*(Mpho Appellation Chiloane)*
This Technical Rider outlines the minimum technical requirements necessary for a professional performance by Quest Chillz. The Promoter agrees to provide all equipment, personnel, and conditions as specified unless prior written approval has been granted for substitutions.
## **1. AUDIO REQUIREMENTS**
### **Primary DJ Setup (Preferred)**
Quest Chillz primarily performs using industry-standard hardware. Please confirm availability at least 14 days prior to event.
- **2 x Pioneer CDJ-3000** (or equivalent high-end CDJs – CDJ-2000NXS2 acceptable)
- **1 x Pioneer DJM-900NXS2** (or DJM-A9 mixer)
- **2 x Reloop RP-8000 MK2** turntables (with Serato DVS enabled) + **1 x Reloop RMX-90 DVS** mixer
- **Minimum of 2 x high-quality XLR cables** for main outputs
- **1 x backup audio source input** (e.g., auxiliary 3.5mm or RCA) for emergency use
- **Dedicated 10A power circuit** for DJ booth (isolated from lighting and PA)
- **Stable, high-speed Wi-Fi or Ethernet connection** at booth (required for firmware updates, metadata sync, AI visuals trigger)
> *Note: Quest Chillz may bring personal USB drives (FAT32/exFAT formatted) or use Rekordbox cloud sync. Serato users must ensure DVS calibration support.*
### **Laptop-Less Performance Option (Advanced Setup)**
For select low-latency or experimental shows, Quest Chillz may perform without a laptop using optimized mobile hardware. Advance notice required (minimum 21 days).
- **Dual CDJs or Controllers** with standalone capability (e.g., Pioneer XDJ-RX3, Denon DJ Prime series)
- **USB-C or USB-A hub** with power delivery (for external SSD/HDD backup)
- **Stable power supply** with surge protection (critical for mobile rigs)
- **On-site technical liaison familiar with standalone firmware**
- *Optional:* Support for **Termux-enabled Android device integration** (via MIDI over USB or Bluetooth) for custom trigger apps – coordination required
### **Monitoring & PA System**
- **2 x Full-range PA speakers** (minimum 15”, e.g., Funktion-One, JBL PRX, RCF Evox) positioned symmetrically
- **Subwoofers** required (minimum 2 x 18”) for bass-heavy genres (Afro-Tech, Amapiano, Gqom)
- **Front-of-House (FOH) Engineer** required (provided by venue or promoter)
- **2 x Powered Monitor Wedges** (minimum 12”) placed at DJ booth, angled toward artist
- **Independent monitor mix control** accessible to artist (via aux send or digital mixer app)
- **Frequency response:** 35Hz – 20kHz, minimal distortion at high SPL
- **Sound check mandatory** (minimum 60 minutes prior to doors)
## **2. LIGHTING & VISUALS**
Quest Chillz delivers a signature **Cyberpunk x Pantsula** visual experience. Full integration preferred; minimum standards apply.
