#extradirty
Peter Solarz
Sade Olutola
blake kathryn
Alisa U Zemlji Chuda
i don't do bad sauce passes
Andulka
No title available
Origami Around
🪼
we're not kids anymore.
No title available
Product Placement
art blog(derogatory)
PUT YOUR BEARD IN MY MOUTH
"I'm Dorothy Gale from Kansas"
Kaledo Art
❣ Chile in a Photography ❣
will byers stan first human second
Kiana Khansmith
seen from Germany
seen from United Kingdom
seen from Brazil
seen from Malaysia
seen from Türkiye
seen from Germany
seen from United Kingdom
seen from United States
seen from United States
seen from China
seen from Germany
seen from Netherlands
seen from United States
seen from Malaysia
seen from United States
seen from Germany
seen from Germany
seen from Canada
seen from United States
seen from United Kingdom
@lilah350
SDFGHJK OK SO. I was doing some research on like asking cosplayers for pictures, and sadly a lot of what came up were stories about cosplayers not being treated respectfully at conventions! which made me sad! so. HERE!… are just some helpful tips i think are worth sharing when it comes to asking cosplayers for pics! give love to all cosplayers!!! let them know how much you appreciate what they do!! 💖💖💖
Materials
Eva foam (4mm and 6mm) from tntcosplaysupply.com
Contact Cement from Amazon
Plastic Dip from Home Depot
Spray Paint from Home Depot
Scissors from 99¢ store
Rotary Tool from Amazon
Time and patience
"Hey Homeboy!" #bulma #bulmacosplay #plussizecosplayer #dragonballz #dragonballzcosplay #afrobulma #afrobulmacosplay https://www.instagram.com/lilah350/p/BunPPOYDjZL/?utm_source=ig_tumblr_share&igshid=61x0fn7mj8vm
Yo. Here I made a basic mask using KamuiCosplay template [5$ Comes with 9 other designs.]
Download our EVA foam masks and ears pattern collection. 10 different designs. All super fun and esy to make. Perfect for many cosplay costu
Its my first time and I was afraid my face was too fat for it but it fixes great. I even put it on my 11 year old niece and fix her too.
I used 4 mm foam from TNTcosplaysupply [10$ comes in a roll 24″ wide by 60″ long] The foam took a week to be delivered.
What is EVA Foam? Ethylene-Vinyl Acetate (EVA) is a closed cell foam. It is often used in floor and exercise mats, sports equipment, cr
Other items you can use are exacto knife or box cutter to cut the pattern out nicely and contact cement.
Put it all together and bam! Done.
Hope it helps.😊
Tutorial: Fabric Painting - Freezer Paper Stencils
I had written a basic guide for fabric painting a long time ago. But it was pretty basic and I felt like it could be more detailed and improved upon. So I made a more detailed guide on using freezer paper for fabric painting!
Keep reading
Fishwig progress, start to finish.
[More fishwig!]
Also great for a hades wig
Rose Quartz drill curl tutorial!
HELLO I thought I’d share how I do the thing. First, some things you need before you start:
Glue (and a brush to that glue)
Bendy steel wire
Comb
Toilet roll
Hairspray
Tape
Alright, first you have your section of hair you want to curl. Try to keep it as flat as possible and about this size:
Then take the wireand measure out the length of that hair
Then cover that tape (apart for a top of it which you must have later) on BOTH SIDES so it’s like a horrible sandwich. The tape is maybe 7-8 cm wide btw:
Then fasten it under the weft!
Now you take the glue and start brushing it onto the tape. This is wood-glue and it’s white before it dries, then it turns transparent when dried.
Now begins the FUN part haha no I’m kidding nothing is fun with this wig it’s a repetative fresh hell - gently lay your weft over the glued tape and make sure to gover most of it (but focus on the steel wire in the middle!)
Now you can brush on the glue on top of it! You really wanna make sure it’s covered good!
If the tape is too long like above, that’s ok! Just cut it.
