#obdstar

[auto-tools]

New Free Upgrade: OBDSAR TCM Cloning for DQ38X/DQ500 GEN2

OBDSTAR has just released a powerful FREE software upgrade for the KeyMaster G3 and DC706, significantly expanding its TCM (Transmission Control Module) cloning capabilities. This update focuses on the high-demand Bosch and ZF GEN2 series, making maintenance and repair even easier for professional workshops.

Key Highlights of the Update: 1. Comprehensive Support for BOSCH GEN2 Users can now perform Data Read/Write, Mileage Calibration, and IMMO Data Decryption (Exclusive) via Bench Mode for the following models:

DQ380 (0DE/0GC) DQ381 (0DE/0GC) DQ500 (0DL) Recommended Wiring Cable: TCM-005

2. Enhanced ZF Support The update also includes Data Read/Write functionality for:

ZF AL552 GEN2 Recommended Wiring Cable: TCM-024

Supported Vehicle Brands: This update covers a wide range of VAG group vehicles and luxury brands, including:

Volkswagen & Audi Skoda & Bentley Lamborghini & Porsche

Technical Specs: Supported Bootloader Version: BH1G0401 Method: Bench Mode (No need to disassemble the unit, ensuring a safer and faster process).

How to Get the Update? This is a FREE upgrade for all active KeyMaster G3 and DC706 users. Simply connect your device to Wi-Fi and run the update manager to download the latest software version.

Upgrade today and stay ahead in the world of advanced TCM programming!

www.obd2shop.co.uk

[auto-tools]

2021 Ducati Diavel 1260 PIN Code Reset Function Procedure

Background PIN Code Overview The DUCATI PIN code is a 4-digit security password designed for immobilizer (IMMO) protection and anti-theft data programming.

Its main functions include: 1. Emergency Unlock If the key transponder fails, the smart key battery is dead, or the immobilizer system malfunctions, the PIN code can be entered via the dashboard to unlock and start the vehicle.

2. Security Protection Factory default PINs (e.g., 0000) are typically generic. Users are strongly advised to change the PIN to a personalized code via the dashboard menu to prevent unauthorized access.

3. System Recovery If the PIN is lost or not properly stored, the vehicle may be unable to start or access certain dashboard functions. In such cases, the PIN Code Reset function must be performed using a diagnostic tool.

Preparation Required tools: MOTOMASTER Diagnostic Tool M001A Adapter M041 Cable

Solution Use OBDSTAR MOTOMASTER to perform the [PIN Code Reset] function and restore the default PIN.

Detailed Procedure Step 1: Enter Diagnosis Menu Select: [MOTO Diag] → [DUCATI] → Latest Version → [Diagnosis]

Step 2: Select Model Choose: [By Model]

Step 3: Select Vehicle Information Follow this path: [D] [Diavel 1260 E5] [1262] [MY 21]

Step 4: Manual Selection Click: [Manual Selection]

Step 5: Enter System Select: [Hands Free (Smart Key)] → [Enter]

Step 6: Access Special Function Click: [Special Function] Enter password: 123 Click [OK]

Step 7: Reset PIN Code Select: [PIN Code Reset]

Step 8–9: Confirm Operation Click [OK] to confirm each prompt.

Step 10: Completion Operation completed successfully. The PIN code has now been reset.

You can now proceed to set a new PIN via the dashboard.

Manual PIN Change Procedure After resetting, follow these steps to set a new PIN: 1. Turn the ignition switch to the ON position. 2. Wait for the dashboard home screen. 3. Press and hold the MENU ENTER button on the left handlebar to access the menu.

4. Select [PIN CODE] 5. Enter the default PIN: 0000 6. Set your new PIN code to complete the process

Summary The PIN code is essential for immobilizer security and emergency access. If the PIN is lost or invalid, use MOTOMASTER to reset it. Always set a personalized PIN after resetting to ensure vehicle security.

Important: Please strictly follow the prompts on your diagnostic device during the operation process to avoid errors.

www.obd2shop.co.uk

[auto-tools]

OBDSTAR Marine Diagnostic Software Upgrade: New BRP Support Added

OBDSTAR has released a significant upgrade to its marine diagnostic software, introducing support for BRP.

