you cannot drive on the floor until it has fully cured, which can take up to a week.
A typical DIY epoxy kit provides enough primer (or sealer) and epoxy for one coat of each on an average single-car garage floor. For enhanced durability, consider applying a second epoxy coat or a final coat of urethane sealer. Depending on wear, re-coating may be necessary every three to five years.
Stained Concrete Garage Floor
A concrete stain is not strictly a coating; it is a translucent decorative colourant that soaks into the concrete, creating a pigmented, marbled effect resembling natural stone.
It typically requires two coats, applied with a roller or sprayer, then immediately worked into the concrete with a nylon scrubbing brush. The stain itself does not protect the concrete. After it dries, the surface should be rinsed, and then one or two coats of urethane sealer should be applied to protect against moisture, chemicals, and stains.
Depending on floor traffic, you may need to wax the sealer annually, and touch up the stain and reseal the floor every two years.
Garage Concrete Sealers
Concrete floor sealers are similar to floor paint but are generally tougher. After paints, they are the least expensive coating and are easy to apply with a brush or roller. They dry to a clear satin or semi-gloss finish, depending on the product, and can also be purchased tinted. Both water-based and solvent-based versions are available.
Acrylic/Latex Sealer: Like floor paint, acrylic/latex sealer is vulnerable to chemicals and is not as tough as epoxy, so it will benefit from an annual protective waxing or reapplication every few years. Acrylic/latex sealer adheres better to bare concrete than urethane sealer, which is why it is sometimes used as a primer for oil-based floor paint or epoxy.
Urethane Sealer: Urethane sealer is significantly tougher than acrylic/latex sealer but does not bond well with bare concrete. It provides a clear, high-gloss finish that resists chemicals better than epoxy alone and is less likely to yellow in sunlight. This is why it is often used as a seal coat over epoxy and concrete stain. However, urethane sealer is more expensive than acrylic. Solvent-based versions also require the use of a respirator during application.
Garage Floor Coverings
Rigid Interlocking Tiles
These rigid tiles are made of a stiffer plastic than flexible tiles, allowing them to handle heavier loads, which is important if you regularly use a trolley jack or axle stands. They also expand and contract less than flexible tiles during temperature extremes.
They are available in numerous colours and styles, including perforated versions that allow spills and snowmelt to drain through, which reduces the risk of mould forming beneath the tiles and slippery patches on the surface. They are easy to clean and generally more chemical resistant than softer plastic tiles or mats.
A drawback is that they produce a noticeable 'clacking' sound when walked upon. Like other coverings, they are straightforward to install: simply align the tiles, step on them, and click the male and female loops together.
Interlocking Flexible Tiles
These are typically 30cm x 30cm or 45cm x 45cm flexible plastic tiles that come in a variety of patterns and colours, allowing for custom designs.
For installation, the tiles are cut to size with a utility knife, then the interlocking edges are tapped or pressed together with a rubber mallet or wallpaper roller. They offer better slip resistance than rollout flooring. Compared to rigid snap-together tiles, they provide better resistance to liquid seepage through the seams and are more comfortable underfoot.
Like rollout mats, flexible tiles are susceptible to staining. However, unlike mats, damaged tiles can be easily replaced. The tiles will contract and expand with significant temperature changes and exposure to direct sunlight, so it is necessary to leave an expansion gap near walls and other obstacles.
Rollout Flooring Mats
Rollout mats are thick, rubbery products available in various lengths, widths, colours, and patterns. A single mat can be used under a car, or multiple mats can be laid together to cover an entire garage floor.
The mats are easy to clean and reposition. To install, sweep the floor, unroll the flooring, butt the edges together or overlap them, and trim to fit with a utility knife. They are durable, but like most coverings, they can be permanently stained by hot tyre treads and chemicals. These mats can also be slippery in wet or icy conditions and are susceptible to gouging from motorcycle kickstands, hot metal fragments, and gravel.
In extreme climates, they may expand and contract by up to two per cent. To allow the mats to move during temperature fluctuations, they should not be taped to the floor at the edges.
Vinyl Composition Tile (VCT)
Vinyl composition tile (VCT) is a product commonly used in commercial settings, schools, and kitchens. Although manufacturers generally do not recommend it for garages, many people do install it there. Under the right conditions, it is an option worth considering.
One advantage is the low cost. It also comes in numerous colours and patterns, offering considerable scope for floor design.
However, in terms of preparation and application, VCT is closer to a coating than a covering. Once the concrete is clean and degreased, adhesive is trowelled on and the vinyl tiles are laid. A week's wait is then required before applying three or more coats of sealer, depending on the desired gloss level and durability.
Source: www.FamilyHandyman.com