Untitled

[anchormark]

FLUlDRY Fluid Bed Dryer - FBD - works on the principle of creating a fluid turbulence in a granulated or powdery wet product

Fluid Bed Dryer FBD /Processor – FLUIDRY

FLUlDRY Fluid Bed Dryer FBD works on the principle of creating a fluid turbulence in a granulated or powdery wet product by means of hot or dehumidified air flowing in an upward direction and drying the product to the required degree.

Salient Features of the Fluid Bed Dryer FBD FLUIDRY

Contact parts in SS 316 ISS 316L can be provided as per user requirement.

Short drying time and Low drying temperature.

Uniform drying.

Rapid exchange of granules.

Single piece retarding chamber and finger bag chamber with inflatable gasket.

Electric I steam I hot water circulation -air heating systems with SS heat exchangers.

Fully automatic bag shaking I lifting I lowering arrangement.

Intrinsically safe earthing mechanism.

Compact design.

Inlet-air filtration system having 20 Micron Coarse Filter, 5 Micron Pre Filter and 0.3 Micron HEPA filters (Efficiency 99.9 %) can be provided as an option.

Differential pressure gauge across micro-vee and filter bag can be provided as an option.

Air Handling Unit: Consists of Inlet Air Filters (3 Stage) including HEPA and heating coils.

Retarding Chamber: Houses the Finger Bag Assembly

Bag Shaking and Lowering Device: Pneumatically operated specially designed three stage bag shaking arrangement.

Gaskets: Food grade Silicon

Exhaust Air Blower: Centrifugal fan with backward curved impeller in SS I Aluminium I MS painted.

Explosion Vent with Rupture Disc: For relief of explosion or any excess pressure built up, a rupture disc of appropriate material and thickness is provided in the explosion vent.

Sampling Device: To carry out periodical sampling & analysis of material.

Inlet and Exhaust Dampers :with PLC Interface.

Earth Safety Relay: A safety earth circuit relay is provided to discharge static charge.

Solid Flow Monitor: To detect product leakage from filter bag can be provided as an option.

Wash In Place (WIP) System: Can be provided as an option.

https://www.anchormark.com/products/granulation-equipment/fluid-bed-dryer-fbd-fluidry/

[anchormark]

Automatic Liquid Filling Machine - The Linear Filling and Rotary Sealing Units with cap feeding hopper are mounted on a single unit to reduce the time

Automatic Liquid Filling Machine (Linear), Capping and Sealing Machine – LINOFILL Series

The Linear Automatic Liquid Filling Machine and Rotary Sealing Units with cap feeding hopper are mounted on a single unit to reduce the time between filling and sealing operations. The machine has provision for fixing appropriate sizes of syringes to fill bottles of different capacities ranging from a volume of 10 ml to 1000 ml.

Salient Features

Monoblock configuration with filler and capper

No bottle – no fill arrangement

No cap – no seal arrangement

Machine designed to seal ROPP / Screw / CRC caps by changing the sealing head.

https://www.anchormark.com/products/liquid-packaging-equipment/automatic-liquid-filling-machine-linofill/

[anchormark]

FLUlDRY Fluid Bed Dryer - FBD - works on the principle of creating a fluid turbulence in a granulated or powdery wet product

Fluid Bed Dryer FBD /Processor – FLUIDRY

FLUlDRY Fluid Bed Dryer FBD works on the principle of creating a fluid turbulence in a granulated or powdery wet product by means of hot or dehumidified air flowing in an upward direction and drying the product to the required degree.

Salient Features of the Fluid Bed Dryer FBD FLUIDRY

Contact parts in SS 316 ISS 316L can be provided as per user requirement.

Short drying time and Low drying temperature.

Uniform drying.

Rapid exchange of granules.

Single piece retarding chamber and finger bag chamber with inflatable gasket.

Electric I steam I hot water circulation -air heating systems with SS heat exchangers.

Fully automatic bag shaking I lifting I lowering arrangement.

Intrinsically safe earthing mechanism.

Compact design.

Inlet-air filtration system having 20 Micron Coarse Filter, 5 Micron Pre Filter and 0.3 Micron HEPA filters (Efficiency 99.9 %) can be provided as an option.

Differential pressure gauge across micro-vee and filter bag can be provided as an option.

Air Handling Unit: Consists of Inlet Air Filters (3 Stage) including HEPA and heating coils.

Retarding Chamber: Houses the Finger Bag Assembly

Bag Shaking and Lowering Device: Pneumatically operated specially designed three stage bag shaking arrangement.

Gaskets: Food grade Silicon

Exhaust Air Blower: Centrifugal fan with backward curved impeller in SS I Aluminium I MS painted.

Explosion Vent with Rupture Disc: For relief of explosion or any excess pressure built up, a rupture disc of appropriate material and thickness is provided in the explosion vent.

Sampling Device: To carry out periodical sampling & analysis of material.

Inlet and Exhaust Dampers :with PLC Interface.

Earth Safety Relay: A safety earth circuit relay is provided to discharge static charge.

Solid Flow Monitor: To detect product leakage from filter bag can be provided as an option.

Wash In Place (WIP) System: Can be provided as an option.

https://www.anchormark.com/products/granulation-equipment/fluid-bed-dryer-fbd-fluidry/

[anchormark]

The Automatic Rotary Bottle Washing Machine is suitable for rinsing bottles with pressurized water and air wash.

Automatic Rotary Bottle Washing Machine 

The Automatic Rotary Bottle Washing Machine is suitable for rinsing bottles with pressurized water and air wash. It ensures contamination free water wash from one cycle to another. It can be used for washing glass, PET, plastic bottles – round, flat or square shaped. The machine is provided with two water wash sequences and one air wash sequence.

