Brick Clean London

Pebble dash, paint Removal Services

[brickcleanlondon]

The Crucial Service of Exterior Brick Cleaning How many times do we walk down the street and find extremely dirty brick facades? This is very common to find in many buildings in the city, we see the blackened, whitish, eroded by rain ... but the question is, how can you clean bricks from a wall?In this post, we are going to tell you to step by step how you can carry out a brick cleaning and what are the tools you need to do it. The only things you need first are tools like a metal brush, nylon-bristled or stiff-bristled brush, a bucket, a brush, a spatula and a hose. What are the steps to follow to clean bricks? When it comes to cleaning bricks, be it a facade or a surface, it is necessary to have the elements that we have mentioned above. Once we get them we have to buy muriatic acid and a product to waterproof the wall. Before we get started, if you are looking for an excellent brick cleaning service in south London, look no further than brickcleanlondon.co.uk.When we have everything ready, let's get started! STEP 1: How to start brick cleaning?Initially, it is advisable to sweep the bricks with a broom over the entire wall or surface, insisting on each of your bricks. With this procedure, we will be able to eliminate dust and cobwebs from the wall or surface. STEP 2: Scraping process to clean brick surfacesTo continue cleaning, we have to scratch the brick before wetting it or applying any product. We have to carry out this process with the metal brush, since having the hardest bristles, it will allow us to drag the dirt better. We must rub over all those areas that are stained to remove them later.It is very important that we do not use the metal brush with a wet surface, as we could damage or scratch it if we rub too hard. STEP 3: Identify the type of stainOnce we scrape the surface, we have to proceed to clean the brick from the wall or floor we are working on. Before using any product, it is important that we identify the origin of the stains, since depending on where it comes from, we will act in a certain way. TYPES OF STAINS: ●  White spots: These types of spots are usually the most common. To eliminate them we will use vinegar since it is one of the most natural and efficient elements to be able to eliminate these stains. To get rid of these white stains, it is necessary to moisten the surface slightly with a cloth soaked in vinegar. After applying it, we must let it rest and when a time passes we proceed to add water. In the event that the stains have not been removed, the process can be repeated. ●  Grease stains: To get rid of this type of stain, we must dilute washing powder in water and with a splash of detergent to wash dishes. These two products together are good at removing these types of stains. With the help of a stiff bristle brush, we must rub over the stains making circles and let the mixture act for a few minutes. Then we proceed to its rinsing, which we can carry out with a hose or pressurized water gun. ●  Saline efflorescence stains: To eliminate this type of stain, we must use muriatic acid diluted in water. We must add more water than the product since it is quite corrosive. To apply it, we will use a stiff bristle brush and rub over the surface. We will let the mixture rest for a while and then we will rinse it. ●  Mould stains: To remove mould stains we will need to make a mixture of bleach and warm water. As in the previous one, we must apply a greater proportion of water than chlorine. With the hands protected with gloves, we will apply the diluted on the surface and we will rub until we manage to remove the stain. Then we will let the wall rest and then we will clarify them with the help of a hose. ●  Paint stains: When it comes to removing this type of paint stain, we have to take into account that we need to use muriatic acid diluted in water. Once we have this mixture, before applying the product on the surface, we must scrape the paint from the wall until we can remove it. After this step, we apply the muriatic acid diluted in water with a stiff bristle brush and rub it on the part that is stained. We let it dry and then we rinse it with pressurized water. STEP 4: Rinse in brick cleaningAs we have been able to explain in the previous step, to clean the bricks efficiently, we must let the mixture that we apply rest and then rinse it with water.Once the brick is dry and the surface is clean, it is advisable to waterproof the wall with a special product. What this product will do is repel any type of stain to which the surface is subjected. To be able to apply it evenly, you will have to help yourself with a brush. If you have any of these types of stains on the facade of your home and you consider that it is time to clean the bricks, do not hesitate to contact us. We will be delighted to help you.

