Untitled

[routerasus-blog]

MAC filtration on Dlink wifi router device

Dlink DAP or dlink access point devices will allow you to have wifi in wireless mode but when you are making any wifi settings for your dlink device, you will also need to make sure that you can control wifi access for all computer and other wireless devices that connected to your wifi network. From http dlinkrouter local or http page you will allow to change access permissions for your computer devices.

In this article we will explain steps for making MAC address filtrations for your dlink DAP wifi. You must use MAC address for any kind of wifi settings for your dlink device because MAC address will always remain constant for all wireless devices that you are using. If you do not know that MAC address of a computer device then you can find this MAC address from the status page of your device.

How to Make MAC Filtrations for Dlink WiFi Router Devices?

1.     Via a web browser make dlink DAP login. Web browser must be updated and you can also connect a computer device to your dlink device using cable.

2.     Fill http dlinkrouter local or http or 192.168.0.1 IP address to the website address.

3.     Fill dlink login user name and password.

4.     After that click on “Advanced” button from the setup window.

5.     Click on “MAC Address Filter” option button.

6.     First you will need to make the “Mode” settings for your device. Using these Mode settings you can easily allow or deny some kind of wifi access for your devices.FRONT PANEL OF DLINK DI-SR ROUTER EXPLAINED.

7.     After that configure “Filter Wired Clients” and “ Filter Wired Clients” option.

8.     Click on “Apply” button at the end.

These are steps to make MAC address filtrations for any Dlink DAP devices at your network.  

[routerasus-blog]

Amped wireless 802.11ac range extender

Amped wifi extender devices will provide you facility that you can make 802.11ac settings for your device. Using setup.ampedwireless.com setup page you can make any kind of 802.11 ac settings for your devices. When you need to choose these Amped wifi extender devices, make sure that you can choose a device that can easily full fill your wifi needs.

Here are Features of Amped 802.11ac WiFi Extender Devices

·        These advance wifi extender devices are universally accepted devices that mean this wifi extender device can work with all router devices and modem devices.

·        Boost Band wifi facility will allow your devices to have high speed wifi connections easily. That means, you will not need any kind other device to boost your wifi speed.

·        These are some external antennas that will allow you to get wifi connections for complete home.

·        Simple WPS settings will allow you to add your setup.ampedwireless.com setup device to your home network. Using these facilities you will not need to access your device settings page separately.

·        These wifi extender devices can also provide you wifi connections even from hard walls and you will not need any kind of separate wifi for your devices.network statics for amped wifi extender devices.

·        Separate guest network is allowed for Amped wifi extender devices. When you configure a separate wifi connections separate your device, you can give or deny some wifi permissions to your guests.

·        Very simple setup is available for this Amped wifi extender device so you can configure your device by your own.

 These are some shortlisted features of Amped wifi extender device. there are also some other advance features but for that you need to read other articles from our website.      

[routerasus-blog]

Change the wifi access password for Dlink wifi router

Once you done basic settings for your dlink wifi router device, you can connect your Windows or Android platforms easily with dlink devices. In this article, we will explain steps for changing the default password for your dlink devices. From http dlinkrouter local com page you can easily change wifi access password for your device.

If you want to change wifi access password for dlink device you are using, make sure that you have login user name and password ready for your dlink device. Only from dlink login page you can easily change wifi access password for your device.

How to Change Default WiFi Password for Dlink Router you are Using?

1.     Connect dlink router with a computer device.

2.     Using web browser access http dlinkrouter local com page and then you will need dlink login user name and password for your device access.

3.     When you type accurate or correct login details for dlink router device, you will get the dashboard of dlink router.

4.     After that you can click on “setup” button.

5.     Click on “Wireless Settings” button.

6.     At the end select “Manual Wireless Network Setup” button.

7.     From there you can change dlink wifi access password. When you change the wifi password for your device, you will also able to change WPA or security settings for your device. Before that you can also change the security mode for your devices.RECOVER LOST ADMIN PASSWARD FOR YOUR DLINK.

You can also change dlink wifi access password from dlink application. Install dlink application to your device and then you can change your wifi access password easily. You can use same steps for changing your wifi password from mobile application.  

