Sork

[bracesork]

The second version of the silicon gag also includes an inflatable butterfly gag that can be purchased many places.

[bracesork]

Next up is a different gag in two different versions. It is based on 3 mm silicon rubber sheets that are very easy to work with using a knife or scissors. A rectangular hole punch is also helpful. Three layers of this material bent over makes a 18 mm thick springy wedge that fits well into the mouth.

[bracesork]

The muzzle gag can be extended with a chin and neck piece and held in place with more lockable straps as in this picture.

[bracesork]

The classical muzzle or panel gag with lots of straps is an eternal favorite of mine. You can see a nice brown plastic version of this earlier in this blog. Here is my red latex version with the small breath through latex bladder gag.

[bracesork]

A very red version of the inflatable gag bondage hood combo.

[bracesork]

In a more complete bondage outfit the inflatable gag is attached to a latex hood. Here is a black version of this restrictive assembly.

[bracesork]

The larger latex bladder in this gag is here inflated to a rounder shape with the bulb.

Adding an inflation bulb to the simple panel gag makes it more devious. However, for most purposes the simple fixed size gag is perfectly adequate. The large latex tube forces the mout open and the soft bladder fills most of the mouth cavity.

[bracesork]

A lockable panel gag with a small fixed size mouth piece.

A simple version of the gag would use just the mouth piece attached to a face panel that is secured to the head with a strap, preferably lockable. The next image shows such a device with the smaller gag. This would work very well inside David’s bondage suits. A small but important detail could be seen in the first image, the straps are attached to the panel at a slight angle to fit the tapering contour of the lower face.

[bracesork]

Large gag to the left, smaller one to the right.

[bracesork]

I made the gag in two sizes based on two different molds that are actually air filters or humidifiers with a suitable size and shape for the purpose. These are dipped about ten times in liquid latex to create a latex bladder that can be peeled off and used in the gags.

The next image shows the two sized casts both in the raw and partially finished. The large version goes on top of the latex tube, while the smaller one has one side inside the tube and the other outside it. Liquid latex is used to glue the casts to the tube.

The finished version to the left is ready to be incorperated in a complete gag. It can be used as is or in a version with a small tube attached for added inflation. The bladder can also be permanently expanded by injecting air into it with a hypodermic needle and a large syringe.

[bracesork]

Tools and materials for the gag. The bladders are made by dipping the plastic filter on the wooden stick repeatedly in liquid latex.

[bracesork]

I love the orange bondage suits created by the artist Davig Page. The fortunate victim is immobilized in a cramped space, blindfolded although vision inside the suit obviously is limited, with arms bound behind her back. What is sorely missing though is a gag preventing unwanted sounds from the restless person so confined. What would be better for this purpose than the wonderful device shown in the photographs from Ian Rath. An inflatable, breathe-through latex gag is just the thing needed here. As I was unable to find a source for this device I decided to make my own from scratch.

The core of the gag is a thickwalled one inch latex tube to which a thin airfilled latex bladder is glued. If required, a thin tube can be added to further inflate the bladder. The first picture shows some of the tools and materials I used to create my gag.

[staydiapered-deactivated2025012]

My friend let me wear their romper, it’s prettttttttty :) I really like these, I’m a side-sleeper which makes it difficult to find solutions for nighttime accidents. Leaking can be really upsetting, there’s nothing fun about stripping your bed in the middle of the night, alone, and sleeping on the couch for the rest of the night. Even with plastic sheets, you still need to do the the diapergirl walk of shame laundry the next morning. Unfortunately it’s a bit warm to sleep in, it’s much better for playtime or naps. Once the velcro closes across the top you can start to feel really little and secure, sometimes it takes a little extra protection.

The romper is best used for cloth, in the first few pictures I’m wearing a Japanese style diaper cover with two cloth pre-folds as inserts, plenty of comfiness and waddle factor. The combination of a impractically bulky diaper and the very baby-ish romper made me feel very safe and snuzzly, I wasn’t able to do much but cuddle, purr and wet myself.

In the last two diaper pictures i’m wearing a Bambino with ABUniverse cloth-covered plastic pants, I’m not sure if they make them anymore. The last picture is my tiny, tiny bottom in a pair of big girl undies, to simply show how thick my nappies are.<3

Happy Sunday, Big Hugs & Stay Diapered <3

[bracesork]

I love this too! Great for sleeping in :]

Get your own from eBay for about $15: Adult Baby PVC Onesie #P008-6

[bdsm-femdom]

[restrained4ever]

Wer weiß wo das ist?

Where is this? Who can tell more?!?

[bracesork]

Target Acquisition by artist David Page

[apebit-deactivated20190220]

[strappyskink-deactivated2016062]

You all are going to suffocate breathing in each others stinky sweaty rubber crotches. Enjoy. Those suits are nice and tight to prevent any of you squirming and getting away.

[bracesork]

CampX by artist David Page. Yes, there are bound girls inside!

[restrained4ever]

Waiting for the next patient!

[maurisegufix]

#woow2

[bracesork]

I want one of those...