[brickcleanlondon]

A Guide to Restoration of Old Brick Walls Brick walls are the perfect accent to add character to your décor, no matter what your style is. These walls have the benefit of not going out of style, but they can lose their beauty if they are not cared for properly. If in your house you have brick walls that have seen better days, you are still in time to save them, just follow these tips: How to clean brick walls Brick walls are not difficult to clean, but this task takes time. If you want to save work, use a pressure washer. These machines can be rented at stores like Home Depot or Lowe’s for a day or a few hours, and they leave the brick walls looking like new. Keep in mind that there will be a lot of water in the space, and you must protect other surfaces. Use boats to collect the falling water. If you have carpet or wood floors, or old or damaged brick walls, you won't be able to use this method. More tips in Types of floors The other option for cleaning brick walls is with a brush and water. You don't need any special cleaners, but you do need to take your time brushing and scrubbing gently in circles to remove all layers of dust and dirt. If the walls still look dark and lifeless, mix a few drops of dish soap in the water. A common cleaner used for this surface is soap and salt. Mix one ounce of dish soap with one ounce of table salt. Create a paste and add water until the paste turns into a cream. Apply this cream to the brick wall with a cloth and let it sit for 10 minutes. Then use a brush to clean the surface and water to wash it. Restoring the mortar and brick If the mortar on the wall has holes or is damaged, your best bet is to cover it with a new coat. Mix the mortar according to the instructions and then carefully apply it where you need it. If instead of the mortar the brick is damaged, you can only replace it. You will need to drill the mortar around each broken brick and remove it in one piece. In many cases, you can use the same brick, and just flip it over to show the undamaged side. If not, buy a brick of the same size and colour and put it in water before installing it on the wall. Add new mortar around it and position the brick. Protect the surface In order for the brick to look its best, you should protect it with a layer of special sealer for this surface. You can find this in renovation stores, and apply it with a paint sprayer or brush. Don't use a glitter sealer as it will make the wall look unnatural. Painting brick Brick walls can also be painted, although this often detracts from character. Remember that if you decide to paint them, it will be very fun to go back to the original brick, so I recommend you choose a neutral paint colour or simply leave them natural. An excellent Brick Restoration service located in London can be found brickcleanlondon.co.uk.

[brickcleanlondon]

Brick Cleaning or Brick Restoration: What's the Difference? Over time the structures made of brick may start to show the signs of ageing. That can happen for various reasons. Even the best quality bricks require a makeover or restoration now and then so that they do not start deteriorating at the end giving rise to crumbling and other forms of destruction. Some of the main triggering factors that call in for brick restoration are mentioned below: ●  Environment and the underlying weather (for instance rainy weather is one of the most sought after issues that demand brick restoration). ●  Wear and tear (starts happening naturally over the period) ●  The overlying weight of construction affects bricks that are placed below. ●  Ground shifting due to multiple reasons. ●  Alterations, modifications, various types of other activities that can lead to brick deterioration. Most bricks need to be restored, given the fact that they start deteriorating at their joints after a given amount of time. Brick joints are known to be made of liquid mortar that hardens over time and holds everything in place. But as it ages and many factors affect it, there can be issues like water seeping that promotes the actual need for brick restoration. At the very first signs of crumbling or missing mortar, brick restoration service providers are to be called for. Let's now talk about brick cleaning The surface of bricks is known to be rough as well as porous. This is an ideal state to hold in dirt, pollutants and grime. All of these factors combined can cause a lack of lustre that was originally on the bricks. Also, a high-pressure power starts building on the bricks. This is where brick cleaning becomes inevitable. There are quite some methods for effective brick cleaning. From high-pressure washing to clean the bricks with suitable chemicals, there are endless possibilities to bring back the lost lustre and durability to your bricks. You can also opt for professional brick cleaning services London, for the best available services that help you retain your bricks performance even after years of its inception. The process of keeping bricks healthy includes both cleaning and restoring. For ensuring some mode of immortality to the gorgeous bricks, keep the circle going which includes the need to clean and restore.

