Turkey Machinery

[turkeymachinery-blog]

The 12th Internatıonal Forestry And Woodworking Machinery Fair

WoodMac China is the leading specialised fair in China for producers and providers to the wood industry. Built in Shanghai it is the reputable event for international and Chinese producers to display case their technology and equipment to an increasingly worldwide audience.

In 2011 visitors to the 4-day exhibition amounted 16,730 representing a 22% growth on the past version with the fair recording a 20% growth to 35,000sqm. Fair Date : 6- 8 March 2013

http://machinery.furkey.com/en-US/events/2676-the-12th-international-forestry-and-woodworking-ma.html

[turkeymachinery-blog]

Decline In Wood Processing Machinery Orders In Italy

The internal italian market is "stagnant", the foreign markets are more active. The questionnaire about the third quarter 2012 once repeat approve the situation that's been characterising the wood processing technology industry for a long time. Italy is in the situation we all know: stagnating spending, financial force, a manufacturing system controlled by small and medium businesses, insufficient support to investments and newness works are unavoidably having a negative affect and retarding even the smallest luck of recovery. The index of internal orders is at 32, an all-time low since 2002.

 Across the edge, some markets are alive, others less receptive, with alternative trends: a few emerging states are registering important shrinkage this year, while less active states are display signs of developing need.

 The figures: the trend questionnaire by Acimall’s Studies Office shows that the Italian wood processing machinery and instruments manufacture felled by 3.7 percent in Q3 2012 compared to the same period of last year. Orders from abroad went up by 3.1 percent, not sufficient to compensate for 25.2 percent decrease on the internal market.

 The orders book spans two months almost, with costs up by 1 percent since the starting of the year.

 According to the quality questionnaire, 16 percent of the example showed a positive production trend, 48 percent steady and 36 percent falling. Employment is fixed according to 68 percent of the interviewees, falling according to 24 percent and growing according to 8 percent. Inventories are steady according to 44 percent, falling for 40 percent and increasing for 16 percent.

Looking at the estimate questionnaire to have an idea of what might happen in the short term, it is clear that we will have to wait at least until 2013 for Italian market recovery; more optimism for foreign markets, which will develop in the short term according to 32 percent of the example, while 52 percent wait a fixed trend. The other 16 percent waits a fall

 The internal market is going to fall according to 56 percent of the example, steady for 32 percent. 12 percent wait possible increase in the short term.

 http://machinery.furkey.com/en-US/turkish-machinery-sector/2674-decline-in-wood-processing-machinery-orders-in-it.html

[turkeymachinery-blog]

Forest Machinery Market Share In Sweden

The Swedish market for forest machinery stayed powerful in the first half of this year but the big machinery producers are missing market share. That’s the finish of statistics on forwarder sales submitted by Elmia Forest.

 Sales of forest machinery in Sweden attained a record high in 2011. Official statistics display that 398 new forwarders were filed in the country that year. There are no equal figures for reapers but producers report that these machinery also hit a new sales record.

Logically, sales should fall sharply in 2012, which falls between the previous record year and the world’s biggest forestry exhibit next year, Elmia Forest 5–8 June 2013. However, the first seven months of this year outshone all hopes with 177 newly filed forwarders. With the exception of last year, so a lot of machinery have not been sold since 2007. “We have every cause to be pleased with a amount market of 600 forest machinery,” comments Eero Lukkarinen, manager of Ponsse’s Swedish subsidiary. “At the finish of the 1990s, 450 to 500 units were sold every year in Sweden.”

 http://machinery.furkey.com/en-US/turkish-machinery-sector/2675-forest-machinery-market-share-in-sweden.html

[turkeymachinery-blog]

Agricultural Machinery In Egypt

The agricultural machinery; tractors in Egypt was described at 103.188 in 2008. Agricultural machinery means to the number of wheel and crawler tractors (not including garden tractors) in use in agricultural at the finish of the calendar year indicated or during the first quarter of the next year. Egypt has one of the most highly-developed and different economies in the Middle East. Farming (cotton, corn, sugarcane, fruit and vegetables, fodder, and rice), industry (textiles and clothing, chemicals, steel, consumer electronics and home appliances) and services (tourism) stand for nearly equal rates in national production. However, despite high levels of economic growth over the past few years, living conditions for the average Egyptian remain bad.

 http://machinery.furkey.com/en-US/farm-machinery/2672-agricultural-machinery-in-egypt.html

[turkeymachinery-blog]

Wood Working Machinery From Turkey

Seniz Machinery was founded in 1980. 30 years of experience and a 800 m2 closed area carries out its activities.