Now wait a bit for it to dry a little (DO NOT START WHEN THE GLUE IS WET things can turn ugly yes this is from experience) After it’s dried a little (you can use a hairdyer if you’re impatient like me), start carefully wraping it around the toilet roll!
TADAA! And you’re done! Hairspray the little pieces standing out and fix the curl up a little and there you have it. Now repeat like 482957 times.
Wig Hacks Wednesday #1 ! Need to quickly add length to your base wig without spending time sewing rolls and rolls of wefts? Want to use the same wig for that certain character who grew out their hair after timeskip arc? (I’m looking at you, Shonen Jump characters) Here’s a quick way to add some sturdy length to your base wig, but still easy to remove if needed, using the ponytail wrap from Arda Wigs (Base wig in pic is a Jareth in Baby Pink)
- Using the duckbill clips, section off the hair where you want to add length. Unwrap the ponytail wrap’s velcro top. (You can see many rows of wefts on it which makes it volumous) - Pull the small tail side through the spaces between the elastic band on the wig - Fold in the ponytail wrap’s main side and use the little comb to secure it to the base wig - Bring the small tail side over the main side of the ponytail wrap and press down the velcro parts to secure them to one another - Comb and straighten the wig hair as needed to blend the textures - She’s ready to rock hair-over-shoulder looks!
I hope this was useful for you guys. Every Wednesday, I will be sharing wig hacks for styling, tools, products, and just whatever I find interesting to add to your wig work experience! If you don’t wanna miss these posts, go to the top of my page and change your notification settings to “see first”. I will also be putting up more video tutorials with voice-over once I get a good video camera. Any tutorial suggestions, let me know please!
Great of a Mystery girl (steven universe) cosplay
People say nothing is impossible, but I do nothing everyday.
Winnie the Pooh
DIY Wings
All of my broken umbrella have a purpose now!
I’ve gotten more than a few questions on how i made the kagune for my Tokyo ghoul cosplay and even though its actually unfinished I’ve decided to make this tutorial anyway and probably just edit it later with the updated version! SO since this is a really long ass post click the read more for the tutorial.
Keep reading
So great for a fire or water look.
[TUTORIAL] Morrigan Aensland’s Bat Wings (on the head)
Hello everyone! Today I’m posting a tutorial about how I made Morrigan Aensland’s bat wings (the little ones on the head). I did them as an experiment, because I won’t wear her classic outfit soon. The result quite satisfied me.
REMEMBER TO NOT REPOST WITHOUT PERMISSION.
IF YOU’LL USE MY TUTORIAL, PLEASE TAG ME OR QUOTE ME.
You can find me on Facebook as Hachi Cosplay or on Instagram as rebirthjourney
What you’ll need: - craft foam, or eva foaam, 2mm thick - baling wire, 4-5mm thick - baling wire, 2-3mm thick - baling wire, the thickest one you can get - drill machine - pincers - nipper - scissors and nail scissors - hot glue - paper (for the patterns) and markers/permanent markers - scotch tape - acrilic colors (for the wings: dark purple, lilac, burgundy, white and black; for the hairband: emerald green, white and black, according to the color of the wig you have) - vinyl glue with a little bit of water - two paintbrushes, a big one and a little one (for the details only) - fimo air (or another clay that hardens in air, not in oven) - newspaper sheets - a spray bottle of opaque clear varnish - headbands, a thick one
Step 1: Draw your pattern of the wings, taking inspiration from a drawing that you want to imitate. I’ve decided to refer to this one. After tracing the contours of your wings, marking the bones, cut. You could use a single pattern for both right and left wing, just as I did, or create two differents ones.