BRP Software Functions: 1. Supports IMMO and service functions for all models up to 2025. 2. Supports CDID diagnostics for 2014 and newer models, allowing users to view specific model, year, version, configuration, and other details. 3. Adds the following special functions: Set Engine Serial Number Set Vehicle Total Hours Set VIN Reset Last Maintenance Set Vehicle Model Number Configure Keys Set Customer Name Set Delivery Date Configure iBR (Lock/Unlock Calibration)

Supported Tools: MarineMaster ISCAN SEA-DOO (MARINE) D800 MS80 D700 ISCAN BRP

Software updates may vary depending on product configurations. For more details, please contact: www.obd2shop.co.uk

[auto-tools]

2020 Honda ADV750 Clutch Initialization Using OBDSTAR MotoMaster

In this guide, we will walk you through the clutch initialization (learning) procedure for a 2020 Honda ADV750 using the OBDSTAR MotoMaster diagnostic tool. This function is essential after clutch-related repairs or when transmission performance needs recalibration.

Follow the steps below carefully to complete the process successfully.

Required Tools: OBDSTAR MotoMaster Main cable M041 dedicated cable

Connection Setup 1. Locate the motorcycle diagnostic port. 2. Use the M041 dedicated cable to connect the MotoMaster to the motorcycle. 3. Turn the ignition ON (engine OFF). 4. On the MotoMaster, navigate to: [MOTO Diag] → [HONDA]

Clutch Initialization Procedure 1. Select [Auto Scan] and confirm that the M041 diagnostic connector is in use. 2. Enter [Special Functions]. 3. Choose [Clutch Initialize Learning]. 4. Carefully read the on-screen notes and confirm: The engine is OFF The transmission is in Neutral 5. The tool will display the message: “Is the shift indicator ‘L’ turned on?” Tap [Cancel].

Ignition & Engine Operation 1. Within 10 seconds, turn the ignition OFF, then turn it ON again. 2. Start the engine. 3. Wait until both the “L” indicator and the dashboard symbol disappear. 4. Tap [OK] to continue.

Completion Steps 1. Once the clutch initialization completes successfully, tap [OK]. 2. Follow the on-screen prompt to turn OFF the ignition within 10 seconds, then tap [OK] again. 3. If the tool displays: “The inspection is finished,” the clutch initialization procedure has been completed successfully.

Video Tutorial For a visual walkthrough of the entire process, watch the video guide below:

For more motorcycle diagnostic guides and professional tools, visit: www.obd2shop.co.uk.

[auto-tools]

Mercury Diesel Engine Maintenance Reset Using OBDSTAR MarineMaster

This article demonstrates how to perform a maintenance reset on a Mercury Diesel engine using the OBDSTAR MarineMaster. The procedure is straightforward and can be completed in just a few steps with proper preparation.

Note: Before starting, make sure the MarineMaster device is properly connected to the boat using the dedicated diagnostic cable.

Step-by-Step Maintenance Reset Procedure Step 1: Enter Marine Diagnosis Power on the OBDSTAR MarineMaster and tap [Marine Diag]. Use the search box in the upper-right corner to quickly locate the corresponding engine model.

Follow the menu path below: [MERCURY / DIESEL] → [MERCURY DIESEL V33.01] → [Diagnosis] → [Injection System Integration Module] → [(2018–) Diagnosis on CAN Node (JUNCTION BOX)] → [Outboard – Avator – Tiler – GEN21B_AAQ]

Step 2: Access Maintenance Function Enter the [Special Function] menu Scroll down and select [Maintenance] Tap [OK] to continue

Step 3: Confirm Maintenance Conditions Read the scheduled maintenance description carefully Shift the throttle to the required position as instructed on the screen Confirm again to proceed

Step 4: Check Maintenance Remaining Percentage Select any engine to view its maintenance remaining percentage: 100% – 16%: Normal condition 15% or below: Oil and oil filter replacement required 0%: Maintenance overdue Stop the engine immediately and perform maintenance

In this example, 16% is shown. Tap [Reset] to perform the maintenance reset.