As a company, the importance given to quality, "the highest standards to ensure customer satisfaction," he summed up briefly. According to them, high-quality production, within the framework of customer satisfaction using quality materials to bring the product to the customers and provide after-sales service.

Products;

Timber & Furniture  Machinery,

Carpenter Machine,

Fully Automatic Timber Trucks,

Paving Machines Production

http://machinery.furkey.com/en-US/turkish-machinery-sector/2673-wood-working-machinery-from-turkey.html

[turkeymachinery-blog]

Turkish Machinery Export Raised 54 Percent

The machinery export of our country to Germany quadrupled between 2002 and 2012. Amongst the import partners of Germany, to which our exports raised by 54 in 2012, Turkey is the 20th major provider. Germany orders first among Turkey’s machinery export partners in 2012 wıth 2 billion dollars and a part of 17 percent. The main point of Germany’s import from Turkey is engınes, accessories and spares. In Germany, which developed double as quick as both EU countries and USA in 2012 with a 3 percent rate of growth in its economy, the GDP at flow costs totaled to 3 trillion euros in the same year. The GDP per capita is about 44 thousand dollars.   

The country has a lot of worldwide companies in the manufacturing in-dustry; however, medium sized companies are thought to be the spine of both the manufacturing industry and the German economy. These companies, generally employing a personnel of less than 500 workers, are predominantly based in western states. The six most economically grew states in Germany.

Germany was Turkey’s major machinery export partner in 2012 with an export amount of 2 billion dollars and a share of 17 percent. However, we rank 20th in the machinery import of Germany, such an significant machinery export partner, and our share is only 1 percent, which means that we can't fully utilize our potential. According to TÜİK data, the volume of the foreign trade of machinery and accessories between Germany and Turkey attained its top level in 2011 and surpassed 7 billion dollars. Germany is a country against which our country has a foreign trade shortage. While our export to Germany in the sector incre-ased by 54 percent in 2011, our import raised by 40 percent.

Between 2002 and 2012, our machinery export to Germany quadrupled and our machinery import from Germany tripled. In this period, the highest export and import increase rates were registered in 2003. By the 84th chapter, the main product group in our machinery and accessories export to Germany is engines, accessories and spare parts. In 2012, an growth was filed in the top 20 product groups in our machinery export to Germany.  The highest export growth was watched in central warming boilers with a rate of 455 percent. By the 84th chapter, the main product groups in Turkey’s import from Germany in 2012 are engines, engine accessories and spares, centrifuges, tools for refining and filtering gases, rubber and plastic machines.

 http://machinery.furkey.com/en-US/turkish-machinery-news/1671-turkish-machinery-export-raised-54-percent.html

[turkeymachinery-blog]

The Food Working Industry A High Priority Sector For The Government Of India

The  food processing industry is a high priority sector for the Government of India, and  it's get prepared for flawless growth in the future years.  the Government  has acknowledged a major policy decision for commercialising agriculture and growing food processing, conservation and packaging sectors, according to a 2010 report by TEDO (Technology Exports Development Organisation), a PPP adventure supporting Indian SMEs in technology exports.

 The report also says that the technology present in India in the agro-food working equipment sector isn't much grew when compared to grew countries. As the food working sector is being identified as high priority industry in India, the equipment sector is also earning importance.

 The food working industry is active and fast-paced. The food working industry keeps a unique place in the Indian economy. The changing food habits, ready-to-eat and so lifestyle have given new opportunities to food manufacturers, machinery producers, technology and service providers. The food working industry has taken a new way and is developing steady with almost 7% growth annually. Substructure development will take this industry to new heights in the near future with the help of enough investments and exports.

 http://machinery.furkey.com/en-US/turkish-food-beverage-processing-machinery/2671-the-food-working-industry-a-high-priority-secto.html

[turkeymachinery-blog]

