#knobhardware

[roussodesigns1]

Door Knob Latch Retrofit Kit Tubular with Spindle - Fits Your Antique or Threaded Type Knobs in Modern Doors. Fits 2 3/8" and 2 3/4" Backset

For just $39.95 Retrofit Passage hardware adjustable to fit 2-3/8" or 2-3/4" backset A Limited addition-Handcrafted of the finest materials If you h…

For just $39.95 Retrofit Passage hardware adjustable to fit 2-3/8" or 2-3/4" backset A Limited addition-Handcrafted of the finest materials If you have Antique knobs with backplates, this is what is needed to install in modern doors Available in Oil Rubbed Bronze, Brushed Nickel, and Polished Brass This listing is for 1, 2 or 3 sets of Retrofit Passage hardware to fit 2-3/8" or 2-3/4" backset. If you have Antique knots with backplates, this is what is needed to install in modern doors. Tubular Latch Set is used to retrofit modern pre-drilled doors for Antique spindle type knobs or reproductions. We also include a standard 5/16" treaded spindle. The latch face plate is 2-1/4" tall x 1", the striker plate is 2-1/4" tall x 1-7/8" wide. All sets are tested and shipped as complete sets including all mounting hardware. Please Visit More of My Shop at: https://www.etsy.com/shop/RoussoDesigns Adj3-

[roussodesigns1]

Your Door Knobs Installed - Our Special Engineered Retro-Fit Kits - Will Install Even Difficult to Fit Knobs! Your Knobs With This Kit!

For just $69.95 Passage, Privacy, Custom, French Door Kit and Dummy Door knob Kits are Available with everything to install except the Knobs. Brushed Nickel, Oi…

For just $69.95 Passage, Privacy, Custom, French Door Kit and Dummy Door knob Kits are Available with everything to install except the Knobs. Brushed Nickel, Oil Rubbed Bronze, Polished Brass, and Polished Chrome. Everything except the knobs. (We also have the knobs if needed) *Select a Kit Below and Choose it in the Drop-Down Menu Above. PASSAGE RETROFIT KIT: Knob turns - Has NO Lock - 2 3/8" Backset PASSAGE RETROFIT KIT: Knob turns - Has NO Lock - 2 3/4" Backset PRIVACY RETROFIT KIT: Knob turns - Has Lock - DOOR SWINGS INTO ROOM - 2 3/8" Backset PRIVACY RETROFIT KIT: Knob turns - Has Lock - DOOR SWINGS INTO ROOM - 2 3/4” Backset CUSTOM PRIVACY RETROFIT KIT: Knob turns - Has Lock - DOOR SWINGS OUT TO HALL - 2 3/8” Backset CUSTOM PRIVACY RETROFIT KIT: Knob turns - Has Lock - DOOR SWINGS OUT TO HALL - 2 3/4" Backset STANDARD FRENCH DOOR RETROFIT KIT: Knobs do not turn / Knobs on 2 sides of 1 door DUMMY FRENCH DOOR KNOB RETROFIT KIT: Knobs do not turn / Knobs on 1 side of 2 doors Backset: The measurement from the edge of the door to the middle of the big hole. * Unbeatable Customer Service - Four Generations of Rousso’s to help You * Fast Replies to Convos, You will talk to a Rousso * We are always here to help you before, during and after your purchase! * Handmade and Altered Reproductions, so perfect, they are interchangeable with antique hardware. * Excellent Customer Service! Quick replies to Convos! * In the unlikely event you have a problem, we will "fix It" guaranteed. *A perfect reproduction to fit Antique Knobs of the early 1900s period. *This kit is everything You need to install your knobs in modern doors, right out of the box * Self-Connecting Rosette/Backplates-screws concealed on one side. * My family has 40 years of experience making hardware * Guaranteed to be the finest product or may be returned for a refund * From Our Family to Your Family - Beautiful Door Knobs to be loved...