[brickcleanlondon]

Types of Cladding and Removal Techniques There is no doubt that the first impression you have of a building is the most important since it will be the one that will generate the first impressions. Here the facade plays a leading role as it is the first thing that enters your eyes, so it is worth paying special attention to it, as it will have a lot to say. And in addition to the aesthetic part, the cladding of your facade will be essential to protect the building from meteorological phenomena and to achieve the best thermal insulation in homes. For this reason, we have believed that it would be interesting to make a post in which we talked about the different types of facade cladding and the most used materials since it will depend on them if you get it right. There are many different materials that can be used in the cladding of a facade, being able to choose between wood, stone, stucco, metal and a long etcetera that will depend both on the conditions of each building and on the tastes of each person or builder. Depending on the material chosen, an architectural style or another will be achieved, which will adapt to a greater or lesser extent to what you are looking for, so pay attention and take note. Metal Metal is one of the most used materials in facade cladding, especially in those old buildings that seek rehabilitation of the exterior with the intention of offering a more modern and current image. The possibilities to choose from are enormous, being able to choose between different options that will allow you to enjoy the desired look. It is a widely used material, especially in ventilated facades. Natural stone cladding Natural stone is shown as a safe bet for those homes that seek a classic and elegant style, offering a plus of distinction and superior quality than other materials can offer. Within natural stone, there are different materials to choose from; granite, marble, slate, etc., the choice of which will depend on the image to be transmitted as well as the conditions of each building. Brick cladding Brick cladding is another of the materials that are being used the most today because it offers a wonderful appearance. It also gets a very realistic look that adjusts without problem to both your tastes and your needs. Wood or timber Wood is a material that is becoming more and more common in the cladding of exterior facades due to the fact that it offers enormous versatility, adapting without problem to both the most traditional and contemporary styles, also offering simplicity and warmth that allows you to differentiate yourself from the rest. Of course, wood is a material that is especially susceptible to meteorological phenomena, so it is important to find the right type of wood. Stucco Stucco is possibly the material that we find most in conventional buildings in the cities of our country. It is an economical material that offers great results and great resistance. Prepared based on sand and water, it allows them to achieve different textures and combine them with other materials to achieve a more exclusive finish. Aluminium and glass The combination of aluminium and glass offers a modern and elegant design, is widely used by those avant-garde buildings that seek innovation abroad. Aluminium structures with glass windows that offer a luminosity and a differentiating style that is being increasingly taken into account. Ceramics Ceramic is undoubtedly one of the most used materials when cladding facades throughout history. It shows a highly resistant material that offers a perfect finish, with excellent performance both technically and aesthetically. Cladding removal is also very simple, all you need is a ladder, a tool to pry of the cladding, like a crowbar, you will also need tools such as a chisel, pry bar, hammer, or power hammer chisel, depending on the type of cladding. To keep yourself safe, use a thick pair of gloves. Make sure your ladder is safely placed and simply pry off the cladding.

[brickcleanlondon]

5 easy steps to follow for external brick cleaning for a better-looking home Brick cleaning is an important task when one wants a shiny house that grabs eyeballs for the right reasons. Though bricks are durable and are built to last, it too calls in for a modest deal of occasional maintenance. Often dust, grime or even the harsh weather can leave brutal scars of damage on the prettiest of bricks. But worry no more as, with the proper external brick cleaning, you will always be able to retain that classy shine of your bricks for years to come. You can also easily opt for professional brick cleaning service that leaves your bricks flawless and full of lustre. Here are five steps for the best tricks to effectively clean bricks: ●    Choose the right solution : Not all bricks are the same. This very fact makes it more important that choose the solution for cleaning even more wisely. Half of the work is accomplished by opting for the right Exterior brick cleaner as not only do they help clean but also help preserve the bricks. ●    Protect the area surrounding the bricks : The best way to clean bricks is not just about taking care of the bricks. It also includes taking care of the surrounding areas as the glossier the brick, the more does it grab attention towards itself alongside it's surrounding areas. From choosing the right chemicals to placing a tarp or plastic sheet over the bricks, there are multiple ways via which the surrounding areas can be taken care of ●   Brick absorption rate : Various bricks come along with a varied range of porosity that makes the absorption differently for different substances. For effective and smart cleaning of the bricks and also for pressure washing bricks, knowing the brick absorption rate is very essential. ●   Saturation with water :When it comes to cleaning brickwork to perfection, saturating them with water beforehand is a must. ●    Prevent streaking : There are various surfaces that may require brick cleaning. For instance, cleaning fireplace brick is quite a common ordeal given the popularity of this home decor. Saturation helped prevent streaking and gives a smooth finish to the cleaning.

