#romoss ph80

[murumokirby360]

🔋 My Romoss Sense 6 (PH80) battery bloated ⚡ [Sept. 24th, 2020]

Hi, you may wondering that I’m doing another topic of my current power bank or rather power banks; Romoss Sense 6 and Sense 6+ Pro, right? Well yes, but... I have a problem...A one power bank problem...😟

So what’s the problem? We have to find out, so let’s get through it:

1st to 3rd Image(s): •[1st Image] At first glance, in this front position, my Romoss Sense 6 (PH80) power bank was in-good condition, but...

•[2nd & 3rd Images] When we look at different angles, it seems that my Sense 6 power bank was bloated on both front and rear. (Like a anthropomorphic character changes from slim to chubby fat by eating junk foods. But unlike a anthropomorphic character tries to be slim by hard work sweaty exercise and eating balance foods, the power bank never return to it’s shape. 😟)

4th and 5th Image(s): • [4th Image] Here you see the next image was a open gap on the lower part of Sense 6 (PH80) power bank, this was the result of bloated battery inside. • [5th Image] Lying down of  my Sense 6 (PH80) power bank you see a white plastic part rises like a new form of land mountain 🗻 (just for a reference). I know, it used to be a very flat 🫓...

6th and 7th Image(s): • [6th Image] A little comparison to my un-bloated Romoss Sense 6+ Pro (PH80 Pro) power bank (on the right) to my bloated Romoss Sense 6 (PH80) power bank. •[7th Image] Now I’m trying to re-create from my first part topic back in February of 2019, by sandwiching between two of my Romoss power banks. And here you see my Sense 6 (PH80) on the right did not flat well despite the battery was bloated, unlike my Sense 6+ Pro one on the left. It’s no wonder that my Sense 6+ Pro (PH80 Pro) remains intact, so I’m glad. Nevertheless, take a look of my photo from my original first part of Romoss power banks right here as a comparison.↓

So, what happened to my Sense 6 power bank and how? • Well yesterday at around 11 PM before ( it struck time to 12 Midnight), I was watching youtube while I’m charging my phone (Honor 8C) using my Sense 6+ Pro (PH80) power bank ⚡📲. When my phone almost fully charge I realize that my Sense 6+ Pro will be almost rang out of juice 🔋⬇️ before I gave it a rest to cool my Sense 6+ pro down for many days. So now I’m reaching my second one, which is my Sense 6 (PH80) for charging it after a long rest. Suddenly, when I plugged in my Sense 6 power bank through my Anker Powerport 2 USB charger via my Anker Powerline micro USB cable, this happen... My Sense 6 (PH80)’s internal batteries started to bloating up😧, not just that but the plastic itself too, so I have to unplug it from my Anker charger immediately. Although my Sense 6 power bank functions well by connecting micro USB cable to my mom’s smartphone as a test out, my emotion was pressure & afraid 😯when I’m using bloated power bank too much before it will burst up fire of chemicals very soon... So I have to refuse from using Sense 6 power bank for now on, with only one power bank which is the Sense 6+ Pro (PH80) that I could rely on. • As of today, both of my power banks are now half (1½ ) a year since 🎄December of 2018🌟 as a 🎁Christmas gifts🎁 from my two male siblings, and I’m very surprised that my Sense 6+ Pro (PH80) still intact after a long rest and charge without bloating the internal batteries, all thanks to multiple layers of protection chip and genuine specs 🙂. On the Sense 6 (PH80) however, not so much 😟... So now I’m not gonna use it and store it in a safe place, until I’ll buy / order a new power bank either a fresh one of the same brand and model or any power bank brand that has a same specs and protection as my Romoss Sense 6+ Pro (PH80)... Or maybe far more better specs and protection than my Sense 6+ Pro (PH80) so who knows 🤔...