Global Textile Machinery Market Development

Global market for textile machinery is expected to attain $22.9 billion by 2017. Textile machinery is used in the production of thread, yarn, fabric, and the completing concerned in the manufacturing of specialty fabrics. Textile engineering industry which started as an branch of the textile industry has gone through significant improvements.   Market for textile machinery is very dynamic, variable from conventional to much more advanced ones due to steady technological progresses. An increasing market require for home textiles, furniture upholstery, automobile textiles, and fashion trends also affect the require for textile machinery.   Asia-Pacific personifies the greatest and quickest growing area for textile machinery. Increasing investments in textile production in the Asian areas fuel the market for textile machineries. Asian country  such as India, China, and Pakistan expect favorable market for textile machinery due to the changeable of manufacturing processes from EU and US to pick up price benefits. Industrialization and economic development in China during the recent past has increased their textile production. China's Fifth Five Year project, 2011-2015 focuses much more on technological advancement of their textile industry. India purposes to attain enormous gains in export of textile and clothing in the coming years.

http://machinery.furkey.com/en-US/apparel-textile-machinery/1670-global-textile-machinery-market-development.html

[turkeymachinery-blog]

Taiwan Industrial Development Bureau’ s Support Project

Taiwan’s Industrial Development Bureau (IDB) recently proclaimed a plan to assistant Taiwan’s machine  industry with growing smart design and manufacturing to growth the industry’s revenue to NT$255 billion (US$8.5 billion) by 2020. The bureau’s project includes using data communication technology and addressing user require in product development, as well as cover turnkey planning service for customers to establish sales.

 The bureau displayed that last year the machine  industry had total revenue of US$92.7 billion global and Taiwan was the No. 4 exporter, after only Japan, Germany and Italy, and that middle priced machines with value-added designs have feasible in developing markets.

 In 2011, Taiwan’s machine  industry generated revenue of NT$155 billion (US$5.1 billion), with sale service accounting for a inadequate 3%. The bureau plans to supporter  increase the industry’s revenue to NT$255 billion, and sale service to around 20% of the total, with smart machines to consist 30% of total output by 2020. Also, the bureau pledges to help 100 manufacturers install ICT, 20 manufacturers install application -technology center and 20 producers service platform.

 http://machinery.furkey.com/en-US/turkish-machinery-news/1669-taiwan-industrial-development-bureau-s-support-pr.html

[turkeymachinery-blog]

Machine Exports - Imports

A lot of explorations made in the early times of humanity, such as grinding of stones and thus making of the simplest tools, the discovery of the wheel, moving heavy blocks on around wood, hoisting the freights higher by utilizing the simplest spools, create the basis of the history of machinery. Inventions like lever, pulley, winding wheel, chock and even pen, are among the first examples of machinery. Well, but from which continents do people buy machines of all subsectors of machinery and what do they send and to whom? Five continents in the world are subject to machinery export and import. They are Africa, America, Asia, Europe and Australia. These continents, constantly in rivalry for higher shares of economy, not only help with the development of humanity but also lend to the development of technology through the machines they manufacture.

  Europe leads machinery import

 According to the general import of the continents in 2010, the total product buy total equalled to 15 trillion 203 billion dollars. Machinery, with a share of 8,36 percent of the general import of the continents, accounts for 1 trillion 817 billion dollars of this total. Europe, having a share of 5 trillion 878 billion dollars in general product import, is the leading machinery importer as well with 656 billion 202 million dollars. The unchanged ranking in both machinery import and general import is: Europe, Asia, America, Africa, Australia.

  Asia leads machinery export

 Besides machinery import, countries in these continents vie in manufacturing, too. Continents that exceed the others due to different reasons are in a fierce competition among themselves in exporting their products. However, Asia keeps defending its position as the leading exporter. According to the 2010 data, Asia’s general export totaled to 5 trillion 816 billion dollars and this continent led the world in machinery export with 764 billion 518 million dollars. General export totaled to 15 trillion 23 billion dollars and the machinery sector had a share of 8,41 percent of this total, rising to 1 trillion 787 billion dollars.

 Asia and Europe, which have a say in export and import partially thanks to the geographic location of our country, keep competing global. Africa, on the other hand, is going through a big economic variety. The growth potential of the region whet the desire of global companies. The economic size of the Sub-Saharan region of Africa had reached the same level as that of the Brazilian and Russian economies by 2008 with 1,6 trillion dollars and it is anticipated that the total economic size of the Dark Continent will have reached 2,6 trillion dollars by 2020. Between 2000 and 2010, Africa had 6 of the 10 fastest-growing economies in the world. According to economists, it will have 7 of them in 2015 and record a higher growth rate than Asia.

 http://machinery.furkey.com/en-US/turkish-machinery-sector/1666-machine-exports-imports.html

