stamping (metal working)

[abramdong]

SUREALONG Floating Shelf Bracket- Blind Shelf Supports - Hidden Brackets for Floating Wood Shelves - Concealed Blind shelf Support – Screws and Wall plugs Included

[abramdong]

Floating Shelf Bracket - Blind Shelf Supports - Hidden Brackets- Conceal...

[abramdong]

gang nail plates https://www.instagram.com/p/Bv_4ZIbAQ_u/?utm_source=ig_tumblr_share&igshid=1blrlwqt9cq7e

[abramdong]

truss nail plates https://www.instagram.com/p/BuRL5legQCZ/?utm_source=ig_tumblr_share&igshid=1fdpglfq5vxoz

[abramdong]

truss nail plates https://www.instagram.com/p/BuGt5FGg1cK/?utm_source=ig_tumblr_share&igshid=93dpulxi5ue0

[abramdong]

Hot dipped galvanized steel construction angle bracket

Hot dipped galvanized steel construction angle bracket

Angle connector A with reinforcement rib is ideal for high-quality load-bearing wood/wood and wood/concrete connections in timber construction. Universally suitable for standard connections such as intersecting timbers.

Hot dipped galvanized steel shelf angle bracket

[abramdong]

4x4 galvanized post support bracket

4x4 galvanized post bracket

Post and Column Bases secure the bottom of posts or columns to concrete and are perfect for decks or patio covers. Models are available for attaching to existing hardened concrete, wet concrete, as well as wood. The PB series provides a connection between a post (or column) for decks, patio covers and other top-supported structures. Embeds in wet concrete after pour and is made to install flush with the concrete surface

Embossment in the seat of the base gives increased strength

Stress relief holes under the base resist tearing during loading

Nominal Post Size: 4 in. x 4 in.

Made from 12-Gauge steel

ZMAX galvanization offers extra corrosion resistance for exterior and treated-wood applications

Install with 16d common nails

[abramdong]

China iron plate nail, gang nail plate for roof trusses/Wood Connector Perforated Nail Plate

China iron plate nail, gang nail plate for roof trusses/Wood Connector Perforated Nail Plate

gang nail plate

Alibaba China iron plate nail, gang nail plate for roof trusses/Wood Connector Perforated Nail Plate Material： DX51D-Z275/G300-Z275 Process： Stamping/Punching/Bending Size： Can be customized Surface： Galvanized sheet Type： Wood connector Quality： MOQ 2000pcs Packaging： General standard export packing/Accept customized packaging

Specifications

Mending plates SUREALONG NAILPLATES – STANDARD & SPECIAL; Hammer Fixed, Easy to Use Nail plates for Many Applications;

Description: SUREALONG Nail plates are available in a wide standard range as tabulated opposite. Larger sizes are available on request. Other forms of this plate could be developed given sufficient demand for the product. The steel used is 1.0 mm thick, Zinc Form DX51D-Z275 / G300 Z275 or equivalent. Product codes for non-special plates refer to the number of columns of nails and the number of rows. Eg, A 4R8 has 4 rows and 8 columns.

Features: SUREALONG Nail plates are galvanised steel connectors with in-built, bent-up nails. These plates are ideal for many structural and nonstructural timber jointing and timber protection uses. Applied simply by hammering in the "knuckle nails"these plates are used by tradesmen, home owners, frame and box manufactures, electricity supplyauthorities and builders. Special pressingequipment is not necessary. Available in the following sizes:

[abramdong]

Timber connectors from SUREALONG

Hello,

This is Abram from Surealong Group Corporation (Beijing,China). As a professional manufacturer of timber connectors,we had lot of experiences to export European market,North American market,New Zealand and Australia market. and the packages could be printed with your LOGO and company information. Our products are certificated by CE and ISO9001:2008. Main products include truss connector plate,perforated steel strap,galvanized steel strap,gang nail plates,galvanized nail plates,toothed connectors,toothed plates,joist hangers,truss hangers,saddle purlin hanger,angle connectors,timber connectors,wood connectors,lumber connectors,timber plates,post support,steel ties Abram Dong www.woodenconnector.com

SureAlong Group Corporation Mobile Phone: [phone] E-mail : [email protected] Skype:abramdong

[abramdong]

