Teensy 4.0 With NMEA 2000 Connector And 240 x 240 IPS LCD for Marine Applications
This board carries an Arduino-compatible Teensy 4.0 microprocessor system, a 240x240 pixels IPS LCD, and a Micro C NMEA 2000 connector. The board receives power through the 12 VDC NEMA 2000 connector that feeds an onboard 5 VDC regulator. There is also a 4-way 1mm (Qwiic) IC2 connector for external sensors. The example sketch reads data from an NMEA 2000 wind sensor and a temperature sensor and displays the reading on the LCD.
This board carries an Arduino-compatible Teensy 4.0 microprocessor system, a 240x240 pixels IPS LCD, and a Micro C NMEA 2000 connector.