[brickcleanlondon]

Exterior Brick Cleaning: How it works?

Regular brick cleaning is an important task every homeowner should periodically partake in. Though bricks are durable and made to last, dirt, grease and grime over time can steal the lustre of your home’s brick exterior, especially if it features classic brick. The need for occasional maintenance is pretty real and they require quite a different sort of attention when it comes to cleaning. One can always choose to opt for Brick Cleaning Service to get some professional help in getting those bricks to shine to perfection and restore one's house to the original charm.

Steps as to how the process of brick cleaning works:

●   Choose the right brick cleaning solution: The first step to having a proper Exterior Brick Clean Process is to choose a proper cleaning solution. Not all brick cleaning solutions have the same effect and hence the solution's brick cleaning effectively must be checked before putting to use. For those that do not wish to have to deal with the harsh chemicals themselves, they can always opt for a natural option or for professional help in Brick Cleaning.

●   Protect the area surrounding the brick : Brick cleaning solutions come inclusive of harmful solvents and acids that can cause immense damage to plant life. Even an acid as mild as vinegar can result in being disastrous. Brick cleaning solutions and solvents for grime on your brick can even react differently to the other surfaces or windows on your home, so protect the area surrounding and follow the process to Brick Restore, by placing a tarp or plastic and protect non-brick surfaces as best as you can.

●   Test brick abortion rate : Bricks can be more porous than other surfaces and hence can react to a plethora of cleaning solvents. One of the most important rules in case of Exterior Brick Clean Process is not to lose the natural colour unintentionally while trying to clean bricks.

●   Apply the solution, clean and fine thoroughly: After applying the cleaning solution to your saturated area of bricks, scrub, power wash, or hose down to clean it and end it up by rinsing thoroughly.

Brick Clean London are professionals in handling homes with external bricks, especially vintage homes that have a great history behind them. They have over 50 years of brick restoration expertise to back them. Some tasks, especially concerning centuries of heritage, should best be left to experts. Check out their website http://www.brickcleanlondon.co.uk/ for more information.

[brickcleanlondon]

Easy Brick Care & Maintenance tips for your Home 

Bricks make a house. These have been in use since times immemorial. Often with time and a perhaps neglect, they lose their initial charm and beauty. Bricks get covered with black sooth and their initial beauty is often forgotten. Especially if the homes are old and constructed several decades ago, they will survive the wear and tear of the weather conditions for many more years to come with regular brick restoration in London.

You can either hire a brick cleaning company in London such as Brick Clean London or you could look at some of the below methods that will help you in keeping the bricks of your home good as new.

●  Water damage? Keep it at bay: The first step to healthy, flawless bricks is to keep a keen eye on the water damage. The damage caused by rain that seeps in through minor cracks is the greatest threat to bricks. To maintain the integrity of the structure and to protect the bricks, repainting, and even changing the damaged mortar remains a must. There are expert brick repointing companies in London who would happily do this for you leaving your home looking good as new.

●  Routine brick cleaning is brick healing: With a simple solution of bleach and water, bricks can be cleaned to perfection. Scrub the solution and once you're done, a pressure washer can be used to clean up the whole thing. The acid-based cleaner is also another great option. Cleaning bricks on a regular basis helps in retaining the aesthetic appeal of the bricks, lowers the frequent necessity of mortar repair to an extent, ensures the bricks are kept in check for water damage and repair, and prevents mortar decay.