Timber Connector Nail Plate for wooden house

Galvanized gang nail plate

Galvanized gang nail plate is also could be called truss connector plate.A truss connector plate is a kind of tie. Truss Plates are light gauge metal plates used to connect prefabricated light frame wood trusses. They are produced by punching light gauge galvanized steel in order to have teeth on one side. The teeth will allow to join different trusses together by being embedded into the lumber using an hydraulic press or a roller. Nail plates are used to connect timber of the same thickness in the same plane. When used on trusses, they are pressed into the side of the timber using special hydraulic tools. As the plate is pressed in, the nails are all "driven" simultaneously and the compression between adjacent nails reduces the tendency to split. A truss connector plate is manufactured from ASTM A653/A653M, A591, A792/A792M, or A167 structural quality steel and is protected with zinc or zinc-aluminum alloy coatings or their stainless steel equivalent. Metal connector plates have integral teeth and are manufactured to various sizes (that is, length and width) and thickness or gauges and are designed to laterally transmit loads in wood. They are also known as stud ties, metal connector plates, mending plates, or nail plates. However, not all types of nail plates are approved for use in trusses and other structurally critical placements.

[abramdong]

Galvanized I joist face mount for timber connectors

Galvanized I joist face mount for timber connectors

Joist Hangers are designed for use where a strong, rigid joint is required between members meeting at 90?, e.g. truss/joist to beam, or rafter to bearer connection. Material: DX51D-Z275/G300-Z275 Process: Stamping/Punching/Bending Size: Can be customized Surface: Galvanized sheet Type: Wood connector Quality: MOQ 2000pcs Packaging: General standard export packing/Accept customized packaging

Specifications

Joist Hangers 0.91mm G300 Z275 / DX51D-Z275 Galvanised Steel Joist Hanger 47 x 90 Designed for use where gauged timber of 47mm width and up to 150mm deep.

Joist Hanger 47 x 120 Multi-use bracket suitable for gauged 47mm thick timber up to 200mm deep.

Joist Hanger 47 x 190 Used for gauged 47mm thick timber up to 300mm deep.

Joist Hanger 70 x 180 A special size joist hanger designed for gauged 69mm wide timbers.

Joist Hanger 95 x 165 For use on gauged 94mm wide timber or double joists/trusses.

Note: Joist Hangers 52mm wide also available for rough sawn timber.

All of the above Joist Hanger connections should be fixed using nails 30mm x 3.15mm diameter, or Type 17-12g x 35mm Hex Head Screws.

NOTE: Our factory provide custom processing services, can be produced according to customer's drawings.

[abramdong]

Wood Connector Joist Hanger / metal connecting brackets for wood

Joist Hangers are designed for use where a strong, rigid joint is required between members meeting at 90?, e.g. truss/joist to beam, or rafter to bearer connection. Material: DX51D-Z275/G300-Z275 Process: Stamping/Punching/Bending Size: Can be customized Surface: Galvanized sheet Type: Wood connector Quality: MOQ 2000pcs Packaging: General standard export packing/Accept customized packaging

Specifications

Joist Hangers 0.91mm G300 Z275 / DX51D-Z275 Galvanised Steel Joist Hanger 47 x 90 Designed for use where gauged timber of 47mm width and up to 150mm deep.

Joist Hanger 47 x 120 Multi-use bracket suitable for gauged 47mm thick timber up to 200mm deep.

Joist Hanger 47 x 190 Used for gauged 47mm thick timber up to 300mm deep.

Joist Hanger 70 x 180 A special size joist hanger designed for gauged 69mm wide timbers.

Joist Hanger 95 x 165 For use on gauged 94mm wide timber or double joists/trusses.

Note: Joist Hangers 52mm wide also available for rough sawn timber.

All of the above Joist Hanger connections should be fixed using nails 30mm x 3.15mm diameter, or Type 17-12g x 35mm Hex Head Screws.

NOTE: Our factory provide custom processing services, can be produced according to customer's drawings.

[abramdong]

Multi-purpose galvanized plate for timber connectors

Multi-purpose galvanized plate for timber connectors

A multi-purpose galvanised plate manufactured from 1mm steel, used to connect timbers without the use of nails.

This product must not be used to fabricate roof trusses.

Qty 100 per box Galvanized gang nail plate

Galvanized gang nail plate is also could be called truss connector plate. or truss nail plateA truss connector plate is a kind of tie. Truss Plates are light gauge metal plates used to connect prefabricated light frame wood trusses. They are produced by punching light gauge galvanized steel in order to have teeth on one side. The teeth will allow to join different trusses together by being embedded into the lumber using an hydraulic press or a roller. Nail plates are used to connect timber of the same thickness in the same plane. When used on trusses, they are pressed into the side of the timber using special hydraulic tools. As the plate is pressed in, the nails are all "driven" simultaneously and the compression between adjacent nails reduces the tendency to split. A truss connector plate is manufactured from ASTM A653/A653M, A591, A792/A792M, or A167 structural quality steel and is protected with zinc or zinc-aluminum alloy coatings or their stainless steel equivalent. Metal connector plates have integral teeth and are manufactured to various sizes (that is, length and width) and thickness or gauges and are designed to laterally transmit loads in wood. They are also known as stud ties, metal connector plates, mending plates, or nail plates. However, not all types of nail plates are approved for use in trusses and other structurally critical placements.