Salient Features

Programmable Logic Control and Human Machine Interface provided to identify fault or malfunctioning of the machine

Variable Frequency Drive provided for machine speed regulation

No Bottle No Wash Arrangement

Polycarbonate Safety Hood provided

Specially designed Block and Piston arrangement for ejecting water for washing process

https://www.anchormark.com/products/liquid-packaging-equipment/automatic-rotary-bottle-washing-machine/

[anchormark]

Automatic Liquid Filling Machine - The machine is a combination of rotary type volumetric filling and ROPP / screw / CRC cap sealing arrangement of glass, PET or HDPE bottles.

Automatic Rotary Liquid Filling machine 

The machine is a combination of rotary type volumetric liquid filling machine and ROPP / screw / CRC cap sealing arrangement of glass, PET or HDPE bottles. It ensures immediate capping and does not permit exposure of the liquid enabling a contamination-free filling.

Salient Features

Can be operated by a single operator.

Safety hood to prevent flying of glass particles in case of breakage of bottles.

Rotary valve design for better accuracy of ± 1%.

No bottle – no fill arrangement to avoid spillage of liquid.

No bottle – no cap system to avoid wastage of liquid.

PLC and HMI system.

https://www.anchormark.com/products/liquid-packaging-equipment/automatic-liquid-filling-machine-rotofill-series/

[anchormark]

Fluid Bed Dryer FBD is used for drying the product to the required degree. The machine is supplied with SS 316/SS 316L contact parts as per user requirement

Fluid Bed Dryer FBD 

The Fluid Bed Dryer FBD is used for drying the product to the required degree. The machine is supplied with SS 316/SS 316L contact parts as per user requirement

Fluid Bed Dryer Models Available: FBD1 (1kg), FBD5 (5kg), FBD10 (10kg)

Salient Features of the Fluid Bed Dryer FBD

Design and finish comply with cGMP standards.

Heating by electricity I steam as per user requirement

Programmable Logic Control with Human Machine Interface, Variable Frequency Drive and HEPA Filter in built for FBD 1

Explosion Vent with Rupture Disc for FBD 5 and FBD 10

Flameproof Construction available as an option

Programmable Logic Control with Human Machine Interface, Variable Frequency Drive and HEPA Filter can be supplied as options for FBD 5 and FBD 10.

Option of providing top spray arrangement for FBD 5 and FBD 10.

https://www.anchormark.com/products/rnd-equipment/fluid-bed-dryer/

[anchormark]

The semi automatic liquid filling machine is useful for small to medium scale operations.

The twin head volumetric semi automatic liquid filling machine is useful for small to medium scale operations. It can be used to fill a variety of liquids for different fill volumes ranging from 10 ml to 500 ml by interchanging syringes. It can also be supplied for 500 ml to 1 litre fill volumes as per user requirement. The machine is supplied with SS 316/SS 316L contact parts as per user requirement.

OUTPUT: 20 to 40 bottles/minute

* The output depends on fill volume, viscosity of liquid, bottle I container’s neck diameter and operator skill.

Salient Features

Filling accuracy +/- 1% depending on the fill volume and viscosity of liquid.

Useful for various types of containers – of different shapes and materials – glass, plastic, metal

Simple to operate and easy to clean.

Variable frequency drive provided for speed adjustment

https://www.anchormark.com/products/rnd-equipment/semi-automatic-liquid-filling-machine/

[anchormark]

Rapid Mixer Granulator

https://www.anchormark.com/products/rnd-equipment/rapid-mixer-granulator/The Rapid Mixer Granulator can be used for mixing of ingredients as well as wet granulation. The machine is supplied with SS 316/SS 316L contact parts as per user requirement

OUTPUT: Interchangeable bowls of sizes varying from 2 to 10 ltrs and 10 to 15 ltrs can be provided

Salient Features

Design and finish comply with cGMP standards.

Variable Frequency Drive for Impeller & Chopper.

Specially designed air-purged cGMP shaft seals.

Programmable Logic Control with Human Machine Interface,

Flameproof Construction, Binder Addition System can be supplied as an option.

Option of providing end point determination by sensing the torque drawn by the main motor

https://www.anchormark.com/products/rnd-equipment/rapid-mixer-granulator/

[anchormark]

Automatic Liquid Filling Machine

The semi-automatic twin head volumetric liquid filling machine is useful for small to medium scale operations. It can be used to fill a variety of liquids for different fill volumes ranging from 10 ml to 500 ml by interchanging syringes. It can also be supplied for 500 ml to 1 litre fill volumes as per user requirement. The machine is supplied with SS 316/SS 316L contact parts as per user requirement.

OUTPUT: 20 to 40 bottles/minute

* The output depends on fill volume, viscosity of liquid, bottle I container’s neck diameter and operator skill.

Salient Features

Filling accuracy +/- 1% depending on the fill volume and viscosity of liquid.

Useful for various types of containers – of different shapes and materials – glass, plastic, metal

Simple to operate and easy to clean.

Variable frequency drive provided for speed adjustment

https://www.anchormark.com/products/rnd-equipment/semi-automatic-liquid-filling-machine/

[anchormark]

A leader in the field of Pharmaceutical Machinery with quality that excels in global markets and headquartered in Mumbai, India.

With advanced and innovative features designed and customised to the need of user, our comprehensive range of equipment caters today to reputed names in the pharmaceutical, food, beverage and cosmetic industry.

Anchor Mark Private Limited was first established in the name of Anchor Mark in 1980 with the objective of manufacturing and marketing machineries for the pharmaceutical, food, beverage and cosmetic industry.