●  Adieu Efflorescence for once and for all Efflorescence is referred to as the white powder or crystal substance that is often noticed on bricks when they are left without care for quite some time. It is formed as a result of natural salt deposits which is left behind by water as it finds its exit through pores. Though water can remove these whitish stains for quite some time, they have a tendency of reappearing. The solution? A stiff brush can be used to forcibly clean away the deposits and prevent a re-emergence. Sandblasting can also be considered. The right amount of minimal care can take away a mindful of worries.

[brickcleanlondon]

Paint Removal - What needs to be done?

Introduction Not to burst your bubble but painting brickwork does not save your building from damages. It's contrary to what you've known and were told. The paints seal in water particles which make them damp. This will eventually percolate deep into the interiors and damage them. Also, paint does not make the brickwork look attractive, trust me! If you are planning to remove those flaky paints from the walls of your house, this article will guide you through. Paint Removal is not easy, and you need to have a basic knowledge about it. So, keep reading.   Preparations for paint removal Before removing paint from your walls, you must follow these:

●  Wear thick and protective gloves, not the ones you use for household washing purpose.

●   Wear long-sleeved dresses and long pants.

●   Do not wear sandals.

●   Do not, at any cost, get paint stripper on your hands.

●   Cover your eyes with glasses and goggles.

It is advisable not to carry out paint removal if you do not have the proficiency or least knowledge about it. Contact service providers related to brick paint removal london who can further help you out.

After you are done with the instructions as mentioned earlier, follow these:

●   Spread dust sheets or old newspapers on the furniture and floor.

●   Keep your children and your pets away from the area of paint stripping.

How to remove paint?

●   Start your paint removal process with an old paintbrush.

●   Apply a coating of paint stripper on the wall from where you want to remove the paint. Leave that for a while.

●   Using a shave hook, paint stripper or a knife, scrape off the paint from the walls.

●   It is strictly advised not to use a power washer if you are already using a paint stripper to remove paint.

●  After the paint has been removed, clean the area with paint thinners or cold water. This will neutralise the chemicals that are left behind by the paint stripper.

You can contact paint removal company London and wave off the worries and burdens off yourself from following these rules all by yourself. It is always recommended to hire a group of professionals, but if you are trying to experiment, well.

Conclusion For paint removal, you can also use a power washer, a sandblasting or shot blasting, a needle gun and a wire bristle brush, especially when you are stripping exterior wall coatings. You can also contact Paint Removal London service providers. That's more convenient!

[brickcleanlondon]

What are Exterior Wall Coatings? What benefits do they offer?

Exterior wall coatings can be often classified as elastomeric (wall coatings), masonry coatings, textured coatings, liquid vinyl siding and, of course, exterior wall "coverings."

These are built to mimic ordinary house paint, but not found in conventional paints with advanced features. Such features that include colorfastness, waterproofing, anti-carbonation, anti-humidity, but the fact that they are built to over last masonry paint several times over is a common feature to all. Typical exterior wall painting has the dual benefits of being both decorative and defensive, and in terms of lifetime and durability stands apart from the masonry paint scheme. Although painting your house's exterior walls with masonry paint can well make it look good, this function will last at best just a few years before the paint begins to degrade.

Long-life for Walls

The biggest benefit of having an exterior wall cover added to your home is that it will not only look aesthetically appealing as per paint but will continue to look good for at least two decades.

To uphold that fact, most reputable exterior wall coating companies offer a consumer warranty.

The warranties offered to vary in length but normally the warranty protects the end-user from flaking, fading, cracking or peeling of the coating.

Enhanced wall coating product durability and longevity are attributed to the fact that wall coatings are based on hard-wearing flexible resins to bind the different elements of the mix.