[routerasus-blog]

Browser Login for Amped Wireless

Amped wifi wireless devices are used so that you can boost slow wifi connections at your location. When you have Amped wireless wifi devices, you can configures these devices using http //setup.ampedwireless.com web address. When you have a computer device, you can easily handle your device settings easily.

When you need to access your Amped wireless dashboard, you will need some steps for this and these steps are explained here in full details.

1.     See your Amped wireless device very carefully, you will not find any screen on your device but for that you will need a computer.setup wizard for amped ac1300 exyender device.

2.     Get a LAN cable and then connect your Amped wireless device with a computer. Make sure that power supply if Off for your devices before your connect your device.

3.     From the web browser type http //setup.ampedwireless.com to the address bar.

4.     Fill default user name and then fill default password for accessing Amped wireless setup page.

5.     Access your device settings easily from this setup page. Because you are log in to your Amped wireless devices to first time so you do not need to update your device because it is a fresh device. you can surely change the default login user name and password from “Administration” page.  

  Change the settings for your Amped device from this dashboard and then you can close the web browser. You can remove the LAN or Ethernet cable that is connecting your computer and Amped devices. You can then place your device to actual location. If you want to make these settings from your mobile device then you can install Amped application to your mobile device and you can then make login for your device from this mobile application.    

[routerasus-blog]

Steps to configure the firmware file

You can easily find firmware of your tplink wifi router device but for that you will need to get default login address for tplink router and you must also know about which model you are using for your tplink router. When you find accurate firmware file, you can update this file using tp link wifi setup page. In this article we are explaining complete steps for update firmware for your tplink device.tp-link router firmware updates using wifi utility

Steps to Update Firmware for TP-Link Router Device

1.     Access tplink official website from a computer device.

2.     Fill your tplink router model number and then you will find new firmware file for your tplink router device.

3.     Access tp link wifi setup page using http:// 192.168.0.1 IP address but for that you will need a computer system.

4.     Fill tplink login user name and password and get the configuration page of your device.

5.     Click on “System Tools” button.

6.     After that click on “Backup and Restore” button. When you click on this button, you can have backup of your device and save your device settings to any location at your computer. After that your device to restore to default settings and all settings will be deleted from your device.

7.     Click on “Firmware Tools” button from tplink setup page.

8.     Click on “Browse” button and then choose tplink firmware file.

9.     When you choose the firmware file, you must not disturb the process and wait for few seconds.

You can then restart your device so that you can get best performance for tplink wifi router device. you must update firmware for tplink router device and tplink wifi extender device after every few months.    

[routerasus-blog]

Setup location for Amped wifi Extender Device

If you need to get high speed wifi connections at your network, you can easily get wifi connections using http //setup.ampedwireless.com setup extender device. When you install advance Amped wifi extender and modem devices, you can access dashboard of your device and change settings for your device.

Choosing Location for your Amped WiFi Device at your Home

When you place Amped device for your home, you can easily get best settings for your device but for that you will need to get best location for your Amped wireless devices. Best location for placing your Amped wireless device is the center location of your wifi router device and any kind of dead zones that you are having for your home. Setup wizard for amped ac1300 extender device

This is not the final location for placing your Amped wifi extender device because you can change your device’s location according to the wifi connections you are getting. If you find that your Amped device is not providing your good range of wifi signals, you can try to change the location of your device.

If you have tried to change the location of your Amped wireless devices and still you are getting slow wifi connections then you can also check new updates for your device using http //setup.ampedwireless.com setup page. If you find that your device need new updates then you can update your device using your device model number.

These are some tricks to choose location for your Amped wireless devices but still you are getting slow wifi connections then you can contact Amped support team for help. When you call Amped support team for help, they will surely help you to get best performance for your Amped wireless devices.  

[routerasus-blog]

Setting up quality of services for dlink routers

Quality of services is advance settings that you will configure for your dlink router device. We know that some users can’t make quality of services easily using http dlinkrouter local setup wizard and that is why we are writing this article. In this article we are explaining simple steps for setting up quality of services from a computer system. When you need to make quality of services or any kind of soft services for your device, you will need to access dlink login page from your computer.

Here are Steps to Configure Quality or Services for Dlink Router Devices

1.     Access dlink login page from your computer.

2.     Fill http dlinkrouter local setup wizard in the address bar and fill dlink login user name and password.

3.     Get access to dlink router setup page because from there you can easily configure all kind of hardware and software based settings for dlink device.

