My TP-Link Router Not Working
If the users are facing issues related to tplinkwifi.net router, even after the proper settlement of the router, then firstly you need not be panic. Read out the article and automatically it will provide one of the best solutions to resolve the issues arises even after the installation of the TP-link router.
The article has stated the 5 important methods to fix the tplinkwifi.net not working issues
Solution 1: Establish a physical connection
The first and foremost task which you need to perform is to check whether the existing modem, as well as existing TP-link router, are properly connected or not.
In a situation, if you receive a red coloured error message “WAN port is unplugged” displayed on tplinkwifi.net set up page, states that the modem is not connected to the WAN port.
Now, place a modem wire in the existing WAN port and look whether you are receiving an error message or not. If the error message gets removed, it means your issue is resolved. If not, it means there is any another issue.
Solution 2: Clone the MAC address of the computer device
Most of the internet service providers register the MAC address of their computer system when they are trying to establish a network connection for the first time.
Note:- If the user adds the tplinkwifi.net router to share the internet connection, in that case, ISP (internet service providers) are not going to accept it as MAC address changed.
To clone the MAC address of your computer system, you are prompted to use the following steps:-
Make sure your computer is properly linked to the TP-link router. Proceed to the management setting >> network option and further, select the MAC clone option present at the left side.
To fix the tplinkwifi.net issue, select the clone MAC address of the computer. This option allows users to clone the MAC address of the computer device and will help to make the TP-link router's WAN MAC address.
Solution 3: Reset the IP address
In most of the scenarios, the TP-link router contains the default internet protocol address i.e. 192.168.0.1 and 192.168.1.1. Besides that, it becomes a major conflict to interact with the present range of the TP-link router's device.
Sometimes, it may lead to internet connectivity issues. To deal with an issue, the user needs to change the local area network IP address.
To change the IP address, go to the Network option and move to the LAN port displayed on the left side.
If you are able to get success to reset the local IP address, then it’s great. Otherwise, go through the next solution.
Solution 4: Power cycle the router and modem
The last method to deal with tplinkwifi.net not working issue is to power cycle your router and the modem.
Use the following highlights to fix the error:-
Power off your TP-link router as well as an existing modem. Keep it tuned off for about 1-2 minute.
After reaching the time limit, turn on your TP-link router.
Wait for a while, also turn on your modem. After a few minutes, check whether the internet light is flashing or not.
Moreover, also wait for at least 2 minutes in order to check whether the internet connection is properly established or not.
The above points will definitely help you to find the best solution to deal with the problem.