Anyways, for those who read my entire explanation - thank you for listening 😊. And that’s all for now. If you want to see my related Romoss power banks topics from my previous years, then I’ll provide some links down below.↓😉

Previous: • My Romoss Powerbank and Honor 8C charging test: Part 1, Part 2, Part 3 (Final) • My Romoss Power Bank: Part 1, Part 2, Part 3

As well as my BUBM case pouch review, so please check out that too. ↓😉 My BUBM Case Powerbank Pouch Case: • Part 1 (first half) [Jun 14, 2020] • Part 1 (second half) [Jun 14, 2020]

Tagged: @ftgxsee, @lordromulus90, @bryan360, @carmenramcat, @bytern​, @gibsonfreak49

[murumokirby360]

My Romoss Powerbank and Honor 8C charging test (w/ my Paper Dolls) - Part 2 [Jun 15, 2020]

Here’s my part 2 of my charging test with my Romoss powerbanks and my Honor 8C.🔋⚡📱🙂

In this part of topic, I’m now using my Romoss Sense 6 (PH80) power bank in fully charged (unlike my Sense6+ Pro / PH80 Pro) and see how it performs. 😊

BTW: I set up my Galaxy S4′s (GT-i9505) rear camera to 13MP in a different resolution. 🙂📱

So without further ado, let’s get started:

1st & 2nd Image(s): • Much like my previous part, here are the three techs that I’m doing it right now. 🙂

3rd & 4th Image(s): • My Honor 8C phone starts charging at 4:18 AM, as you can see my phone’s battery has only 6% remaining when I already plugged in. 🔋⚡📱

5th &b 6th Image(s): • A minutes later, I have now 3 lights remaining on my Romoss Sense 6 power bank - meaning that I only have less than 90%. Unlike my Sense 6+ Pro which has longer drain to charge from any devices, my Sense 6 drains quickly just a bit in just 5 to 10 minutes or so. That’s a big difference between my two current Romoss power bank models. Also my paper dolls notice that their heights between my Honor 8C and Romoss Sense 8C are bit slightly difference unlike Sense 6+ Pro which is taller than the Sense 6, and I could agree more.☺️ • (6th Image) At 4:30 AM my Honor 8C’s battery has now 19% in charging process. 🔋⚡📱

7th Image: • Why my Sense 6 (PH80) power bank drains quickly in less than 10 minutes, well is it because I used the USB 2.0 socket, which indicates two electric symbols (⚡⚡) as you see here. Uh yeah and it charge quite fast than the normal USB 1.0 socket (which indicates one electric symbol (⚡)). Well it seems no issue/problem about draining my Sense 6 fast, this is just normal. 🙂

8th & 9th Image(s): • At 6:47 AM, my Honor 8C phone finally fully charged. And take a look at the indicated lights (on the left), it still three lights remaining on my Romoss Sense 6 which is not bad at all, even though it quickly drain by less than 90% in less than 10 minutes, but still (not bad). My paper dolls agrees the results. 👍🙂

Well, that’s all for now. And in the next final part, I’ll go try again by charging my Sense 6+ Pro (PH80 Pro) in full 100% and charge it to my Honor 8C to see the true performs and results unlike the previous ‘Part 1′. 🙂

And in case you want to see my related Honor 8C and Romoss Powerbanks then please check out my previous down below: ↓ 😉

Previous: My Romoss Powerbank and Honor 8C charging test: Part 1 My Romoss Power Banks: Part 1 , Part 2, Part 3 Honor 8C set up a fingerprint scan security: [CLICK ME!] Honor 8C Topic : Part 1 , Part 2, Part 3, Part 4, Part 5, Part 6, Part 7, Part 8 My video of Honor 8C opening power button: [CLICK ME!]