Helps Avoid Damp Walls

Wall coatings avoid the entry of humidity and water into the building due to the extremely hydrophobic water dispersants used in its manufacture. It means that, if applied correctly to a damp building, a textured exterior wall covering can allow any moisture found inside the building's surface to evaporate harmlessly thus preventing more humidity from entering.

Self-cleaning

Typical wall coverings rarely pick up dirt as maçonnery paint does, but their water repellent characteristics allow rainwater to wash away any dirt particles naturally and without concern. Further cleaning can be done manually with a garden hose spray if necessary.

Exterior wall coatings are like a life-long investment that once done, would keep giving you benefits for decades.

[brickcleanlondon]

A simple guide for the paint removal Process

Historical edifices are beautifully crafted with intricate work on them. Paints are used by many to smooth out the surface built of bricks or beautification of the designs. But at some point in time the paint needs to be removed. This may be done for a variety of reasons like for creating a better- and high-quality painted surface with brilliant shine, new paint can stick better, if the old one is removed properly. Regular maintenance of buildings also involves paint removal as a process. Paint removal can be needed for home improvement purposes too. Paint removal can help restore the building into its original condition. Professional workers are needed for services of paint removal. Expert handling is needed to make sure that the original structure of the building is not damaged in any way. Process and precautions of paint removal Paint removal process in buildings, especially historical structures, has been an expensive one in the past and continues to be the same now. It costs a lot can still result in some or other kind of damage. Extreme precautions are required in the process of paint removal as it can lead to regrettable consequences. Longer time frames and labour is a prerequisite for any paint removal process. Large areas of buildings would need professional expertise. Qualifies professional and experts must take up the task to avoid any kind of damage. Prepping the wall is also a must. All the hangings, decorative and frames shall be removed before the work is started. Many methods are used to remove the paint from the walls. It includes scraping, stripping, heating and use of sand. Moderate to firm pressure should be applied in every direction over the paint until the wall is clean. You can heat a portion of the paint and then scrape off the paint from that area. This will ease up your muscle power use. You must wear a mask to protect yourself from inhaling fumes lastly, clean the wall with cool water. Use a wet sponge to do it and wipe the wall, then let it dry.

[brickcleanlondon]

Everything you need to know about Meningitis vaccination

Meningitis is a dangerous disease as it affects membranes of the brain and the spinal cord. The disease is caused by viral and bacterial infections. Meninges are three membranes that cover the brain and the spinal cord. The inflammation of meninges is called Meningitis. The first few symptoms include fever with headache, vomiting, rashes, disliking lights, confusion, cold hands and neck stiffness. It often affects small children, teens and young adults. If not treated quickly, it can result in permanent damage to the brain and nerves. Meningitis is contagious and can spread through sharing of utensils, sneezing or coughing. This disease can be prevented through vaccination. If you are travelling, you are at a higher risk of getting meningitis especially if you are not vaccinated. Travel vaccinations at Thornton Heath can be availed at www.bidschemist.co.uk. Meningitis B vaccine can be administered to 8 week old babies with a second dose at 16 weeks and a booster dose at 1 years of age. This vaccine protects against meningococcal group B bacteria, commonly seen in young children in the UK. Meningitis ACWY vaccine is given to teens and fresher students heading out to university for the first time. Meningococcal groups A, C, W and Y are four types of bacteria that cause meningitis. Vaccinating your young teen children with meningitis ACWY vaccines will protect them greatly. Pneumococcal vaccines, Hib/MenC vaccine, 6-in-1 vaccine offer protection against a few causes of meningitis. If meningitis is caused by a bacterial infection (usually rare) it is more severe and the treatment lasts for about a week in the hospital. Intravenous antibiotics are administered along with other fluids and an oxygen mask has to be worn. If the meningitis has been caused due to a viral infection, then the treatment is not so severe. Anti-sickness medicines and painkillers help in providing relief, meanwhile the patient recovers in 7 to 10 days. Cefotaxime or Ampicillin are effective antibiotics against Meningitis, but should be taken only after proper consultation from your doctor or GP. Bids Chemist in Norbury, UK, is a travel clinic and are experts in travel vaccinations. The pharmacy has the necessary information regarding all vaccines and can even help you administer them with the help of able doctors. You can schedule an appointment online with just a few clicks at https://www.bidschemist.co.uk/. Croydon, Streatham Vale and Thornton Heath can access Bids Chemist with ease. If you are travelling abroad or have a new born child, vaccination against deadly diseases such as meningitis is the only available option and must be availed by all to minimise sufferings and also the spread of diseases.  

