Untitled

[perrywalter338]

call of duty mobile live WTF moments

The Royal Battle is glad to announce the upcoming tournaments for all the game lovers and your wait for the tournament will surely worth as the dates for the...

[perrywalter338]

call of duty mobile live WTF moments

The Royal Battle is glad to announce the upcoming tournaments for all the game lovers and your wait for the tournament will surely worth as the dates for the...

[perrywalter338]

routerlogin.net:How to manually perform Firmware Update on your Netgear AX5700 8 stream Router?

Manually performing the update method is a bit long process but still a reliable and trusted one. In this process, the user first has to download new firmware for his router through Netgear download center and then upload it into the web interface of www.routerlogin.net. Most of the Experts recommend having an Ethernet connection while performing the manual process of Firmware Update. 

Steps to manually perform Firmware Update on Netgear AX5700 8 stream Router

First, download a new firmware version for your device from Netgear downloading Center. You might have to unzip the file as it will help the user in uploading it into the web interface of www.routerlogin.net. The extension file of firmware uses .chk or .img extension.

Now, visit the browser on your computer and navigate www.routerlogin.net on your browser. The IP address of your router can also be used as an alternative to www.routerlogin.net. Netgear Router IP address is 192.168.1.1

Press Enter and Netgear Router login page appear on the screen.

Enter “admin” as the default username and type the password you set during the Netgear Router setup on the Router password field. In case, there is no password you have set, type “password” as a default credential. Both the credential fields are case-sensitive.

Press enter and the default menu dashboard of routerlogin.net appears on the screen.

Go to the Advanced tab, select the Administration tab, then click on the Router Update tab. Router Update page displays on the screen.

Click on the Browse button and select it from where you saved it. Click on the Open button then click on the Upload button to initialize the installation process of your Router firmware.

Once a new firmware gets uploaded your router will automatically perform the reboot process. The reboot process will take a few seconds, then you can check new firmware details through the web interface of www.routerlogin.net

Note: Do not close your browser, Do not click on any other link, Do not load a new webpage, Do not Turn off your router as these all activities might bring the failure in FirmwareUpdate process.

[perrywalter338]

routerlogin.net : How to change the router password for Netgear AX6000 12 stream Router?

The router password of a Netgear Router is an important credential used to get entry into the menu dashboard of www.routerlogin.net. Without typing the password of the router, no user can enter into the web interface of your device. The first time the user interacts with the web interface of the device, he has to enter the default password on the password tab.

Steps to change the router password for Netgear AX6000 12 stream Router

Open a web browser on a computer or laptop connected to the Wi-Fi network.

Type www.routerlogin.net or 192.168.1.1 to get to the default gateway of the router. Mention “admin” on the username tab and type “password” on the password tab. Click on the login tab.

The home screen of routerlogin.net appears on the screen.

Select the “Advanced tab, click on the Administration tab, click on Set Password tab.

Set Password page displays on the screen.

Mention “Old password” on the old password field and type the new password in “Set Password” and repeat it on the “Repeat New Password” fields.

Click on the apply button and settings will get saved.

How to enable the Password Recovery option in Netgear AX6000 12 stream Router?

The Password Recovery option brings convenience to the user to login to the Netgear Router login page even after the user forgets the router password. Password Recovery option has to be enabled before performing the recovery feature as in case the user hasn’t enabled this option, no recovery process can be performed by the user.

Steps to enable Password Recovery option in Netgear AX6000 12 stream Router

Open a browser on your computer connected to your Wi-Fi.

Type www.routerlogin.net or the LAN IP address on the web address of the browser. Press Enter and Netgear Router login page appear on the screen.

Enter “admin” as the default username and type the password on the password field. Mention “password” if you haven’t set the password yet. Click on the login tab and the home screen of www.routerlogin.net appears on the screen.

Select the “Advanced” tab click on the Administration tab then click on the Set Password tab. Set Password page displays on the screen.

Now, to enable the Password recovery option, select the “Enable Password Recovery” checkbox.

Select the security questions and provide answers to them. These answers are going to be used during the recovery process. After providing answers to the security questions, the user can recover his password.

click on the Apply button and the settings will get eventually saved.

[perrywalter338]

tplinkwifi.net - TP-Link router setup and login troubleshooting steps are provided here. The user can setup and login using www.tplinkwifi.net

[perrywalter338]

call of duty mobile live WTF moments

The Royal Battle is glad to announce the upcoming tournaments for all the game lovers and your wait for the tournament will surely worth as the dates for the...

[perrywalter338]

How to update firmware for your Netgear router : routerlogin.net

Procedure to reset your router to Factory Default Settings:

Whenever we discuss about router and router login credentials we only have few things in mind that the login credentials will be the default one however some of the users prefer the make changes after they login once in the router setup page accessing the web address routerlogin.net, moreover modifying Password is the best way to secure your router from any third user or anyone else who may misuse your router credentials.

Though there are some possibilities that user don’t remember the password he has changed for the last time and in such cases we recommend you to take an action known as Reset factory default settings in order to get your router back to the default settings and steps to be followed are as ;

 In case of processing towards reset factory default settings you will see the Reset button at the back side of your router.

 With the help of any paper clip and any similar object, you need to press the reset the button and hold it for next 5–7 seconds.