[turkeymachinery-blog]

Growing Organized Industrial Zone

Ankara 1st Organized Industrial Zone, which began to save the capital from being a center of expenditure, supplies added value to the economy and industry of the country. This OIZ, which emerged as a outcome of the disorderliness made by the facilities located in different parts of the city, lacking enough infrastructure, piled diffusely and not fitting any more into their location due to developments in time, was established thanks to the endeavors started by Ankara Chamber of Industry. After the signing of a protocol in 1978, the infrastructure work for Ankara Organized Industrial Zone began in 1981 on an area of 4 million 147 thousand 980 square meters at a distance of 25 km to the city center. 175 thousand 487 square meters of this area was allocated to cultural facilities, 1 million 25 thousand to green areas and 2 million 104 thousand 955 square meters to the parcels for industrial facilities. “We have an essentıal role ın machınery manufacturıng” Stating that a high number of companies at ASO 1st OIZ focus on machinery- directed activities, Özdebir said: “245 factories are dynamic in our zone, a manufacturing center with an occupancy rate of 95 percent. As we are a foreign market oriented OIZ, 85 percent of our businesses export their products. Most of this export goes to EU and North African countries. The machinery sector has a share of 23 percent of the overall manufacturing in our zone, which is a mixed OIZ. Leading companies of our country’s machinery sector manufacture in ASO 1st OIZ. Among these famous companies are Hidromek in the construction machinery sector, Erkunt Traktör in the tractor and spares sector, NACE Machine, Aymak, Uğur Machine, Endümak in the stone breaking and sieving machinery manufacturing, Çesan in the asphalt machinery manufacturing, Hidrolift, Ermaksan, Özçelikler, Assan machine and Hidroan in the machinery spares manufacturing.”

 http://machinery.furkey.com/en-US/turkish-machinery-sector/1668-growing-organized-industrial-zone.html

[turkeymachinery-blog]

The World’s Largest Asphalt Machine From Bursa

Icon Group company operating in Bursa, produced the world’s largest asphalt machine. Icon Group at a ceremonial held at the facilities Sehabettin Harput Bursa Governor, former State Minister Turan Tayan, Osmangazi Mayor Mustafa Dundar, Mustafa Bozbey Nilufer Mayor, Director of Special Provincial Administration Nurettin Hunting, Turkey Union of Chambers and Commodity Exchanges (TOBB) Executive Board Member of the Bursa Chamber of Commerce and Industry Room (BCCI) Vice President Ilhan Parseker, BCCI Chairman Celal Sonmez, Bursa Industrialists’ and Businessmen’s Association (BUSİAD) Chairman Arif Ozer Necati Sahin Head of Bursa Branch of Chamber of Civil Engineers, Mechanical Engineers, President Abraham March, Director of Special Provincial Administration Hunter Nurettin including many bureaucrats, industrialists and NGO representatives were present. Special Conditions Of Patent And Invention Speaking at the ceremony, Chairman of Icon Group Nezir Ganja, Bursa, many of them, in none of the fair is organized, and been reminded that the ceremony ’held in Munich in the encouragement of close friends who also consulted and their addition process fair BAUMA wanted to partake with you, "he said. Every three years the trade fair held in Munich, Germany more than 200 countries joined the company around three thousand and 400 thousand people visited the fair, the world’s largest trade fair in every sense, "he said. Show BAUMA the firms involved in the field of attention that they are the most advanced and high technology Gencer, said: "Maüdenlerde 500 tons of running off-road earth-moving trucks to the carrier at a time, the four engined eksavatörler 35 cubic meters of excavation, 1000 tons of cargo is removed kreinlerin showed Catterpillar, Komatsu, Volvo, Libher, Amman, Samsung, Vogöle, Wirtgen companies admitting worldwide giants such as BAUMA Fair rules of participation are heavy. Which is shown in the patent or the original design of each product must be absolutely his own. Location rental, 50 personnel to obtain a visa, will be customers of the possible hosting of guests, depending on the EU, there are challenges in a country can make its own elemanlarınızla assembly and disassembly. However, despite all the difficulties we and our country since 2004, attending BAUMA Fair, would represent the best of Turkish industry. "

http://machinery.furkey.com/en-US/turkish-machinery-sector/1662-the-worlds-largest-asphalt-machine-from-bursa.html

[turkeymachinery-blog]

Key Principles Of Machinery And Equipment Safety

Mechanical hazards

 Machines have moving pieces. The action of moving parts may have enough powerin movement to reason harm to people. When reviewing machinery and equipment for feasible mechanical hazards, consider:

• machinery and equipment with moving pieces that can be achieved by people

• machinery and equipment that can throw out objects (pieces, components, products

or waste items) that may hit a person with enough power to reason damage

• machinery and equipment with moving pieces that can reach people such as

booms or mechanical appendages (arms)

• mobile machinery and equipment, such as forklifts, pallet jacks, earth moving

equipment, operated in areas where people may gain access.