Step 5: Reset Completed When the message "Reset Complete" appears, the maintenance reset has been completed. If the boat has multiple engines, repeat the same steps for the other engine(s).

For a visual walkthrough, watch the video guide here:

Conclusion With the OBDSTAR MarineMaster, resetting the maintenance reminder on a Mercury Diesel engine is quick, accurate, and user-friendly. This tool provides clear on-screen instructions and supports professional marine diagnostics and service tasks.

For more marine diagnostic tools and guides, visit: www.obd2shop.co.uk

[auto-tools]

Mercedes-Benz W221 Dashboard Programming with OBDSTAR X300 Classic G3

In this article, we demonstrate the advanced ECU programming function of the OBDSTAR X300 Classic G3 (Keymaster G3), illustrating how to quickly program a used instrument cluster from a Mercedes-Benz S-Class W221 model. This function allows you to restore a used instrument cluster to factory settings and complete its programming.

Important: Before starting any operation, make sure the main cable is properly connected to the vehicle to avoid communication errors.

Step 1: Enter the Dashboard Programming Menu

1. On the KeyMaster G3 device, navigate through the following path: [ECU Advanced] → [MB BENZ] → [DASHBOARD] → [S-CLASS] → [W221]

Tap [Guide] and carefully read the function introduction and menu descriptions to understand the operation process and precautions.

Next, retrieve [ECU Info.] to confirm the hardware and software part numbers of the dashboard, ensuring compatibility before proceeding.

Step 2: Back Up the EEPROM Data

Before performing any modifications, it is strongly recommended to back up the original data. 1. Select [EEPROM Backup] 2. Tap [Start] to begin backing up the data 3. You can customize the filename of the saved backup file for easier identification later

This backup file is critical and will be used in the following steps, so make sure it is saved correctly.

Step 3: Virginize the Used Dashboard

Now, execute the [Virgin Dashboard] function. 1. Carefully select the correct backup file 2. Double-check the file before confirming 3. Tap [OK] to proceed

Once completed, the used dashboard will be restored to factory (virgin) status: 1. The mileage will be initialized to its initial display state 2. The SSID synchronization code will be cleared

Step 4: Program the Dashboard

After virginizing the dashboard, proceed with the dashboard programming function.

When the device displays [Programming complete], it means the used Mercedes-Benz W221 dashboard has been successfully programmed and is ready for use.

For a full step-by-step visual demonstration, please watch the video guide:

Visit our website for more professional automotive diagnostic tools and tutorials: www.obd2shop.co.uk

[auto-tools]

HONDA 38770-MFJ-A02 ECM Data Read & Write via MOTOMASTER

In this post, we’ll demonstrate how to perform ECM data read and write operations on the HONDA 38770-MFJ-A02 ECM using OBDSTAR MOTOMASTER. This procedure is suitable for technicians who need to back up, clone, or restore ECU data safely and efficiently.

Required Tools: MOTOMASTER (or KEYMASTER G3) High-power DC regulated power supply Main cable ECU clone jumper MP001 programmer HONDA 38770-MFJ-A02 ECM

Software Preparation Before proceeding, ensure that the device's software is up to date with the latest version. 1. Tap [ECU Flasher] >> [ECM] 2. Use the search box in the top-right corner to quickly locate the corresponding ECM model 3. Enter the [Guide] section and carefully review: Warm reminders Menu descriptions Operation steps Connection methods Special notes This step ensures correct operation and helps avoid unnecessary risks.

Pinout and Connection Setup 1. Tap [Pinout] 2. Select [BENCH] mode 3. Verify that the ECM appearance matches the displayed module 4. Tap [Connector Pinout] and connect all wires strictly according to the pinout diagram Correct wiring is critical for stable communication and successful data operations.

ECM Data Reading (Backup) 1. After completing all connections, tap [Start] 2. Establish the ECU connection 3. Perform a data backup first (strongly recommended) 4. Customize the file name as needed 5. The file storage location will be displayed on the left side of the screen Backing up original data ensures data safety and allows recovery if needed.