[brickcleanlondon]

What is the process of Brick Restoration?

In today’s modern world where you can reach the Moon and Mars and find the cure to the most complex diseases, repairing a broken brick may not seem like much, but it’s a wonder in itself. This wonder is causing the architecture of Great Britain to be preserved and retained in its original glory. This process is mostly seen in Britain due to the fact that most of the classic architecture belongs to the UK. We still see buildings from the Victorian, Georgian and Edwardian times, which require repairs and restoration due to damage incurred from weather conditions. The process followed is quite straightforward. The damaged brick is sent to a lab to identify the original contents used to create it. The mortar is recreated with a similar colour and the broken parts of the brick are rebuilt. Most often than not brick restoration experts find that the buildings have been painted with modern paints or mortar has been used that does not match the original mortar which is the main cause of all of their problems. In this case, the original paints need to be removed and then the process of brick restoration is initiated. Restoring bricks also includes removal of any other substances such as algae, debris, soot, etc from the brick facade. The use of harsh abrasives and excessive use of water is strictly prohibited. Using cement based products instead of the original lime mortar is considered to be the most damaging of all practices and the experts strictly advise against it. Traditional tools and natural materials used while making the old brick is taken into consideration while carrying out the brick restoration. Sometimes the extent of brick damage is revealed when the property is set up for brickwork cleaning. Just by the removal of the soot and dirt the amount of damage can be evident. Most experts admit that while carrying out the brick restoration it is extremely important to ensure that the bricks breathe after they are restored or it can cause additional problems like dampness if not done correctly. A brick restored house often looks more attractive and is of great value on the market than one that has issues of broken, unkempt bricks. Brick Pointing is a part of the brick restoration and though considered expensive is vital for the longevity of the property. In the process of brick pointing the damaged bricks are “racked out” and restored with original matching brick.

[brickcleanlondon]

What Are The Benefits Of Home Improvement Services? Introduction Home is undoubtedly the best place in our lives. In all times of life, we can think of only one place of solace, that is our home and like all other things, home needs improvement as well. There are several methods devised which can pose as home improvements methods. There are Home Improvement Services which provides ideas and help to enhance the beauty and usability of a house. There are several types of home improvement. Some of them involve breaking the whole house down while some of them refurbish a particular area of a house. Benefits of Home Improvement Services Home improvement is an outstanding service which is needed by many. Some of the benefits of such services are: 1. The comfort of the house can be enhanced. It can be made more appealing and comfortable for the residents. 2. The usability of the structure can be enhanced in a manner so that the maximum usage of the space can be done. 3. The improved version of the house can be made efficient in terms of energy usage. The house can be made ecologically sustainable. 4. The maintenance of the house can be made more accessible. Brick cleaning services in South London can help you with the maintenance. 5. The space of the house can be used more optimally by converting attics or useless space into rooms. Extensions or loft conversions can be the solutions. 6. The value of the house can be increased by home improvement. The resale value of the house also increases. 7. The structure and appearance of the house can be modernized in a way to suit the latest trends Hence, home improvement is an exciting process. It changes the face and fate of a house; so do hire an expert and get your house an improved look today!

