#ledlightingdesigner

[inspiredled]

Inspired LED's Independence Dimmer for LED Lights is a dual switch system that can be quickly added to most lighting systems.

This kitchen is a plug and play system that is using power supplies, a Dual Independence Dimmer with two receivers, interconnect cables and custom flexible LED strips.

Measure available space for flex:

Start by measuring out the entire length of the area where the flex strips will be mounted. Once you have the full measurements of an area, you will need to   subtract 3” in order to make room for the cable connectors on each side. Before measuring the cabinets, it is a good idea to know where you plan on mounting the flex strips.

Read More : https://www.inspiredled.com/product/independence-dimmer-dual-switch-system/

You can also find us on the map: https://www.google.com/maps?cid=9146440743450455000

Follow Us on Facebook https://www.facebook.com/inspiredLED/

Inspired LED 1702 W 10th Pl, Tempe, AZ 85281 Phone: [phone]

[inspiredled]

LED dimmer technology has been taken to the next level with Inspired LED's Independence dimmer setup - It requires NO batteries, wiring, or power.

This kitchen is a plug and play system that is using power supplies, an Independence dimmer with two receivers, interconnect cables and custom flex strips.

Measure available space for flex:

Start by measuring out the entire length of the area where the flex strips will be mounted. Once you have the full measurement of an area, you will need to subtract 3” in order to make room for the cable connectors on each side. Before measuring the cabinets, it is a good idea to know where you plan on mounting the flex strips.

Read More : https://www.inspiredled.com/product/independence-led-dimmer-setup/

You can also find us on the map: https://www.google.com/maps?cid=9146440743450455000

Follow Us on Facebook https://www.facebook.com/inspiredLED/

Inspired LED 1702 W 10th Pl, Tempe, AZ 85281 Phone: [phone]

[inspiredled]

Remote control dimmer switch for LED lights makes your installation effortless. Connect the RF receiver to your lights & control with remote from anywhere.

This kitchen is a plug and play system that is using a plug in power supply, single zone RF remote dimmer, interconnect cables, custom flex strips and one angle adjust tube.

Measure available space for flex:

Start by measuring out the entire length of the area where the flex strips and lights will be mounted. Once you have the full measurement of an area, you will need to subtract 3” in order to make room for the cable connectors on each side. Before measuring the cabinets, it is a good idea to know where you plan on mounting the flex strips.

Read More : https://www.inspiredled.com/product/remote-control-dimmer-switch-for-led-lights-rf-system/

You can also find us on the map: https://www.google.com/maps?cid=9146440743450455000

Follow Us on Facebook https://www.facebook.com/inspiredLED/

Inspired LED 1702 W 10th Pl, Tempe, AZ 85281 Phone: [phone]

[inspiredled]

Swithc lighting outlets can be created in most spaces to control LED lighting panels and strips. Use this tutorial as a template for your home.

This Kitchen lighting is a plug and play system using plug in power supplies, custom flex strips and several cables. The power supplies are plugged into switched outlets that were installed above the cabinets so that the customer could turn the lights on and off from a wall switch.

Measure available space for flex:

Start by measuring out the entire length of the area where the flex strips will be mounted. Once you have the full measurement of an area, you will need to subtract 3” in order to make room for the cable connectors on each side. For this project, the customer had to measure out lengths for the tops of the cabinets and for the underside of the cabinets. Before measuring the cabinets, it is good idea to know where you plan on mounting the flex strips.

Read More : https://www.inspiredled.com/product/switched-lighting-outlets-design/

You can also find us on the map: https://www.google.com/maps?cid=9146440743450455000

Follow Us on Facebook https://www.facebook.com/inspiredLED/

Inspired LED 1702 W 10th Pl, Tempe, AZ 85281 Phone: [phone]

[inspiredled]

This in-line switch and dimmer with y cable setup makes tricky wiring situations (like above the microwave) a snap without hardwiring.

This kitchen lighting is a plug and play system using a plug in power supply, in-line switch, two custom flex strips and an over the microwave “Y” cable.

Measure available space for flex:

Start by measuring out the entire length of the area where the flex strips will be mounted. Once you have the full measurement you will need to subtract 3” in order to make room for the cable connectors on each side. For this project, the customer had decided to mount the flex strip along the front edge of the cabinet facing towards the backsplash in order to highlight the backsplash and help eliminate the reflection off of the counter top. This also allowed the customer to use one long strip on the right side of the microwave instead of having to use two flex strips and another cable.

Read More : https://www.inspiredled.com/product/push-button-dimmer-setup/

You can also find us on the map: https://www.google.com/maps?cid=9146440743450455000

Follow Us on Facebook https://www.facebook.com/inspiredLED/

Inspired LED 1702 W 10th Pl, Tempe, AZ 85281 Phone: [phone]

[inspiredled]

This in-line LED light switch requires no hardwiring, making DIY lighting simple and quick to install in any part of your home.

This kitchen lighting is a plug and play system using a plug in power supply, in-line switch, two cables and two custom flex strips.

Measure available space for flex:

To build this set up you will need to first measure out the entire length of the area where the flex strip will be mounted. Once you have the full measurement you will need to subtract 3” in order to make room for the cable connectors on each side. For this project, the customer had decided to mount the flex strip along the front edge of the cabinet facing towards the backsplash in order to highlight the backsplash and help eliminate the reflection of the LED’s off of the counter top. This also allowed the customer to use one long LED strip on the right side of the sink instead of having to use two flex strips and another cable.

Read more : https://www.inspiredled.com/product/push-button-dimmer-setup-2/

You can also find us on the map: https://www.google.com/maps?cid=9146440743450455000

Follow Us on Facebook https://www.facebook.com/inspiredLED/

Inspired LED 1702 W 10th Pl, Tempe, AZ 85281 Phone: [phone]

[inspiredled]

Plug-in LED lights provide a simple DIY solution to bright, energy-efficient lighting. To power lights, these strips only require a plug-in power supply. Best Price Guaranteed.

This kitchen lighting is a simple system using a plug in power supply and one long custom flex strip.

Measure available space for flex:

To build this set up you will need to first measure out the entire length of the area where the flex strip will be mounted. Once you have the full measurement you will need to subtract 3” in order to make room for the cable connectors on each side. In this case, with a measurement of 87” of available space the flex strip is made to 83.5” because that is the closest cut length. Before measuring the cabinets, it is a good idea to know where you plan on mounting the flex strips.

Read More : https://www.inspiredled.com/product/dome-kitchen-lighting-system/

You can also find us on the map: https://www.google.com/maps?cid=9146440743450455000

Follow Us on Facebook https://www.facebook.com/inspiredLED/

Inspired LED 1702 W 10th Pl, Tempe, AZ 85281 Phone: [phone]