[roussodesigns1]

Your Door Knobs Installed - Our Special Engineered Retro-Fit Kits - Will Install Even Difficult to Fit Knobs! Your Knobs With This Kit!

For just $69.95 Passage, Privacy, Custom, French Door Kit and Dummy Door knob Kits are Available with everything to install except the Knobs. Brushed Nickel, Oi…

For just $69.95 Passage, Privacy, Custom, French Door Kit and Dummy Door knob Kits are Available with everything to install except the Knobs. Brushed Nickel, Oil Rubbed Bronze, Polished Brass, and Polished Chrome. Everything except the knobs. (We also have the knobs if needed) *Select a Kit Below and Choose it in the Drop-Down Menu Above. PASSAGE RETROFIT KIT: Knob turns - Has NO Lock - 2 3/8" Backset PASSAGE RETROFIT KIT: Knob turns - Has NO Lock - 2 3/4" Backset PRIVACY RETROFIT KIT: Knob turns - Has Lock - DOOR SWINGS INTO ROOM - 2 3/8" Backset PRIVACY RETROFIT KIT: Knob turns - Has Lock - DOOR SWINGS INTO ROOM - 2 3/4” Backset CUSTOM PRIVACY RETROFIT KIT: Knob turns - Has Lock - DOOR SWINGS OUT TO HALL - 2 3/8” Backset CUSTOM PRIVACY RETROFIT KIT: Knob turns - Has Lock - DOOR SWINGS OUT TO HALL - 2 3/4" Backset STANDARD FRENCH DOOR RETROFIT KIT: Knobs do not turn / Knobs on 2 sides of 1 door DUMMY FRENCH DOOR KNOB RETROFIT KIT: Knobs do not turn / Knobs on 1 side of 2 doors Backset: The measurement from the edge of the door to the middle of the big hole. * Unbeatable Customer Service - Four Generations of Rousso’s to help You * Fast Replies to Convos, You will talk to a Rousso * We are always here to help you before, during and after your purchase! * Handmade and Altered Reproductions, so perfect, they are interchangeable with antique hardware. * Excellent Customer Service! Quick replies to Convos! * In the unlikely event you have a problem, we will "fix It" guaranteed. *A perfect reproduction to fit Antique Knobs of the early 1900s period. *This kit is everything You need to install your knobs in modern doors, right out of the box * Self-Connecting Rosette/Backplates-screws concealed on one side. * My family has 40 years of experience making hardware * Guaranteed to be the finest product or may be returned for a refund * From Our Family to Your Family - Beautiful Door Knobs to be loved...

[roussodesigns1]

Door Knob Latch Retrofit Kit - Heavy Duty Tubular Latch, Spindle, Face Plate & Striker Plate to Fit Your Antique Knobs in Modern Doors

For just $49.95 * Excellent Customer Service! * Fast Replies to Convos Before, During, and Your are After Purchase. * Advance hardware hand engineered with fe…

For just $49.95 * Excellent Customer Service! * Fast Replies to Convos Before, During, and Your are After Purchase. * Advance hardware hand engineered with features that are not available by marketing firms with similar products * Finest Antique Reproductions 40 years of experience making hardware * Passage hardware to fit Standard 2-3/8" or 2-3/4" Backset (Please make your choice in the drop-down menu) * A Limited addition-Handcrafted of the finest materials * Our Wood Adaptors may be added. Send convo for information * Includes Our Self-Alining Split Threaded Spindle for easier installation Tubular Latch Kit is used to Retrofit Modern Pre-Drilled for Antique Threaded Spindle Type Knobs or Reproductions. Threaded Spindle, Removable latch face plate is 2-1/4" tall x 1," the striker plate is 2-1/4" tall x 1-7/8" wide. Guaranteed to your satisfaction. Please Visit My Etsy Shop at: https://www.etsy.com/Shop/RoussoDesigns 7.0 SS

[roussodesigns1]

Your Antique Knobs, Latch & Spindle + Our Retro-Fit Kit to fit Modern Pre-drilled Doors. 2-1/2" Rosettes + Our Original Wood Adaptors

