What Web-based Management Features Does S3700 V100R007 Support?
What Web-based Management Features Does S1700 V100R007 Support?
Among all S1700 models of V100R007C00, only the S1700-28FR-2T2P-AC, S1700-28GFR-4P-AC, S1700-52FR-2T2P-AC, and S1700-52GFR-4P-AC support web management.
S1700 V100R007 is available in web-managed and web-unmanaged models. Table 1 lists the web-based management features supported by S1700 web-managed switches in V100R007.
Web-based management features supported by S3700 web-managed switches in V100R007
Displays a switch's front panel, device information, and running status.
Restores the factory settings.
Restarts a switch with the specified software version and configuration file.
Upgrades a switch's firmware version using HTTP or FTP.
Uploads, downloads, or deletes files in a switch's flash memory.
Sets the system name and connection timeout period for a switch.
SNTP Server Configuration: sets SNTP server parameters.
Time Configuration: manually sets the system time.
Views and configures the management VLAN and management IPv4/IPv6 address for a switch.
Configures static IPv6 neighbor relationships, views dynamic neighbor relationships, and views/configures route advertisement information.
Basic Attributes: displays connection status of each Ethernet interface, and configures basic attributes of one or more Ethernet interfaces.
Statistics on Interface: displays traffic statistics on each Ethernet interface.
Priority: configures the system priority.
Load Balancing Mode: specifies the mode in which traffic is load balanced.
Trunk: views and configures a trunk.
Trunk Member: views information about trunk member interfaces.
Creates, deletes and edits VLANs, displays member interfaces by VLAN, and edits member interfaces by interface/interface range.
Creates and deletes MAC VLANs, displays MAC VLAN lists by VLAN/MAC address, and enables/disables MAC VLAN by interface/interface range.
MAC Address List: views or deletes dynamic MAC address entries.
MAC Aging Time: sets the aging time of dynamic MAC address entries.
Static MAC Address: creates or deletes static MAC address entries.
Blackhole MAC Address: creates or deletes blackhole MAC address entries.
MAC Address Filter: enables or disables MAC address filtering on a specified interface.
Flapping MAC Address: displays information about MAC address flapping.
Configures STP parameters in the system and on specified interfaces.
Configures global IGMP snooping parameters, VLAN-based IGMP snooping parameters, router interface learning, multicast group policies, static groups, multicast groups, queriers, router interfaces, and views the multicast forwarding table.
Specifies the period in which an ACL rule is effective.
Applies an ACL rule to a specified interface or VLAN.
Applies an ACL rule to HTTP packets received by a switch.
Configures the trust mode and default CoS value for a specified interface.
Maps CoS values to service levels.
Maps DSCP values to service levels.
Maps IP precedence values to service levels.
Maps service levels to queues.
Configures the QoS scheduling algorithm and weight for WRR scheduling.
Configures Simple Random Early Detection (SRED).
Creates traffic classifiers to control traffic.
Sets the maximum rate of outgoing traffic on an interface.
Adds and views static IPv4 routes.
Adds and views static IPv6 routes.
Configures user accounts.
Configures 802.1x authentication.
Configures storm suppression.
Controls access on specified interfaces.
Configures MAC address authentication.
Configures attack defense functions.
Configures DHCP snooping.
Configures IP source guard.
Configures dynamic ARP inspection (DAI).
Configures defense against packets with forged MAC addresses and MAC address spoofing attacks.
Configures port isolation.
Configures authentication and accounting functions.
Configures RADIUS server parameters.
Configures SSL parameters.
Configures SNMP parameters.
Configures RMON parameters.
Configures LLDP parameters.
Configures LLDP-MED parameters.
Views device hardware information. Huawei checks every device before delivery to ensure that the device is running the correct version and functioning properly.
Interface Loopback Test: performs loopback diagnosis on specified interfaces.
VCT Cable Diagnostics: performs VCT diagnosis on specified interfaces to locate cable faults.
Views parameters on optical interfaces.
Enables or disables the power-saving mode and EEE function.
Specifies the source and destination interfaces of mirrored packets and displays mirroring configuration.
Ping Test: performs ping tests to check network connectivity.
Tracert: performs tracert tests to collect routing information.
One Key Information: clicks the button to download all configurations, logs, and error information.
Saves modified parameter settings.