### **Lighting Requirements**
- **DMX-controlled lighting rig** with programmable channels
- **Minimum fixtures required:**
- 4 x Moving Head Beam Lights (e.g., Sharpy-style, 7R+)
- 4 x Wash Lights (RGBW LED PARs or moving washes)
- 2 x Strobe/Laser Units (safety-compliant, audience-scan permitted only with approval)
- 2 x Fog or Haze Machines (low-lying fog preferred for laser definition)
- **Lighting Console:** GrandMA3, Avolites Titan, Chamsys MagicQ, or equivalent (operator required)
- **DMX Universe Access:** Open protocol support preferred; artist may bring custom DMX controller or Art-Net interface
- **Darkened venue environment** required (minimal ambient light during performance)
### **Visual Projection (Preferred)**
- **Minimum 1 x High-Brightness Projector** (5000 lumens+, 1080p minimum)
- **Projection Surface:** Rear or front projection screen (minimum 16:9, 120” diagonal) or mapped onto architectural surfaces
- **HDMI or SDI input** at DJ booth or central control point
- **VJ Operator** required if venue provides visuals; otherwise, artist will self-trigger via AI tools
- **AI Visual Integration:** Artist uses real-time generative tools (e.g., TouchDesigner, Runway ML, p5.js) synced via MIDI or BPM detection to audio output
- Requires: HDMI out from artist device (laptop or mobile rig), stable power, and projection feed confirmation
> *Note: For holographic or 3D projection effects, consult artist management in advance.*
## **3. STAGE & BOOTH SPECIFICATIONS**
### **DJ Booth Requirements**
- **Raised platform** (minimum 60cm high) for visibility
- **Dimensions:** Minimum 2m wide x 1.2m deep
- **Robust, non-resonant table** (minimum 1.8m x 0.8m) with black tablecloth
- **Adjustable lighting** over booth (dimmable white LED, no color wash directly on decks)
- **2 x Sturdy chairs or stools** (artist + possible guest/technician)
- **Secure area** for personal belongings (lockable drawer or case space)
- **Cooling fan or AC vent** directed at booth (equipment heat management)
- **Clear sightlines** to audience and stage manager
### **Backstage & Artist Area**
- **Private green room** within 50m of stage, lockable
- **Seating for 4 persons**, mirror, adequate lighting
- **Refreshments required:**
- Still and sparkling water (minimum 6 bottles)
- Non-alcoholic beverages (energy drinks, juice)
- Light snacks (nuts, sandwiches)
- *Optional:* Premium spirits (upon request via rider addendum)
- **Wi-Fi access** in green room
- **Restroom access** nearby and private if possible
## **4. POWER REQUIREMENTS**
| Equipment | Voltage | Amperage | Notes |
|--------|--------|---------|-------|
| DJ Booth (Decks, Mixer, Laptop/Mobile Rig) | 220–240V | 10A dedicated circuit | Isolated from lighting |
| Lighting Rig | 220–240V | 32A minimum | Multiple circuits advised |
| PA & Subs | 220–240V | 32A minimum | Separate from lighting |
| Visuals (Projector, Screens) | 220–240V | 10A | Shared with booth if stable |
| Backstage | 220–240V | Standard sockets | For charging, refreshments |
> *All power must be clean, grounded, and surge-protected. Voltage stabilizers required in areas with unstable supply.*
## **5. TECHNICAL PERSONNEL REQUIRED**
The Promoter must provide qualified on-site technicians for the duration of load-in, sound check, performance, and load-out.
- **FOH Sound Engineer** – experienced with electronic music (bass management critical)
- **Monitor Engineer** (if separate from FOH)
- **Lighting Operator** – familiar with DMX programming and cues
- **Stage Manager** – primary point of contact for artist
- **AV Technician** (if projection/holographics used)
- **Electrician** – available during load-in for power verification
> *All crew must be present during sound check and performance. Artist reserves right to delay start if key personnel are absent.*
## **6. TRANSPORT & LOAD-IN**
- **Load-in window:** Minimum 3 hours prior to doors (earlier for festivals or complex setups)
- **Load-out window:** Minimum 90 minutes post-performance
- **Vehicle access:** Close proximity (within 20m) to stage or loading bay
- **Ramps or lifts** required if elevation change exceeds 30cm
- **Security personnel** during load-in/out for equipment protection
- **Backup Plan:** Promoter must have contingency plan for power failure (generator with automatic transfer switch preferred)
- **Signage:** Artist name visible at entrance and stage ("QUEST CHILLZ")
- **Merchandise Table:** 1.5m table + chair near exit (if applicable)
- **Recording & Streaming:** Prior approval required for audio/video capture
- **Force Majeure:** Artist not liable for cancellations due to technical failure beyond their control
## **8. CONTACT FOR TECHNICAL QUERIES**
**Technical Liaison:** Mpho Appellation Chiloane
**Phone/WhatsApp:** +27 71 467 9425
**Management Backup:** [To be confirmed upon booking]
> *Please return signed copy of this rider or confirm acceptance via email at least 14 days prior to event. Substitutions require written approval.*
*© 2026 Questive Inc. All Rights Reserved.*
*Technical Rider subject to change based on event type (club, festival, private, residency).*
andulkaphoto
romaincrisis
theartofmadeline
baratheonpilled
discoholicmusic