ECM Data Writing 1. Select the previously backed-up data file 2. Write the data into the ECM module 3. The file management system supports filtering by: File name Modification time File size 4. Once writing is completed, the operation is finished successfully

Video Reference: For a complete step-by-step demonstration, please watch the video below:

For more professional automotive diagnostic tools and programming solutions, visit www.obd2shop.co.uk.

[auto-tools]

OBDSTAR New Arrival: CAN DIRECT-V2 Introducing

The OBDSTAR CAN DIRECT-V2 is a powerful tool designed to bypass gateway modules found in many modern vehicles, providing direct access to the CAN bus when standard OBD diagnostic ports are blocked. This direct connection allows technicians to perform proximity key programming, cluster calibration, CAN frame acquisition, and various automotive repair functions with ease. The device is also fully compatible with third-party diagnostic tools, making it an essential addition for automotive locksmiths and workshops.

Included Components: 1. CAN DIRECT-V2 Main Cable 2. Spiral Wire Piercing Probe (Hook Probe/ Back-Probe Pin) 3. JEEP/CHRYSLER Dedicated CAN-C Bus Connector

IMMO: TOYOTA/LEXUS (proximity key programming) Support below (4A) models: 2019- TOYOTA COROLLA 2021- TOYOTA COROLLA CROSS 2021- TOYOTA COROLLA SPORT 2021- TOYOTA COROLLA SPORT HV 2021- TOYOTA COROLLA TOURING 2021- TOYOTA COROLLA TOURING HV 2021- TOYOTA COROLLA HV 2019- TOYOTA LEVIN 2021- TOYOTA LEVIN HV 2021- TOYOTA ALLION 2021- TOYOTA LEVIN

Support below (8A) model: 2021- TOYOTA Yaris Cross

Support below (8A-A8) models: 2018- TOYOTA PRADO 2018- TOYOTA LAND CRUISER 2018- TOYOTA CROWN 2018- TOYOTA HIGHLANDER

Support below (8A-A9) models: 2018- TOYOTA CAMRY 2018- TOYOTA C-HR 2018- TOYOTA IZOA 2018- TOYOTA PRIUS 2018- TOYOTA VELLFIRE 2018- TOYOTA ALPHARO 2018- LEXUS RX450H 2018- LEXUS LC

Support below (8A-AA) models: 2018- TOYOTA HIGHLANDER HV 2018- TOYOTA RAV4 2018- TOYOTA RAV4 HV 2018- TOYOTA AVALON 2018- TOYOTA CROWN KLUGER HV 2018- LEXUS ES 2018- LEXUS UX 2018- LEXUS RX 2018- LEXUS LS

Support model below: 2021- TOYOTA COROLLA CROSS HV

RENAULT 2020- RENAULT Clio 5 2020- RENAULT Captur 2020- RENAULT Arkana 2020- RENAULT Kangoo 2020 RENAULT Espace 2021- RENAULT Scenic 2020- RENAULT Zoe 2022- RENAULT Traffic 2021- RENAULT MEGANE 4 PH2

PSA 2023- PEUGEOT 308 Prox (For UDS+ systems) 2023- PEUGEOT 208 Prox (For UDS+ systems)

OPEL 2022- OPEL Astra L (For UDS+ systems)

FCA 2018- DODGE Charger 2019- DODGE Ram 2018- DODGE Challenger 2018- DODGE Durango 2018- DODGE Journey 2018- JEEP Renegade Prox 2019- JEEP Renegade 2019- JEEP Compass Blade 2018- JEEP Compass Prox 2018- JEEP CHEROKEE 2018- JEEP GRAND CHEROKEE 2018- JEEP WRANGLER 2018- JEEP RENEGADE 2017- CHRYSLER Pacifica Prox 2015- CHRYSLER 300/300C 2018- MASERATI models, including GHIBLI, LEVANTE, and QUATTROPORTE, etc. 2018- FIAT models, including 500, 500C, and 500X, etc. 2018- Alfa Romeo models, including GIULIA, STELVIO, and TONALE, etc.