4.     Click on “Advanced” tab.

5.     After that click on “QoS” tab from the left side menu.Wireless setting d-link DWL-G730-AP DLINK WIFI

6.     Enable QoS for dlink wifi router device you can specify the uplink speed for your dlink wifi router device.

7.     Once the quality of services is done for your dlink router, click on “Save” button.

These are steps to make QoS settings for dlink wifi router devices. You can then make other admin related settings for your device and you can change the routing settings for the data packets, guest zone settings, IPv6 and IPv4 settings and network filter settings for dlink wifi router device that you are using.    

Network filters are used so that you can easily make the website filter for dlink router device that you are using. When you filter the web traffic for your home, you can block some sensitive websites from your home.  

[routerasus-blog]

Find the MAC address for the tplink wifi

Tplink wifi router devices are very useful when you need wireless wifi connections for your computer devices. When you get any tplink wifi router device, you will allow to access the tplinkwifi net admin page for your device so that you can change your device settings.

There are some default settings and configurations that you will get with your tplink wifi extender device. One of these setups is MAC address of your tplink wifi router device. When you need to find MAC address for your tplink wifi router device, this article will help you.

Here are Steps to Find MAC Address for your TP-Link WiFi Router Device

1.     Connect your tplink wifi router to computer.

2.     Connect power supply to your computer and tplink wifi router. Easily configure the tplink TL devices to make it work for the DSL modem devices.

3.     Open web browser from this computer. This web browser must have Java script enabled.

4.     Fill tplinkwifi net in address bar and get the login page.

5.     Fill tplink wifi router login user name and password.

6.     Select “Status” button from this page.

7.     From this page you can easily find the MAC address for your tplink wifi router device.

8.     You can then note down the MAC address and close the setup page.

These are steps for finding the Mac address for your tplink wifi router device. You can then get the other settings for your device where you need MAC address.

Remember that you can’t change the MAC address for your tplink router device easily. For that, you will need to contact tplink support team for help. They will take your router charge for remote access and then they will change your device settings from their end.  

[routerasus-blog]

How to Setup Priorities to your Linksys smart wifi routers

Linksys wifi router devices can give you high speed wifi connections for all computer and gaming devices but there is an issues with these kind of wifi connections. When you connect multiple wireless devices to your Linksys router, bandwidth may get lost between these devices. Using myrouterlocal login page you can change or reconfigure the priorities for your wireless devices.

When you reset the priorities for all wireless devices connected to your network, you are actually providing more wifi speed for some important devices. Make sure that you can easily make login for your Linksys device setup page only then you can get settings for your device. Catch the best procedure for using the speed test for the Linksys smart wifi routers.

Steps to Set Priorities for Linksys Routers

1.     Access login page for Linksys router device. when you say “Linksys Router Login” we mean to say that you will need to access your router setup page from a computer system.

2.     Fill Linksys myrouterlocal login user name and password.

3.     Select “Media Prioritization” button from the setup page.

4.     Enable media priorities for your devices.

5.     There you will able to select devices for high bandwidth and low bandwidth. Using mobile cursor you can change the location of your devices.

6.     At the end click on “OK” button and you can save your device settings.

These are the steps to make priorities for your Linksys wifi router devices. When you connect more devices to your Linksys router, this will slow down your wifi network. We will suggest that you must get a new router device and configure this router as bridge mode for your network.  

[routerasus-blog]

Setting Up WPA and WPA2 for Netgear WN2000RPT wifi extender

If you are happy with your Netgear WN2000RPT wifi extender device performance and you want to make sure that all data that is traveling to your device is totally secure then you can configure WPA and WPA2 settings for your devices. Using Netgear extender login page of your device, you can easily make these security settings for your devices.

 When you Need to Make WPA Security for your Netgear WN2000RPT wifi extender, you must Know these Configurations

 ·        You must know about IP address for your device login. Check the information regarding the Netgear wifi extender configuration for the replaced configuration.

·        You must know about Netgear extender login user name and password.

·        You must have high speed wifi connections for your computer device.

