#mileage correction

[eobdtooluk-blog]

Yanhua ACDP Module 39 For Benz MB HU7 Instrument Module Mileage Correction

Yanhua ACDP Module 39 MB HU7 Instrument Module Mileage Correction with License A105 for Mercedes A167 A213 A247 with Chip R7F701403

[eobdtooluk-blog]

Yanhua ACDP with Module 37 Correct Mileage for Benz A247 W177 A-Class HU6 Cluster

Yanhua Tech released a new YANHUA MB HU6-R7F71403-B Interface Board for Mercedes-Benz A247 W177 A-class HU6 instrument mileage correction. It works with Yanhua ACDP 1/ ACDP 2 and Module 37.

[auto-tools]

Can Yanhua Digimaster 3 Adjust 2012 Nissan Note 24C16 Mileage?

One customer wants to know if Yanhua Digimaster 3 can support the 2012 model Nissan Note 24C16 chip mileage adjustment. And he cannot find the path on the device.

Technical Support Email: [email protected] Wechat: [phone] Whatsapp: [phone] Skype: OBD2tool.co.uk

www.obd2shop.co.uk

[obd2gatecom]

Audi A3 2016 MQB Mileage Adjustment with OBDSTAR X300M Guide

Learn how to adjust odometer of Audi A3 2016 MQB using OBDSTAR X300M mileage correction tool, please follow these step-by-step instructions.

Steps

Open OBDSTAR X300M tool and select “Vehicles” option.

Choose “Mileage adjustment.”

Choose “Audi,” followed by “Audi V31.55”, wait for loading, initialization, and authorization processes to complete.

Choose “A3” model.

Select “MQB 2014.06 -” and note the message that indicates support for MQB dashboards of mainland and VDO.

Switch on the ignition of Audi A3>>proceed with the mileage adjustment process.

Confirm the current mileage value and input the new value you want to adjust.

Wait for communication and logging the system.

Dashboard Response: You will hear a ticking sound, and the dashboard lights will illuminate.

The tool will proceed with writing the new mileage data.

Mileage correction successful

By following these steps, you can effectively change the mileage of your Audi A3 2016 MQB using OBDSTAR X300M mileage correction tool.

OBDSTAR X300M mileage correction test on other Audi vehicles:

Audi q5 2011 ok

2004 Audi A4 ok

Audi A4 2013 ok

Audi Q5 2010 obd ok

Audi A5 2008 obd ok

Audi A4 2007 ok

04 Audi a4 rb4 ok

Audi A4 RB4 2004 ok

04 Audi a4 rb4 ok

Audi A4 2007 RB8 ok

2013 Audi s5 obd ok

2012 A1 Audi 1.4tfsi ok via obd

Audi s4 2008 is ok

Audi a4 2003 ok

Audi A8L 2009 reading and saving data by obd ok

Adjusting mileage by obd ok

Audi TT 2008 mileage ok

2010 Audi a3 works perfect

[obd2gate-com]

Audi A3 2016 MQB Mileage Adjustment with OBDSTAR X300M Guide

Learn how to adjust odometer of Audi A3 2016 MQB using OBDSTAR X300M mileage correction tool, please follow these step-by-step instructions.

Steps

Open OBDSTAR X300M tool and select “Vehicles” option.

Choose “Mileage adjustment.”

Choose “Audi,” followed by “Audi V31.55”, wait for loading, initialization, and authorization processes to complete.

Choose “A3” model.

Select “MQB 2014.06 -” and note the message that indicates support for MQB dashboards of mainland and VDO.

Switch on the ignition of Audi A3>>proceed with the mileage adjustment process.

Confirm the current mileage value and input the new value you want to adjust.

Wait for communication and logging the system.

Dashboard Response: You will hear a ticking sound, and the dashboard lights will illuminate.

The tool will proceed with writing the new mileage data.

Mileage correction successful

By following these steps, you can effectively change the mileage of your Audi A3 2016 MQB using OBDSTAR X300M mileage correction tool.