[brickcleanlondon]

Masonry Restoration Services By Brick Clean London

Masonry is the art of stonework which enhances the appearance and beauty of any structure. These pieces of stonework characterize the houses in south London. That beautifies to just another level. There are examples of glorious structures being built with the art of masonry. They have stayed intact since the durability of the stones used here is very good. But, there are some drawbacks of having any masonry structure. They trap a lot of dust and also their pieces may break off, causing wear and tear. That ruins the whole appearance of the structure. That has given birth to the concept of masonry restoration. read more at https://brickcleaninglondon.blogspot.com/2020/03/masonry-restoration-services-by-brick-clean-london.html

[brickcleanlondon]

How to remove dried paint from bricks?

When dealing with brick cleaning, the toughest part is removing dried paint from brick and getting out the last bits that stubbornly stick in the crevices. There are brick cleaners available for removing paint, but only a few basic methods. The method you will incorporate to remove dried paint from brick will depend on the type of paint and how much elbow grease you're willing to invest. 1. Using a scraper blade Simply scrap it off is the most common way to remove paint from your wall. Before you start, lay a cloth on the floor below the space on which you will work so that the removed paint flakes can be removed easily later. To remove any loose paint or dirt before scraping, wipe the concrete wall with a smooth cloth. Then wipe the concrete wall with a tissue before scraping to remove any loose paint or dirt. It will cut through any loose chips, making them fall from the wall. Keep following this procedure in each direction. 2. Use paint stripping agents Brick clean specialists use few chemicals for paint removal.  These chemicals are two primary kinds: caustic-based strippers (CBS) and solvent-based strippers (SBS).Using chemicals properly is the fastest and simplest way to remove paint. First, the stripper softens the painted surface, which can then be scraped off readily or washed away with water. 3. Use heat application Heat is also a popular way to remove paint from concrete. Make sure you cover your floor before starting the process, as stated in the first technique. To ensure a chemical-free wall surface to work on, wash the wall with clean water in this case. Then take your heat gun to a safe place to heat up. Once the weapon heats up, point it to the wall and maintain it away from it about 5 inches. Heat the surface of the wall until the paint begins bubbling. When it begins bubbling, you will need to scrape away the paint. The cloth on the ground will ensure a simple removal of lead paint.

[brickcleanlondon]

Paint removal technique from the Outer Wall

Paint removal technique Many think that once they paint a concrete wall, then the paint can never be removed again. Luckily, this is ...

[brickcleanlondon]

Paint removal technique from the Outer Wall

Many think that once they paint a concrete wall, then the paint can never be removed again. Luckily, this is not the case, since there are many cheap ways of exterior paint removal. This allows room for remodelling, since you may decide to change the colour of a specific room or to simply remove the wall paint and leave that room as it is. A number of cheap and easy-to-follow techniques offered by brick clean specialists can be taken if you need to leave your concrete walls to appear as if they never had any paint on them. Here are some alternatives to consider.

1. Scrape it Off It is the most popular way to remove paint from your wall is by simply scraping it off. Before beginning, lay a cloth on the floor beneath the space you will be working on so that the removed flakes of paint can be readily removed later on. Then wipe the concrete wall with a soft clean cloth to remove any loose paint or dirt before scraping. Place the scraper blade against the wall and start pushing it under any cracked paint. It will cut through any loose chips, making them fall from the wall. Keep following this procedure in each direction.

2. Paint Stripping Agents Brick clean specialists use few chemicals for paint removal. There are two main types of these sort of chemicals: caustic-based strippers (CBS) and solvent-based strippers (SBS). The proper use of chemicals is the quickest and easiest way to remove paint. The stripper first softens the painted surface, which can then be easily scraped off or wiped away with water.

3. Heat Application Heat is also a popular way to remove paint from concrete. As mentioned in the first method, make sure you cover your floor before beginning the process. In this case, wash the wall with clean water to ensure a chemical-free wall surface to work on. Then bring your heat gun, providing it time to heat up in a safe place. Once the gun heats up, point it at the wall and keep it around 5 inches away from it. Heat the wall’s surface until the paint starts to bubble. You will require to scrape away the paint when it begins bubbling. The cloth on the floor will make sure that you have an easy lead paint removal.