 Steps to Make WPA and WPA2 Settings for Netgear WN2000RPT wifi extender

 1.     Get a computer device.

2.     Get a LAN cable from any computer shop.

3.     Remove power supply for your compute Netgear WN2000RPT wifi extender and other devices.

4.     Connect one end of cable to WAN port of your wifi extender device.

5.     Connect second end of cable to a computer.

6.     Once again provide power supply to these devices.

7.     Open web browser to this computer.

8.     Fill Netgear extender login address to this web browser.

9.     After that fill Netgear extender login user name and password.

10.                        Select “Advanced Settings” for your device.

11.                        After that select WPA or WPA2 settings for your wifi extender device.

12.                        Click on “Apply” button from this page.

 These are steps to configure advance WPA and WPA2 security settings for your Netgear WN2000RPT wifi extender settings. Your data packets are totally safe now so you can connect as many as wireless devices to your extender device.    

[routerasus-blog]

How to access Dlink DCS-8100LH HD

If you are getting a new Dlink DCS-8100LH HD device for your home then you will need to configure and setup this device accurately. You can easily access login page for your device and then you can access the settings for your device.

 Using mydlink com login page for Dlink DCS-8100LH HD router device you can easily setup wireless settings like admin and bandwidth settings for these devices. In this article, we are going to explain steps for accessing login page for your dlink device.

 Here are Steps to Access Login Page for Dlink DCS-8100LH HD Device

 1.     Connect your Dlink DCS-8100LH HD device to your computer device. Here is the right procedure for recovering the lost password for the dlink password.

2.     After that provide power supply to your dlink router and computer device at the same time.

3.     You can then open web browser and fill mydlink com login address to the web browser.

4.     You are at the login page and from there you can fill Dlink DCS-8100LH HD login user name and password.

5.     You are not at the setup page of your device and then you can have the wireless settings for your device.

 These are the simple steps for getting login for advance Dlink DCS-8100LH HD router and access point device. If you can’t login your device setup page then here are the tips for you.

 ·        Make sure that your devices are connected accurately and you can use LAN cable for connecting your devices.

·        Make sure that you are using correct login user name and password for your device.

·        You will need to make sure that your devices are having accurate power supply for your access point and computer device.

·        You can install some advance web browsers to your computer and use this device for your login page access.    

[routerasus-blog]

Back Panel Options with Amped AC1300

If you choose Amped AC1300 wifi extender then you must have knowledge about these wifi extender devices. When you need to get these advance wifi extender devices, you must have knowledge about the back and front panel of these devices. Using setup.ampedwireless.com setup page you can handle your device settings but if you want to configure your device from itself then you must use these options available at the back side.

 What Options you will Get at the Back Panel of Amped AC1300?

 Here we are explaining various options that you are going to receive at the back side of Amped AC1300 device.

 1.     There is a power ON and power Off button that you can use to handle power supply for your devices.

2.     There is a power adapter at the back side and you will connect power supply of device with this power adapter.

3.     There is a RJ45 connector that you can use to connect your computer device with Amped AC1300 wifi extender device.

4.     There are 4 ports that you will find at the back side. These 4 ports are used so that you connect various hardware devices to your Amped AC1300.

5.     Using “reset” button you can remove current settings for your devices and then you can reconfigure your Amped AC1300 once again using setup.ampedwireless.com setup page.

6.     There is a WPS button that is used so that you can add your Amped AC1300 wifi extender device to your network.

7.     There is a status LED ON and OFF button that you can use so that power ON and power OFF your status LED from device easily. See the best procedure for securing the password for amped devices.

 These are the options that you are going to get at the back side of Amped AC1300 wifi extender device.

[routerasus-blog]

Forgot Login Password for Dlink Camera

If you forgot the login details for your dlink camera devices then this article is for you. In this article, we are explaining the steps for easily recovering the lost password for your dlink camera devices. These login passwords are required so that you can easily access mydlink dlink com from your computer device. you will need dlink camera dashboard so that you can have some advance settings for your devices.

Do This If you Forgot your Dlink Camera Login Password

These are the simple steps that every dlink user can follow in case they have forgot the login password for any dlink camera.

 1.     At the back find the hole that is use to reset dlink camera to default configurations. Go through the internet connection settings for the Dlink DCS-960 Panoramic cameras from the blog here.

2.     Use any paper pin and press that reset hole for few seconds.

 Your dlink camera is not set to factory settings. You can then use the default login user name and password for your device login. You can access mydlink dlink com web address and once again you can have a new password for your camera login.