Cluster Calibration Function: Support below TOYOTA/LEXUS dashboard types: 2019- LEXUS ES S6J3001 DENSO 2023- LEXUS GX550 R7F701401 DENSO 2023- LEXUS LM350H R7F701401 DENSO 2019- LEXUS LS S6J3001 DENSO 2023- LEXUS LS500 R7F701401 DENSO 2022- LEXUS LX600 S6J3001 DENSO 2023- LEXUS NX R7F701441 DENSO 2023- LEXUS NX350 R7F701401 DENSO 2023- LEXUS RX R7F701441 DENSO 2023- LEXUS RX350 R7F701401 DENSO 2023- LEXUS RX450H R7F701401 DENSO 2023- LEXUS RX500H R7F701401 DENSO 2018- LEXUS UX S6J3001 DENSO 2019-TOYOTA 4RUNNER S6J3001 DENSO 2019-TOYOTA ALLION S6J3001 DENSO 2023-TOYOTA ALPHARD R7F701401 DENSO 2018-TOYOTA AVALON S6J3001 DENSO 2024-TOYOTA AVANZA R7F701442 2023-TOYOTA AVANZA VELOZ Q S6J3001 DENSO 2023-TOYOTA BX4 R7F701441 DENSO 2023-TOYOTA BZ4 R7F701441 DENSO 2023-TOYOTA BZ4X R7F701401 DENSO 2023-TOYOTA BZ4X R7F701441 DENSO 2024-TOYOTA CAMRY R7F701401 DENSO(80) 2018-TOYOTA CAMRY S6J3001 DENSO 2018-TOYOTA CH-R S6J3001 DENSO 2024-TOYOTA COROLLA R7F701442 2023-TOYOTA COROLLA R7F701401 DENSO 2018-TOYOTA COROLLA S6J3001 DENSO TOYOTA COROLLA R7F701441 DENSO 2023-TOYOTA COROLLA CROSS R7F701401 DENSO 2021-TOYOTA COROLLA CROSS S6J3001 DENSO 2024-TOYOTA CROWN R7F701401 DENSO 2018-TOYOTA CROWN KLUGER S6J3001 DENSO TOYOTA FRONTLANDER R7F701441 DENSO 2019-TOYOTA GRANACE S6J3001 DENSO TOYOTA GRANVIA S6J3001 DENSO 2020-TOYOTA HARRIER R7F701401 DENSO 2016-TOYOTA HARRIER S6J3001 DENSO 2019-TOYOTA HIACE S6J3001 DENSO 2023-TOYOTA HIGHLANDER R7F701401 DENSO(70) 2018-TOYOTA HIGHLANDER S6J3001 DENSO 2018-TOYOTA KLUGER S6J3001 DENSO 2024-TOYOTA LEVIN R7F701401 DENSO 2019-TOYOTA LEVIN S6J3001 DENSO TOYOTA LEVIN R7F701441 DENSO 2019-TOYOTA LINSHANG S6J3001 DENSO 2023 TOYOTA RAIZE S6J3001 DENSO 2023-TOYOTA RAV4 R7F701401 DENSO 2019-TOYOTA RAV4 S6J3001 DENSO 2022 TOYOTA SIENNA R7F701401 FULL TFT 2019-TOYOTA SIENNA S6J3001 DENSO 2018-TOYOTA TACOMA S6J3001 DENSO 2023-TOYOTA TACOMA IV R7F701401 DENSO 2022-TOYOTA TUNDRA R7F701401 DENSO 2023-TOYOTA VELLFIRE III R7F701401 DENSO 2023 TOYOTA VENZA R7F701401 DENSO 2019-TOYOTA VENZA S6J3001 DENSO 2023-TOYOTA VIOS S6J3001 DENSO 2020-TOYOTA WILDLANDER R7F701401 DENSO 2019-TOYOTA WILDLANDER S6J3001 DENSO 2024-TOYOTA YARIS R7F701442 2020-TOYOTA YARIS R7F701441 DENSO 2019-TOYOTA YARIS CROSS S6J3001 DENSO 2019-TOYOTA YARIS IV S6J3001 DENSO

www.obd2shop.co.uk