Common mechanical hazards and associated risks for machinery and equipment are shown below.

 Non-mechanical hazards

 Non-mechanical hazards associated with machinery and equipment can include Dangerous emissions, comprised fluids or gas under force, chemicals and chemical by-products, electricity and noise, all of which can cause important harm if not adequately checked. In some cases, people displayed to these ventures may not display signs of harm or illness for years. Where people are at risk of harm due to dangerous emissions from machinery and equipment, the emissions should be Checked at their source. When reviewing machinery and equipment for possible non-mechanical Ventures, consider how machines and equipment can affect the area (environment) around them.

 Common non-mechanical hazards are shown below.

 Access hazards

 People must be supplied with safe access that is appropriate for the work they perform in, on and round machinery and equipment. A steady work platform suitable to the nature of the work that permits for good stance relative to the work performed, sure Basis, secure environment and fall prevention (if a fall may occur) is a basic requirement.

As an example, cooling towers on building roofs may have poor accession, yet must be attended by a service person at predictable times for water treatment, chemical dosing or monitoring of automated dosing equipment. People performing these tasks must be supplied with the means to get themselves and any equipment they require onto the roof with no risk or minimal risk of fall or harm.

 http://machinery.furkey.com/en-US/turkish-machinery-sector/1664-key-principles-of-machinery-and-equipment-safety.html

[turkeymachinery-blog]

Packaging Machinery Industry

Food processing is the greatest market for packaging machinery industry. It is foretold that it will account for 43 % of global product sales in 2012.If the above guess keeps actual, India's packaging machinery manufacturers would be treated with a double bonanza. India is just the right market for players of packaging machinery manufacturers.

 Food processing and pharmaceutical industries, the biggest drivers for packaging, are on growth trajectory. The organized retail market is growing and the government is also thinking over to permit FDI in multi brand retail. The growing middle class population, rising health consciousness, competition from the west, are all the supporters for packaging and packaging machinery industry in the country. The current quantity of the market of the world packaging machinery is around $30.9 billion. Top countries producing packaging machinery are Germany (23%), Italy, (16%), Japan (11%), USA (10%) and China (6%), according to VDMA estimates.

 The market for India's food packaging equipment amounts to about $ 80 million. India has around 600-700 packaging machinery producers, 95% of which are placed in the small and medium sector placed all over India. The imports of India's packaging machinery are precious $ 125 million and the exports are speedily growing. Though Germany and Italy are the suppliers of packaging machinery to India the center is now varied on Taiwan, Korea and China. “The high-end machinery is imported from Europe and the low-end ones which are a comparatively cheaper from China,” says Sanjeev Kansal, MD, Global K Associates. Where producing machinery is related India is producing the basic machinery, however the growing population is creating a demand for advanced state-of-the-art technology. India deficiencies in the production of high-end advanced technology.

Also, the fact that the import tariff on packaging machinery equipment is around 30% so it is easier to import machinery in India. But even with low import tariff many Indian packagers are incapable to import machinery due to the high price of the machines. However, the increasing investments by both domestic and external companies in the Indian food processing sector, particularly in drinks, dairy products, processed food, eatable oil, and marine products have expanded the market for packaging machinery. India operations only 2% of its food produce, that explains the scope for packaging. One good news for the packaging machinery industry came with the standardisation of excise tax . The excise tax  has been decreased from 24% to 16%. With growing awareness Asia, especially India, is including the idea of instant cooking and so opened the commercial gates for the packaged food industry in the country. Time limited consumer (TLC) is the driving factor for the growth of packaged RTE and OTG products in India. The total commercial volume of packaged food in Asia in 2009 was around 132 million tonnes. China led the market with a share of around 50 million tonnes, traced by Japan (22 million tonnes) and India (18 million tonnes). India is forecast to reach 25 million tonnes by 2014.