Step 2: Create the skeleton with the baling wires, imitating as much as possible your pattern. Use the pincers and the nipper. For the external base: use the 4-5mm baling wire (green one); for the internal bones: use the 2-3mm baling wire (grey one). Stick together the baling wires with hot glue, just as my picture shows, after tighten them with the tinnest baling wire you get, in order to strenghten the structure. If one wire is longer than another, cut it with pincers. If you want to be sure you did a good job, do this: before using the hot glue, attack the skeleton to the pattern, using scotch tape. It will help you to do the right amendments (moving the bailing wires in the correct position, calculating where to glue them, etc.) I recomend you to leave a little bit of baling wire out of the hot glue zone. It’s the place where you’ll insert your white claw/horn.
Step 3: Take your foam and cut some little strips, pretty long ones. These little strips will be the “skin” which cover the baling wires, the bones of your skeleton. How to calculate the length of the strings: measure the length of each baling wire (the external and the internal ones), add 2 centimeters and you’ll obtain the needed length. Example: if the green one, the external baling wire, is about 10cm long, for the little string you’ll need 10 cm + 2/3 cm. The width of the strings must be less than 1,5 cm: you risk to not cover well the baling wires, cutting extra foam for nothing. For the claw: cut a rectangle of foam – or a similiar shape – that can cover all of the glue. Leave out the baling wire I suggested to not cut off before. Wrap the strings and rectangle around the baling wires, and use some hot glue to stick them together. When the glue is cold, if you need to refine the contours, use a drill machine or nail scissors.
Step 4: Again, take your craft foam or eva foam. Put on the pattern (or patterns) that you’ve made at the beginning, and trace the contours. Draw the pattern of each wing. Cut and you have the parts you’ll glue behind the skeleton. This is the purple “skin” of your wings. Glue it behind the skeleton. Cut the excess, what you don’t need, or adjust the shape with the help of your drill machine or nail scissors (do this only once the glue is cooled down).
Step 5: For the horn/claw, take your fimo air or clay you’ve decided to use. Create a shape similiar to the Morrigan’s claw. Insert it in the extra baling wire. Mold it if needed. When the clay hardens, you won’t risk to see the claw falling down of your wings. Follow the instructions of the clay’s package, the ones that exlains the cooling process. If you feel with your fingers that the clay is still soft, let it dry again. Avoid the normal fimo, or a clay that hardens with warm, it would be hard to let it dry. I tell you this because I did this mistake, and I risked to burn down the two horns. HAHAHAHAH But with a great amount of patience, I did it anyway.
Step 6: Painting time! First of all, take a little bit of vinyl glue and add to it a drop of water. A fresh coat of vinyl glue all over the wing is ok. For the purple part of the wings, I’ve used a mixture of dark purple, lilac, burgundy, white and black. I don’t remember the exact proportions I used, because I did it intuitively, trying to recreate the colour I’ve had in my mind with many experiments. For bones and wings’ back I’ve used black colour. For the horn/claw I used white one. I suggest you to begin with the “purple part” of the wings, with a big paintbrush; then you could paint the bones, the horn and at least the back. In order to not make any mess, paint one part of the wings at a time. Two fresh coat of paint, on each part of them. Have patience and let the acrilic colour dry. When the colour has dried out perfectly, go in a open place and use your opaque clear varnish. Be fast when you’re doing this, do not focus on a single point: you risk to create unpleasant spots on the wings. Leave it dry for a night, if you can. Use your spray bottle 2 times. P.S. If you want to adjust something with the drill machine, do it before the painting process. You risk to take off the acrilic colour and do it all over again (I did this mistake ).
Step 7: In order to attack the wings to the wig, I suggest a very thick headband: it could support the weight of the wings and, mostly, of the claw. It offers more security and stability. Before this, cover the headband with papersheets and vinyl glue (it’s unnecessary if you don’t want to paint it, though). Try to mold the extra green baling wire into a solid circular shape. I’ve made it just like the picture shows. It will be the “support structure”, the connection zone between wings and hairband. Help yourself with a nipper. I’ve covered the support structure with the thinnest baling wire I had, in a really tight manner, for a major support. Then I’ve set it with more hot glue and left to harden again. Cut off the remaining bailing wire. P.S. Those cracks you see in the black part of the wing, near to the headband, were made by simply folding the foam. Folding it, the acrilic colour shatters. In my opinion this gives a more realistic effect to the wings, but you’re free to not doing so.