 Now release the reset button and your router will reset automatically.

 And your router will restart immediately.

 Then you will find the router has successfully reset for default settings and now you can access your router with the default login credentials.

How to update firmware for your Netgear router:

Whenever any user accesses the router than on prior they need to take care of the updates available so that they don’t lack in terms of technology and software updates and in order to process the same further you need to follow the steps given below:

 You need to start with opening any web browser in your computer which is connected to the Internet connection properly.

 Than at the next step you need to enter the web address routerlogin.net and press ENTER.

 You will see the window appearing with the fields for username and password.

 Enter the username and password and click on login to enter the admin page of your router.

 Now Choose ADVANCED > then go to Administration or Settings > further click on Administration.

 You will see the option for Firmware update or Router update. Then click on Check.

 And your router will automatically start searching for new Firmware update. If your router will find any new updates or new version of firmware available than you need to click on YES.

NOTE: Make sure that you don’t interrupt the procedure of updating firmware as it may corrupt the firmware. In this case do not close the window, don’t switch off the router and do not click on any of the links given or avoid loading any new page.At last once the firmware updates are complete then your system will restart automatically and the new version of firmware will be updated properly to enhance the working of your router.

[perrywalter338]

routerlogin.net is the custom web address used for logging into the Netgear router device through which all the router/modem related options can be access.

[perrywalter338]

open your browser and type linksyssmartwifi.com in url bar then press enter. You can also sarch linksys smart wi-fi or linksys smart wifi for linksys router

[perrywalter338]

tplinkwifi.net | tplink modem setup | tplink router setup

logging into the tplink wifi router via tplinkwifi.net is easy so type tplinkwifi.net in url bar or type 192.168.1.1 and access your tplink router page.

[perrywalter338]

Open www.setup.ampedwireless.com for amped wireless setup, you can also use default ip address for amped router setup i.e 192.168.1.240

[perrywalter338]

tplinkwifi.net is website for setup your tplink router, you can also use ip 192.168.0.1 for tplink router login or search tplink router login

[perrywalter338]

linksyssmartwifi.com : How To Setup Linksys smart wifi router. open your browser and type www.linksyssmartwifi.com press enter.

[perrywalter338]

How to setup linksys smart wifi router through www.linksyssmartwifi.com? open your browser type linksys smart wi-fi press enter.

[perrywalter338]

tplinkwifi.net : How to setup TP-link Routers?

First of all, you need to use an Ethernet Cable available with the Router in order to attach the modem to the WAN port of the TP-Link Router. • Plug your Router to any Power source and turn it on with the help of Switch on the back. • As per the device you are using it can be Laptop or computer, kindly connect it to the wireless network broadcast by the Router, Please be assured the default username and password is given at the bottom of your device. • In order to access the admin login page for the router you need to open a browser and type the WEB URL — www.tplinkwifi.net in the address bar and enter. • The user can also access the admin page by typing IP address as 192.168.1.1 instead of WEB URL.

• Enter the default username and password for the router as:

User Name: admin

Password: password

• Seems like we are done with the details, please click on login to login the Router.

• Once logged in click on next to get started.

• Type the username as per your requirement in the field given below the wireless.

•  Once Network name filled, please make sure you don’t use any of your personal details as the same is visible to nearby users and devices.

• In the WPA-PSK/WPA2-PSK field, Type the new desired password for your wireless network

• Please be assured, passwords are case sensitive and you ensure to enter the strong password to make it more secure for the wireless network and difficult for hackers to hack.

• Once entered with the new password >> Click Next. >> Click Finish.

•  At last, once your password is reset, you will be disconnected automatically and you need to reconnect the Router with the new credentials.

• And now your TP-Link wireless network is setup.

In order to troubleshoot the network problems, the user can also choose to reset their router if needed.

STEPS TO RESET THE TP-LINK ROUTER:  Starting with the first step you need to use the paper clip and press the reset button mentioned at the back of the router.  Keep the Hold on the reset button for at least ten seconds.  After ten seconds release the reset button and now the TP-Link Router will restore to the factory default settings.  Once the action for Factory reset is taken it will delete all the externalize settings that include your username password, WiFi Networks, name (SSID), and security settings.

Note: Once the Restoration is processed it cannot be reversed back to the previous stage. In order to take the action for Factory Reset you can follow the 2 methods given below: Method 1 ：Hard reset/By pressing the RESET button Make sure that the Router is powered on and then press and hold the WPS/RESET button for more than 10 seconds till the time SYS LED gives a quick flash from slow flash. Once done release the button and wait for the Router to reboot to its factory default settings.

Method 2 ：By Router's Web-based Utility (management page) Move your cursor to the management page, you can also use the Factory Defaults function. Than go to System Tools -> click on Factory Defaults” page, then click on the restore button and wait for the Router to reboot to its factory default settings. Note: 1. Make sure that the router is powered on before it step towards restart completely. 2. Keep the things clear that the default user name and password is always “admin”(all lower case).

[perrywalter338]

tplinkwifi.net is website for setup your tplink router, you can also use ip 192.168.0.1 for tplink router login or search tplink router login

[perrywalter338]

linksyssmartwifi.com : How To Setup Linksys smart wifi router. open your browser and type www.linksyssmartwifi.com press enter.