[abramdong]

Galvanized Knuckle Nail Plate for timber connectors

Galvanized Knuckle Nail Plate for timber connectors

Knuckle Nailplates are galvanised steel connectors with in-built, bent-up “knuckle” nails. These plates are ideal for many structural and non-structural timber jointing and timber protection uses.

Applied simply by hammering in the “knuckle nails”, these plates are used by tradesmen, home owners, frame and box manufactures, electricity supply authorities and builders. Special pressing equipment is not necessary.

Among the many uses of Knuckle Nailplates (see Applications following), the most common are: jointing of wall frames together on-site. – on-site splicing of timber beams. – reinforcement of corners of boxes and bins. – reinforcement of bolted joints (eg: in Cable Truss). – end protection of scaffold planks. – truss manufacture in areas with low labour costs.

Generally, Knuckle Nailplates: provide a strong, economical and easy-to-use means of jointing timber together – protect timber from damage as they: – resist splitting due to drying of the timber, nailing near ends or other causes eg: Floormates and Bin Straps. – resist the effects of impact loads such as from fork lift tyne strikes. – dissipate electricity current surges in cross arms over a larger area (eg: Shunt plates) distribute concentrated loads over a wider area. For example, they increase the strength of bolted joints, hold joints together, preventing or restricting the separation of nailed joints such as in boxes and crates, eg: Bin Straps.

Description: Multi-purpose connector for structural and non-structural timber joining and timber protection use.

Usage(s): Framing repair or reinforcement; Timber jointing; Wall frame to frame connection.

[abramdong]

Timber Connection Nail Plate

Galvanized gang nail plate

Galvanized gang nail plate is also could be called truss connector plate.A truss connector plate is a kind of tie. Truss Plates are light gauge metal plates used to connect prefabricated light frame wood trusses. They are produced by punching light gauge galvanized steel in order to have teeth on one side. The teeth will allow to join different trusses together by being embedded into the lumber using an hydraulic press or a roller. Nail plates are used to connect timber of the same thickness in the same plane. When used on trusses, they are pressed into the side of the timber using special hydraulic tools. As the plate is pressed in, the nails are all "driven" simultaneously and the compression between adjacent nails reduces the tendency to split. A truss connector plate is manufactured from ASTM A653/A653M, A591, A792/A792M, or A167 structural quality steel and is protected with zinc or zinc-aluminum alloy coatings or their stainless steel equivalent. Metal connector plates have integral teeth and are manufactured to various sizes (that is, length and width) and thickness or gauges and are designed to laterally transmit loads in wood. They are also known as stud ties, metal connector plates, mending plates, or nail plates. However, not all types of nail plates are approved for use in trusses and other structurally critical placements.

[abramdong]

Hot dipped galvanized steel angle bracket

Angle connector A with reinforcement rib is ideal for high-quality load-bearing wood/wood and wood/concrete connections in timber construction. Universally suitable for standard connections such as intersecting timbers.

[abramdong]

Hot dipped galvanized joist hanger bracket

Joist Hanger Joist Hangers are designed for use where a strong, rigid joint is required between members meeting at 90?, e.g. truss/joist to beam, or rafter to bearer connection. Material： DX51D-Z275/G300-Z275 Process： Stamping/Punching/Bending Size： Can be customized Surface： Galvanized sheet Type： Wood connector Quality： MOQ 2000pcs Packaging： General standard export packing/Accept customized packaging

Specifications

Joist Hangers 0.91mm G300 Z275 / DX51D-Z275 Galvanised Steel Joist Hanger 47 x 90 Designed for use where gauged timber of 47mm width and up to 150mm deep.

Joist Hanger 47 x 120 Multi-use bracket suitable for gauged 47mm thick timber up to 200mm deep.

Joist Hanger 47 x 190 Used for gauged 47mm thick timber up to 300mm deep.

Joist Hanger 70 x 180 A special size joist hanger designed for gauged 69mm wide timbers.

Joist Hanger 95 x 165 For use on gauged 94mm wide timber or double joists/trusses.

Note: Joist Hangers 52mm wide also available for rough sawn timber.

All of the above Joist Hanger connections should be fixed using nails 30mm x 3.15mm diameter, or Type 17-12g x 35mm Hex Head Screws.

NOTE: Our factory provide custom processing services, can be produced according to customer's drawings.