#spalls

[stimlanders-collection]

Blastermind stimboard!

🌀-🌀-🌀|🌀-🌀-🌀|🌀-🌀-🌀

[foxiapp]

Timothy Spall's 'superbly suspenseful' ITV drama is leaving Netflix after trending streaming success

Source link

[davidhop]

#Sandstone #spalls beautifully in #Lancaster (at Lancaster, Lancashire) https://www.instagram.com/p/BoE3293l0yE/?utm_source=ig_tumblr_share&igshid=1wbsruddxvzn5

[roadware]

See actual bridge deck repairs in PA on Google Maps.

See actual bridge deck repairs on Google Maps. Google has spent the last few years mapping and photographing roads all over the world. If you know where to look, you can see actual concrete repairs with Roadware 10 Minute Concrete Mender™ The Google Map photo below shows actual bridge deck repairs with Roadware 10 Minute Concrete Mender™ on Interstate 279 in Pittsburgh, PA.  See all the lighter colored spots? Each one is a hole or spall filled with Roadware 10 Minute Concrete Mender™. The repairs here are over three years old. Thank you Roadware distributor, Express Polymers, Inc., in the Pittsburgh area for sending this project in.

View Larger Map

[roadware]

World of Concrete 2011 is January 17-21 in Las Vegas

Roadware will be exhibiting in the World of Concrete 2011.  This will be our 11th year at the show. Our booth will be in the South Hall S11847 at the Las Vegas Convention Center. For free exhibits only registration, use source code A20 when filling out the online registration form. This code is courtesy  of the American Society of Concrete Contractors. Click here to register for the World of Concrete.

DIY Network filming a segment in the Roadware booth at the World of Concrete 2009.

[roadware]

Polishing un-polishable Concrete

Polishing and honing concrete to smooth shiny surface is a great way to give an old warehouse floor new life. Sometimes, warehouse floors are too damaged and worn to make polishing practical. Floors that are full of cracks and spalls will require a large amount of grinding and polishing to achieve an acceptable surface. Roadware 10 Minute Concrete Mender™ may be used to restore the concrete surface and reduce the time and expense of heavy grinding. The Microdweling™ action of Roadware 10 Minute Concrete Mender™ can penetrate the surface of the cracks and spalls, fill in all the low spots, and make the floor ready for polishing.   Click on photos for a larger image.

Pitted, spalled and cracked surfaces may be unpractical to polish.

The first step is a light surface grinding to open up the cracks and remove any loose materials.

An initial grinding with metal resin pads reveals cracks and spalls.

Roadware 10 Minute Concrete Mender™ and fine silica sand mixed in bulk is troweled into the surface over the entire area and allowed to set.

Workers trowel Concrete Mender into place.

In about 10 - 30 minutes, the surface is polished using standard techniques. Roadware 10 Minute Concrete Mender™ will not gum-up polishing pads or smear into the surrounding concrete.

Surface polish using standard techniques.

After grinding, all pitting, cracks and spalls are filled and a smooth surface is quickly restored.

Concrete Mender repairs hold up perfectly during the polishing process.

After polishing, hardening and sealing, a beautiful polished floor is revealed.

Concrete Mender restored floor after polishing, hardening, and sealing.

Click here to learn more about polishing with Roadware 10 Minute Concrete Mender™ Special thank you to International Roadware Distributor Join K&C in Seoul, Korea for submitting this project.

[roadware]

Concrete repair under decorative coatings.

The advances in decorative concrete coating and finishes for patios, sidewalks, driveways and pool decks are amazing. All of these systems have one common element. They are all affected by the condition of the concrete underneath. We recommend and use Roadware MatchCrete™ Concrete Mender (MCM) to repair cracks, spalls and surface defects prior to decorative concrete treatments and coatings.  MCM is just like the Roadware 10 Minute Concrete Mender™ except it cures to a neutral off-white color that has less chance of affecting the color of the decorative coatings applied over the repairs.  Take a look at the project below.

Here is a church with a spalled and rough looking entrance.

Prior repair materials were removed revealing worn, but sound concrete.

Roadware MatchCrete™ Concrete Mender and sand mixed in bulk is applied and troweled smooth. The material appears brown due to the brown colored manufactured sand added to the mix.

Cracks are cleaned and repaired with cartridge applied Roadware MatchCrete™ Concrete Mender and sand.

After about 15 - 30 minutes, the repairs are ground smooth and flat. The concrete is now ready to accept most types of decorative concrete treatments.

Roadware MatchCrete™ Concrete Mender is compatible with most high-build overlay or coating systems. It is also recommended by several top coating system manufacturers.

[roadware]

Roadware compared to look-a-likes.

Recently a customer send me several cut sheets from other manufactures of look-a-like concrete repair products and asked me to compare them with Roadware 10 Minute Concrete Mender™.  Here is how it played out.

Dear Dave,

We here at Roadware are familiar with the knock-off and look-alike products you submitted for our review. These products fall into the category of a low viscosity polyurea. Basically, what they have done is modify a standard polyurea joint filler and added a solvent to make it appear as a high-penetration Concrete Mender™-like product. They are all missing the key property and process that makes Roadware 10 Minute Concrete Mender™ unique and superior in overall performance. This process is called Microdoweling™.

Roadware’s Microdoweling™ process uses a proprietary formula of polyurethanes and additives to achieve a measured surface tension of 0.026 N/m. (1/3 of water) Surface tension is a measurement of a liquids ability to break free of its own molecular friction and flow into something else. Microdoweling™ is why Roadware 10 Minute Concrete Mender™ can penetrate easily into a concrete surface under adverse conditions, as is the case in distressed, broken and cracked concrete.

Other advantages for Roadware 10 Minute Concrete Mender™ are:

The lowest viscosity for easier mixing and blending.

Easy, one-step polishing and grinding. This material will not melt, smear, or gum up diamond polishing pads. An excellent parging compound.

Experienced and advanced packaging. Roadware cartridge packaging is reliable and works well in the field.

End-user color blending. New MatchCrete™ Concrete Mender can easily be manipulated into many colors by modifying the sand or adding pigments.

A modulus of elasticity that is slightly less then the concrete so repairs will move with the concrete and not against it.

Needle tip application. A complete system of needle-tip cartridge mixers for pin-point application and hairline crack repair.

It’s all in the data. Roadware backs up the Microdoweling™ process with independent testing data and publishes it on our website, www.roadware.us.

Thank you for continued support and please call us any time if you have any questions.

Best regards,

Kelton Glewwe

Vice President of Operations