Step 8: Wrap the headband with paperprints and vinyl glue. First use your vinyl glue, then attack paperprints on it and, at the end, use another level of vinyl glue. Use two layers of paperprints. When everything has dried out, paint the whole headband with the colour of your wig. I’ve used a mixture of emerald green and white. I’ve tried to get closer as much as possible to my wig colour, so I suggest you to paint the headband with the wig next to you. First: colour with black acrilic paint there where the wings are sticked to the headband. Second: colour the rest with the emerald-white mixture. Do it two times, and then spray the opaque clear varnish.
And here, finally, the result!
Find me on Facebook as Hachi Cosplay or on Instagram as @ rebirthjourney
I have to remake mine. This is gonna help so much!
SEADWELLER FIN TUTORIAL
alright–ive finally gotten to it!!!!!!!
today, we will be making
cute fins!!!!!!!!!!! (that cutie is neonnebulosa ))
first– materials. you will need:
a large white(optional but easier) foam sheet, i use the medium thickness foam sheets
glue gun w glue
scissors
a pencil
string
a needle
a thin, wire headband.
and paint!
(jewelry is optional as well!!))
OKAY FIRST OFF
BAM theres your foam sheet. now fold that son of a bitch.
good, now draw your fins!
then follow your child like instincts and cut them out so you have two of each.
like so
try to cut as evenly and cleanly as possible.
now fold them and line them up in the ordered desired. then take your string and thread and start sewing them together– this is just to keep them together better! its TECHNICALLY not needed but definitely safer. try keeping the strands off to the side, itll be easier for later.
now take your glue and glue where they connect. youre gonna have to hold it in place for a bit
weeeeeeeeeeeeeee
now take your thin wire headband
and you are going to have to take a tooth pick or a thick needle to make a hole for the wire to go through to make it easier, but you need to force the wire through the area that they all join– not close to the edge but tucked as close to the fins as possible. then hot glue the edge of the fin to the headband to keep it up and perky!
aw ye
NOT DONE YET
paint those suckers grey
add markings and whatever else
add jewelry
and put them on a cute friend.
So cute
❤❤❤❤❤❤❤❤❤❤❤
👹👺⛩🌸👮🏻👍🏻👊🏼💥
👮🏻⛩🇨🇳👮🏻⛩🇨🇳👮🏻⛩🇨🇳👮🏻⛩🇨🇳👮🏻⛩🇨🇳 #chunli #chunlistreetfighter #streetfighteralpha #cop #streetfighteralpha3 #streetfighterchunli #cosplay #chunlicosplay #resting #sakuramatsuri2018 #sakuramatsuri #sakurafestival #cherryblossomfestival #streetfightercosplay #streetfighter #streetfighterchunlicosplay #chunlicosplay
🌸⛩👺👹🌸⛩👺👹🌸⛩👺👹🌸⛩👺👹🌸⛩👺👹 #akuma #Gouki #streetfighterakuma #streetfighterakumacosplay #akumacosplay #sakurakasugano #sakurakasuganocosplay #sakura #sakuracosplay #sakuramatsuri2018 #sakuramatsuri #cosplay #streetfighteralpha #streetfighteralpha3 #streetfighter #streetfightersakura #sakurastreetfighter #sakurafestival #cherryblossomfestival #flower #givingflowers #aw
👊🏼💰🤣👊🏼💰🤣👊🏼💰🤣👊🏼💰🤣 #karinkanzuki #karinstreetfighter #streetfighteralpha #streetfighteralpha3 #streetfighterkarin #karin #cosplay #thinking #karinkanzukicosplay #sakuramatsuri2018 #sakuramatsuri #sakurafestival #scenery #cherryblossomfestival #streetfightercosplay #streetfighter #snob #richgirl #streetfighterkarinkanzuki #streetfighterkarincosplay #karincosplay