  In India's packaged food part, dairy led the market with a share of around 11.2 million tonnes. It was followed by bakery products (3.5 million tonnes), oils and fats (1.5 million tonnes), dried processed food (0.7 million tonnes) and confectionery ( 0.2 million tonnes). Packaged dairy industry is waited to reach 15.6 million tonnes by 2014, whereas bakery will touch 4.2 million tonnes by 2014. Also oils and fats will conduce 2 million tonnes, dried processed food 1.2 million tonnes and confectionery 0.4 million tonnes by 2014. The main function of packaging is to protect a product, give it a visual appeal, provide hygiene and preserve it during seasonal variants. From a consumer point of view easiness of handling and decomposability are the qualities that make a good package. Accordingly packages are developed and delivered.

 http://machinery.furkey.com/en-US/turkish-packaging-machinery/1665-packaging-machinery-industry.html

[turkeymachinery-blog]

Turkish Machine Exports

Ordered  29th  in export and 27th in import in the World. 6th  greatest machinery manufacturer of EU and privileged for quality productions by developed states. German is Better partner of Turkey in machinery export . After world financial crisis, Turkish industry has an occasion to show itself. Turkey will slope to place itself among top ten developed states in the future decade. Turkey is a good place to invest and Turkish machinery and accessories sector is a good partner to work with.

In 2023, Turkey is aiming to attain USD 500 billions amount export which entails USD 100 billions of machinery export.  After worldwide crisis, in the last one-fourth of 2009, many industries started to recover.

  Advantages

¤ High value of internal input,

¤ External market and client contentment oriented,

¤ Geographical proximity to strategic partners,

¤ Relatively low cost of highly educated, talented and young manpower,

¤ Experience in design and engineering

¤ Turkish machinery sector is able to meet the necessaries of industry.

 http://machinery.furkey.com/en-US/turkish-machinery-sector/1659-turkish-machine-exports.html

[turkeymachinery-blog]

China International Industry Fair

Collectively organized by eight Chinese Ministries and Shanghai Municipal People’s Government, co-organized by People's Republic of China Machinery Industry Federation and managed by Shanghai East Best International (Group) Co., Ltd. China International Industry Fair (or “CIIF”) is a prominent case on equipment manufacturing in China, which is regulation on November every year. Since CIIF‘s building in 1999, CIIF has become one of the most in l international industry mark fair in China, through implementing “professionalization, marketization, internationalization and marking” as its strategies for over 13 years. CIIF, an UFI competent event, is a important event for manufacturing in China as well as an important window and program open to the world for external trade, communication and cooperation on industrial area. China International Industry Fair 2012 is going to organize during November 6 to 10, 2012 at Shanghai New International Expo Centre. 7Theme Shows will be organized concurrently under CIIF 2012. CIIF 2012 will occupy 150,000 sq. meters as its show area and appeal more than1,800 exhibitors and 100,000 trade visitors.

http://machinery.furkey.com/en-US/events/1660-china-international-industry-fair.html

[turkeymachinery-blog]

Control Machinery

As the computer hardware of an utility technology gets more complex, new ways to the working of materials into appropriate products insert joint use. This has been the trend in machining ways in ago years. Latitude development in a another technologies such as electronics and computers have made existing to the machine instrument designer methods and operations that can permit a machine instrument to far exceed the capabilities of the most skilled machinist. To government it very simply, the MR value has göne from the old days to the area shuttle days nearly overnight. This chapter will give you some data on the impress numerical control (NC) has had in the area of machining. It is only an overview and cannot be due to take the place of a programming hand-operated for a specific machine, at work  education, or MR “C” school.

With the development of NC, a variety of input media has been used to convey the information from the print to the machine. The most common kind of input media used in the past were magnetic tape, perforated cards, and punched tape. Nevertheless, most of the new machines are controlled by computers. All of the machines on board Navy medium care actions (IMAs) are computer numerical control (CNC). There are many vantages to utilizing NC machines. The biggest vantage in NC machining comes from the unerring and fast location movements possible. An NC machine doesn't stop at the end of a hack to plan its next move. It does not get fatigued and is talented of perpetual machining, error free, hour after hour. In the past, NC machines were utilized for mass production. With the entry of CNC, a suitable machinist can program and produce even a single part economically.

 http://machinery.furkey.com/en-US/electric-machinery/1661-control-machinery.html