API 610 Requirement on Pump Performance Curve
Pump Performance Curveに関するAPI 610上の要求は以下
6.1.4 Pumps shall be capable of at least a 5 % head increase at rated conditions by replacement of the impeller(s) with one(s) of larger diameter or different hydraulic design, variable-speed capability or use of a blank stage.
Process Conditionが変化した際に、既存のCasingを使用したまま、Impellerを変更して対応するための要求。
6.1.11 Pumps that have stable head flowrate curves (continuous head rise to shutoff) are preferred for all applications and are required if parallel operation is specified. If parallel operation is specified, the head rise from rated point to shutoff shall be at least 10 %. If a discharge orifice is used as a means of providing a continuous rise to shutoff, this use shall be stated in the proposal.
Pump周りにはFlowmeterが存在しない場合が多い。そのような場合、流量は吐出圧からPump Curveを用いて判断する。Curveがフラットな場合、吐出圧から流量が判断し辛いため、このような要求がある。特にParallel Operationの場合は、2台分のCurveはさらにフラットになるため、Ratedから締め切り圧まで10%の上昇を要求している。
PJによっては、Single Operation時のCurveにも何%かのHead Increaseが要求されることもある。
6.1.12 Pumps shall have a preferred operating region of 70 % to 120 % of best efficiency flowrate of the pump as furnished. Rated flow shall be within the region of 80 % to 110 % of best efficiency flowrate of the pump as furnished.
なるべく効率の良い運転点で運転するための要求。
PJによっては、さらに運転点をBEPに近づける様要求されることもある。