As well as my BUBM case pouch review, so please check out that too. ↓😉 My BUBM Case Powerbank Pouch Case: • Part 1 (first half) [Jun 14, 2020] • Part 1 (second half) [Jun 14, 2020]

Tagged: @bytern, @ftgxsee, @project-bluebell, @gibsonfreak49

[murumokirby360]

My Xiaomi Mi Led Light Enhanced Version second try w/ my Romoss Sense 6 (PH80) - Part 4

Here’s another part of my Xiaomi Mi Led Light Enhanced Version, once again with my current Romoss Sense 6 [PH80] Power Bank.

Nothing much to say, just showing up with different rotation (mmm well not exactly) w/ lit the led light above. Also, Chowder and Panini are here to see the actual bright. 😊💡

Well that’s all I could say now, please stay tuned for another part.😊

And in cased you missed my opening parcel then please CLICK ME.

Also, check out my previous as well.↓

Previous: •My Xiaomi Mi Led Light Enhanced Version second try w/ my Romoss Sense 6 (PH80) - Part 3 •My Xiaomi Mi Led Light Enhanced Version first try w/ my Romoss Sense 6+ Pro (PH80 Pro) - Part 2 •My Xiaomi Mi LED Light Enhanced Version w/ my Paper Dolls - Part 1

My 1st Xiaomi item: • My Xiaomi [deviantART] • My Xiaomi Mi 16000mAh Power Bank

My Romoss Power Banks: Part 1 , Part 2, Part 3

[murumokirby360]

My two Romoss Powerbanks [PH80 Pro and PH80] -  Part 1

I’ve been using my two Romoss Power Banks for about 3 months and days since last year - Dec. 24th,2018 (Christmas Eve). And it seems pretty well impressed of my power banks.😊 I’ve been charging in my phones using my power bank(s) everyday and charging in after used until fully charged. So, look at the comparisons between the Sense 6+ Pro / PH80 Pro on the left and the “normal” Sense 6 / PH80 on the right - the Sense 6+ Pro is bit taller than the next one but with the same amount of 🔋 20000 mAh battery capacity 🔋.

• Also the two power buttons (as you see on the 3rd image) was completely different; The left one was teal color while the right one was a normal gray color matched.

•On the next 4th and 5th images are the back - in vertical mode and horizontal. The right one [Sense 6 / PH80] has a QR Code which I tried thrice using my smartphone - it opens a Romoss WeChat account but although it sends me to Google Play for installing a WeChat app as a requirement, but nah I guess I don’t need for that.

•And finally on the 6th image at the bottom, here you can see that the Romoss Sense 6+ Pro has more input and output ports than the Sense 6 which is two USB output ports and one micro b usb port as input charge. If you want to know more about the Romoss Sense 6+ Pro’s ports then please - CLICK ME!

Well, that’s it for now… Stay tuned for even more in “Part 2″. 😉

[murumokirby360]

My two Romoss Powerbanks [PH80 Pro and PH80] w/ Anker Powerport 2 and Powerlines - Part 3

Hi, I’m back for a PART 3 of reviewing my two Romoss Power Banks - Sense 6+ pro on the left and Sense 6 on the right. Now like I said before, I saved this part by draining out completely of both power banks into zero percent or in translates to four light indicators - a one light blinking. And since that, I’m gonna used my (2 year old) Anker Powerport 2 charger and 2 anker Powerline micro usb cables to see who’s fully charged first. So when I plugged in my powerport 2 charger w/ powerline cables on the electric socket to my two power banks It began by blinking on both sides and I started time on 12:35am.

Now after 12 hours, both of my power banks are now completely fully charged at around 12:54pm when I woke up. Not sure which of my power banks came first but nah, I missed it.

Nevertheless, both of them are good to say. Still finding my old CDR-King power banks though...

To see my Anker Powerport 2 and also my former unused Anker Powerline nylon cable, then please click these: •My Anker Powerport 2 USB Charger •My Anker Powerline+ Micro USB Cable

And also my currently Anker Powerline micro USB cables. Click these: Part 1, Part 2

Stay tuned for even more in “Part 4″. 😉

Previous: Part 1 , Part 2