Untitled @bestenindia - Tumblr Blog

Concrete Slump test | Types of Slump || Concrete #slumptest #concrete #Slump

#consultants #mep design #industrial #3d modling

Sprinkler systems are one of the most commonly used fire protection systems by industrial fire protection consultants. However, there are misconceptions that smoke triggers sprinkler systems. The sprinkler system is an essential part of the fire risk management system.

#consultants #industrial #mep design #3d modling #bim

Multi-Disciplinary Project Team?

A multi-disciplinary team consists of people from different disciplines who come together for a common objective

#consultants #industrial #bim #mep design #industrial 4.0

What is an anchor bolt setting plan?

An anchor bolt setting plan is a detailed document or drawing that provides information on the layout, dimensions, and specifications for installing anchor bolts in a construction project.

#consultants #industrial #industrial 4.0 #industrialarchitecture #3d modling

What does the BOQ include?

By System: Industrial projects have multiple disciplines, like civil, MEP, IBMS, and HVAC.

Specifications: Each item should have detailed technical specifications like dimensions, critical dimensions, and other relevant technical details.

Chapters based on special works like steelwork, plastering, finishes, flooring etc.

Quantities: The quantity of items is a critical part of a BOQ. Design consultants must provide accurate and comprehensive quantities.

Other costs: Industrial projects often have additional costs like permits, inspections, testing, and commissioning.

However, the design consultants must ensure the BOQ has sufficient information for the bidder to quote. But at the same time, it must not be too complicated.

#industrial 4.0 #consultants #mep design

What are pipe fittings?

Pipe fittings join straight pipe sections, adapt to different sizes and shapes, or regulate flow. They help create a piping network system. Some pipe fittings are elbows, nipples, couplings, unions, tees, crosses, reducers, return bends, plugs, caps etc.

To conclude, mechanical consultants for industrial projects design a utility and process piping system to suit the project requirements.

What do consultants for fire safety do to mitigate the risks?

Thus, consultants for fire safety must understand the fire risks in the facility and find ways to mitigate the risks. The fire safety systems have to cater to the requirements of the process and be in line with the statutory regulations. Also, regular training for the workforce is a must. Another important step is to ensure regular and proper maintenance of the systems, and emergency exits are free from any materials.

Consultants must ensure that active fire protection systems and passive fire protection systems are used together to ensure proper protection to both life and property.

To conclude, a facility should have fire safety systems as per regulatory compliance. Consultants for fire safety should design the system as per the facility’s process flow.

#industrial 4.0 #fire safety systems

Is a Geophysical Survey Necessary for Designing RWH?

It is critical to find the correct location for recharging groundwater. A geophysical survey helps locate cracks and fractures underground that allow groundwater recharging.

Civil consultants recommend injection borewells near the fractures.

There should be a desilting chamber before the borewell. This chamber ensures that all dirt particles, silt, leaves, and plastic do not contaminate the groundwater.

It is essential to maintain these desilting chambers regularly. Moreover, it is recommended to have the rooftop routinely cleaned. These steps ensure that clogging is avoided.

#industrial 4.0 #civilconsultance #consultants

Apparatus for an Accelerated Cured Concrete Test?

The following apparatus is required;

Slump cone

Cube moulds conforming to IS 516

Mould cover plates

Hot water tank

Cooling water tank

Concrete cube testing machine (CTM)

#industrial 4.0 #consultants

What is the Plum to Concrete Ratio?

Plum volume in concrete shall be as per the engineering specification based on application. When the stones are of 150 mm size, the plum volume in the total concrete shall be kept at 30% to 50% by volume of the finished work. When plums are beyond 160 mm up to any reasonable size is used, the volume of plums shall be limited to 20% by volume of finished concrete work.Readmore..

#industrial 4.0 #consultants

Phases of Energy Audit

Pre- Audit Phase: The pre-audit phase has to be structured and methodical. Additionally, an initial study of the site helps in better understanding and for efficient working. This phase deals with creating an audit team, identification of areas that consume the most energy, identify the instrumentation required for the audit and preparing a time frame.

Audit Phase: The audit phase includes a detailed analysis of various departments/ process equipment over periods of time to understand the energy consumption. Audit includes analysis over both working hours and non-working hours.

Post Audit Phase: This phase deals with the implementation of the audit recommendations and follow-up.

#industrial 4.0 #mep design

Indian design codes and standard regulations for structural engineering

A considerable number of Indian Standard (IS) codes are available for virtually every aspect of structural engineering. Industrial structural consultants who engage in large Industrial projects should refer to several IS codes. The Indian Standards differ based on the design of concrete and steel structures.

Existing building design

Renovation, retrofit, and refurbishment of existing buildings enable structural engineers to uplift the energy performance of Industrial building or decrease energy demand. Modifying the design of an already constructed industry can be a difficult task, especially in case the construction drawings are unavailable. In that case, the structural consultant will have to opt for site measurements and conduct non-destructive tests to assess the present structural design requirements of the site. In the extreme case, load tests have to determine the strength and capacity of the structures.

New building design

Designing an entirely new industrial building can be an extravagant process. New Industrial Building will include a wide variety of structural segments. It can be steel frames, load-bearing systems, concrete constructions in precast or tilt-up structures.

#industrial 4.0 #consultants #structural

MEP Consultants in industrial projects

#industrial 4.0 #MEP #consultants

Architects and Engineers, Industrial Architects, Architects and Consultants, Total Design, Engineering design consultants. Civil design, ME

#industrial 4.0 #consultants

Architects and Engineers, Industrial Architects, Architects and Consultants, Total Design, Engineering design consultants. Civil design, ME

#industrial 4.0 #industrialarchitecture

Structural consultants are needed not only for regulatory compliances but also to ensure that the structure is safe for the occupants.

#industrial 4.0 #mep design #structural design

Want to know the benefits of 3D modeling in industry infrastructure design project, how it is advatageous compared to 2D modeling? Read this

#industrial 4.0 #3d modling

Trending Blogs

Recently Viewed Blogs

Untitled