For just $29.95 Your Antique Knobs, Tubular Latch, and Spindle. This is the Retrofit kit You need for Modern Pre-drilled Doors 1 Pair of our 2-1/2" Rosette…

For just $29.95 Your Antique Knobs, Tubular Latch, and Spindle. This is the Retrofit kit You need for Modern Pre-drilled Doors 1 Pair of our 2-1/2" Rosettes and Our Original Handmade wood adaptors. * A very Affordable Way to Install Antique Door Knobs for Modern Pre-Drilled Doors * Includes 2-1/2 -inch Rosettes and 2 of Our Original Wood Adapters * See Photo on How to Use Wood Adaptors. Latch and Spindle are for Example Only. * See Photo for the Kind of Knobs that Fit this Rosette If you have the antique knobs (or replicas), spindle and latch, this retrofit kit has all the hardware needed to install in your modern pre-drilled doors, stamped brass 2-1/2" rosettes, hand made wood adapters and matching screws to Retrofit Modern Pre-drilled Doors and Threaded Spindle. Installation Instructions will be included, although they are very simple. (1) Install your Latch, (2) Glue wood adapters with hot glue gun, (3) Secure door plates by tightening your Knobs, (4) Drill pilot holes and fasten door plates with the wood screw, (5) Then Adjust the door knobs and Bolt securely to the square side of the spindle. TOOLS NEEDED TO INSTALL THIS SET:, one 3/16" slotted screwdriver and one Phillips head screwdriver. One hot glue gun (wood glue if glue gun is not available) power drill to drill a pilot hole in the wood adapters. Guaranteed to your satisfaction with Three Generations of experience. A great value for homeowners to install as they are a little more labor-intense to install than our Premium sets. Over the years, we have made many improvements to assure that our products are superior cosmetically and enhanced engineering for easy installation with reduced future maintenance. To See My Entire Etsy Site Go to: https://www.etsy.com/shop/RoussoDesigns 1900W 2-1/2in-Rosette

[roussodesigns1]

Your Antique Knobs, Latch & Spindle + Our Retro-Fit Kit to fit Modern Pre-drilled Doors. 2-1/2" Rosettes + Our Original Wood Adaptors

For just $29.95 Your Antique Knobs, Tubular Latch, and Spindle. This is the Retrofit kit You need for Modern Pre-drilled Doors 1 Pair of our 2-1/2" Rosette…

For just $29.95 Your Antique Knobs, Tubular Latch, and Spindle. This is the Retrofit kit You need for Modern Pre-drilled Doors 1 Pair of our 2-1/2" Rosettes and Our Original Handmade wood adaptors. * A very Affordable Way to Install Antique Door Knobs for Modern Pre-Drilled Doors * Includes 2-1/2 -inch Rosettes and 2 of Our Original Wood Adapters * See Photo on How to Use Wood Adaptors. Latch and Spindle are for Example Only. * See Photo for the Kind of Knobs that Fit this Rosette If you have the antique knobs (or replicas), spindle and latch, this retrofit kit has all the hardware needed to install in your modern pre-drilled doors, stamped brass 2-1/2" rosettes, hand made wood adapters and matching screws to Retrofit Modern Pre-drilled Doors and Threaded Spindle. Installation Instructions will be included, although they are very simple. (1) Install your Latch, (2) Glue wood adapters with hot glue gun, (3) Secure door plates by tightening your Knobs, (4) Drill pilot holes and fasten door plates with the wood screw, (5) Then Adjust the door knobs and Bolt securely to the square side of the spindle. TOOLS NEEDED TO INSTALL THIS SET:, one 3/16" slotted screwdriver and one Phillips head screwdriver. One hot glue gun (wood glue if glue gun is not available) power drill to drill a pilot hole in the wood adapters. Guaranteed to your satisfaction with Three Generations of experience. A great value for homeowners to install as they are a little more labor-intense to install than our Premium sets. Over the years, we have made many improvements to assure that our products are superior cosmetically and enhanced engineering for easy installation with reduced future maintenance. To See My Entire Etsy Site Go to: https://www.etsy.com/shop/RoussoDesigns 1900W 2-1/2in-Rosette