OBDSTAR X300M mileage correction test on other Audi vehicles:

Audi q5 2011 ok

2004 Audi A4 ok

Audi A4 2013 ok

Audi Q5 2010 obd ok

Audi A5 2008 obd ok

Audi A4 2007 ok

04 Audi a4 rb4 ok

Audi A4 RB4 2004 ok

04 Audi a4 rb4 ok

Audi A4 2007 RB8 ok

2013 Audi s5 obd ok

2012 A1 Audi 1.4tfsi ok via obd

Audi s4 2008 is ok

Audi a4 2003 ok

Audi A8L 2009 reading and saving data by obd ok

Adjusting mileage by obd ok

Audi TT 2008 mileage ok

2010 Audi a3 works perfect

[auto-tools]

How to use CGDI CG100 to do mileage repair for Volvo S80L

This post will show you how to use the CGDI CG100 tool to do mileage repair for Volvo S80L. Note: This tutorial was created by CGDI Technical Support and this is a share from a customer.

1. Check the car information (car type and car year). Got the car information from VIN-- Volvo S80L.

2. Check the current mileage. Better take a picture to record, we can see the current mileage is 160886 KM.

3. Remove the dashboard and check the chip number. The kilometers are stored in chip: 9S12H256

4. Connect CG100 software --> Programmer --> 9S12H256

5. Connect the wires according to the diagram.

6. Read the data (check the km if the same as shown).

7. Write your target mileage of 100910 KM and wait for the software to change.

8. Put the dashboard back in the car and everything is ok.

You may be interested in: How to activate CGDI CG100X Programmer Mileage repair for Mercedes GLC 2017 via CGDI CG100X For more technical services, please follow https://www.obd2shop.co.uk/service/

[auto-tools]

How to use Yanhua Digimaster 3 MEM ICP Solder-Free Adapter?

This is an operation guide on using Yanhua Digimaster 3 + MEM ICP solder-free programming adapter for mileage correction. Read this article to learn how to do it.

Accessories MEM-ICP adapter 3M fixed piece Solder-free programming bracket 8PIN chip clip 14PIN cable Yanhua Digimaster III Odometer module

Check the video to learn:

Installation 1. Confirm the location of the standard 8-pin EEPROM chip and crystal. Select an appropriate position to fix the 3M piece according to the crystal position and bracket length.

2. When crystal pin spacing is > 5mm, install the solder-free bracket to the A column. When crystal pin spacing is < 5mm, install the solder-free bracket to the B column(In this case, install it to the A column). The white probe is removable that can be used to short the crystal in different packages(In this case, adjusted it to 12).

3. Connect the 14PIN cable and 8PIN chip clip, and install a solder-free bracket. Adjust the angle, and shorten the crystal. Please note that the red line means PIN-I. Clamp the 8-pin chip, and connect the MEM-ICP adapter with the 14PIN cable. Then connect the adapter to Digimaster III.

Operation Select an option based on car and chip model: Instrument system >> Japan&Korea >> Subaru >> Outback >> 2006 >> Confirm chip model is 93C56, click Next >> MEM-ICP You can drop down the help image to guide the connection. As you can see, green indicates that the 8-pin chip and the crystal are well connected. Click "OK". Confirm the current mileage, and click "OK". Save the original file. Enter the new mileage, and click "OK". Write data success.

www.obd2shop.co.uk

[auto-tools]

Yanhua Digimaster 3 + Solderless Adapter User Guide

This is a guide for you to use Yanhua Digimaster 3 + solderless adapter for mileage adjustment. Including installation and operation step by step.

How to install Yanhua D3 & solderless adapter? 1. Connect Digimaster 3 and Yuanhua solderless adapter via a power cable.

Connect the chip and Yuanhua solderless adapter via chip clip or Puncture socket. The red line needs to match Pin1 of the chip.

Select the corresponding chip model through "CHOOSE" on the adapter: My dashboard computer here is a 2009 VW Bora, chip no. 24C32. So I gonna choose 24XXX, then press test, and start pin detection. *If the pin detection fails, please adjust the chip clip and press the test again.

When pass the pin detection, connect the adapter and Digimaster 3

How to use Yanhua D3 for mileage correction? Meter system >> Europe >> Volkswagen >> Bora >> 18G920826 >> 2009 and next Check the original mileage, and press "YES". Save the original data.

Now we can program new mileage. Enter the new mileage value, then choose "OK". Mileage adjustment is successful. Complete.

www.obd2shop.co.uk