[roussodesigns1]

Door Knob Adjustable Passage Latches + Custom Tooled Spindles To Install Your Antique Knobs and Replicas in Modern Doors. (Lot of 3 Latches)

For just $65.99 Door Knob Passage Latches (Adjustable) in Oil Rubbed Bronze, Brushed Nickel, and Polished Brass Finishes. Fits 2-3/8" & 2-3/4" Backset…

For just $65.99 Door Knob Passage Latches (Adjustable) in Oil Rubbed Bronze, Brushed Nickel, and Polished Brass Finishes. Fits 2-3/8" & 2-3/4" Backsets. * Old Fashion - Excellent Customer Service - Fast Replies to Emails! * Unbeatable Customer Service - Quick Reply to Convo * Fast Replies to Convos before, during and after purchase. * If you have Antique knobs with backplates, this is what is needed to install in modern doors * Passage Hardware to Fit 2-3/8" or 2-3/4" Backset * A Limited Addition-Handcrafted of the finest materials * Polished Brass, Brushed Nickel and Oil Rubbed Bronze Finishes Available * Our Photos are Actual Photos we took of Products * Actual photographs we took, not computer generated drawings * Guaranteed to be the finest product or you may return Your Purchase For a Full Refund * From Our Family to Your Family Beautiful Door Knobs to be loved for Generations to Come. 3 Sets Adjustable Passage Tubular Latches fits 2-3/8" or 2-3/4" backset. If you have Antique or Reproductions Spindle type knobs this all you need to install your door knobs in modern pre-drilled doors. Your Complete set will include 3 Tubular Passage Latches, 3 standard 5/16" threaded spindles, 3 latch faceplates 2-1/4" tall x 1," 3 striker plates 2-1/4" tall x 1-7/8" wide and all the mounting hardware needed. Guaranteed to your satisfaction. ADJ3-XX

[roussodesigns1]

Door Knob Adjustable Passage Latches + Custom Tooled Spindles To Install Your Antique Knobs and Replicas in Modern Doors. (Lot of 3 Latches)

For just $65.99 Door Knob Passage Latches (Adjustable) in Oil Rubbed Bronze, Brushed Nickel, and Polished Brass Finishes. Fits 2-3/8" & 2-3/4" Backset…

For just $65.99 Door Knob Passage Latches (Adjustable) in Oil Rubbed Bronze, Brushed Nickel, and Polished Brass Finishes. Fits 2-3/8" & 2-3/4" Backsets. * Old Fashion - Excellent Customer Service - Fast Replies to Emails! * Unbeatable Customer Service - Quick Reply to Convo * Fast Replies to Convos before, during and after purchase. * If you have Antique knobs with backplates, this is what is needed to install in modern doors * Passage Hardware to Fit 2-3/8" or 2-3/4" Backset * A Limited Addition-Handcrafted of the finest materials * Polished Brass, Brushed Nickel and Oil Rubbed Bronze Finishes Available * Our Photos are Actual Photos we took of Products * Actual photographs we took, not computer generated drawings * Guaranteed to be the finest product or you may return Your Purchase For a Full Refund * From Our Family to Your Family Beautiful Door Knobs to be loved for Generations to Come. 3 Sets Adjustable Passage Tubular Latches fits 2-3/8" or 2-3/4" backset. If you have Antique or Reproductions Spindle type knobs this all you need to install your door knobs in modern pre-drilled doors. Your Complete set will include 3 Tubular Passage Latches, 3 standard 5/16" threaded spindles, 3 latch faceplates 2-1/4" tall x 1," 3 striker plates 2-1/4" tall x 1-7/8" wide and all the mounting hardware needed. Guaranteed to your satisfaction. ADJ3-XX