 When you are choosing a new password for your device login, you must note down your new password to your notebook. Every time when you forgot your dlink camera login password, you will need to reset your device. try  not to forgot your login password and choose strong password that is also easy to remember.    

[routerasus-blog]

Login IP address for Dlink Devices

dlink devices are delivered without user interface so you can either use a computer device to mobile device for accessing your device login page.

You can access dlink cloud login address for getting access for the cloud account of your device. in this article we will explain complete concepts about the login IP addresses that you must know about default login IP address.

What are Login IP Address for Dlink Devices?

If you know little about networking then you must know that most of networking devices have a unique identification number that is known as IP address. This number can also be hardware based and that number is known as MAC address for that device. Here is the procedure that can help you in configuring the dlink DAP 1520 range extender devices.

These addresses are used so that you can uniquely identify these networking devices any time. When you get the router or wifi extender device, you will not get not login page for these devices. You can use dlink cloud login IP address for accessing dlink device login page.

How to Access dlink Login Page from Compute?

When you use any dlink device then there a default login IP, default login address and default user name and getting the settings access.

Dlink Device Default Login IP: 192.168.1.1 or 192.168.0.1

Default Dlink Login User Name: admin

Default Delink Login Password: admin

Remember that you can easily change the default login IP and login password for all your dlink devices. Default login user name and password can also be changed any time.  

[routerasus-blog]

LED lights for Dlink 365 Router devices

If you are installing advance dlink 365 device to your wifi network then you can get best configurations for these devices using the status LED lights. These status LED lights will help you to get the setup details for your dlink devices. Using dlink login page you can find that status LED details for your dlink device. the status LED lights that we are explaining in this article are common for all dlink wifi router and extender devices. Go and check what are the various wireless security configurations for the wireless extenders.

 Here are the Status LED Lights Explained for Dlink 365 Devices  

 1.     Using internet status LED for your device you can make sure that your dlink device is connected to internet wifi connections accurately. This status LED will be OFF when you are not having any kind of wifi connections.

2.     When you dlink device is ready to work then the status LED will be solid green in color.

3.     When you connect any USB device to your dlink device then the WCN status LED will be solid green. You can share that USB device to other computer devices.

4.     When you device is receiving accurate power supply then the power LED will be solid green I color. If you find that your dlink login power status LED is not glowing at all then you can check the power supply for your device once again.

5.     When you connect any computer device to your dlink device then the local network LED lights will be green in color. There are 4 status LED lights that you can find with your device that means you can connect up to 4 cable device to your dlink at a time.

 These are the various status LED lights that you will get with your dlink device.

[routerasus-blog]

TP-Link AC 3200Wireless router  front view

at the front end of TP-Link AC 3200Wireless router device you will get some advance hardware points for configuring your devices. You can easily setup your tplink device all these points. Using my tplink router login page you can make setups for your devices and in this article we are going to explain all these points.

 Here are the Hardware Options that you will Get at the Front End of TP-Link AC 3200Wireless router

 1.     Power LED is placed at the front end of your router device and this power status LED will help you to make sure that device is having working power connections. Check out the LED explanation for the tplink wifi router devices using the blog here.

2.     When you configure TP-Link AC 3200Wireless router device for 2.4 GHz network then this status LED will be solid green in colour.

3.     When you configure your tplink router device for 5 GHz then status LED for 5 GHz will be green in color.

4.     When you connect any computer device to your TP-Link AC 3200Wireless router using Ethernet cable then the Ethernet cable will be solid green.

5.     If your router device is having working internet connections then status LED will be green and if internet LED is orange in color that means internet connections going to setup.

6.     When you configure your device using WPS button then WPS button will blink in fast speed.

 These are the options that you will get at the front end of your TP-Link AC 3200Wireless router device. if you need to setup this router device then you can access my tplink router login page from a computer device.    

[routerasus-blog]

Features of Amped Wireless Devices

Amped WiFi router devices and Amped WiFi extender devices, both are very useful for accessing high speed internet connections. You can install Amped WiFi router device to your home network and using setup.ampedwireless.com setup page you can manage all settings for your device. in this article, we are going to explain the advance features that all Amped WiFi router devices have. If you want to get more details for Amped devices then you can other articles from this website.

What are the Benefits of Having Amped WiFi Router Devices?

·         All Amped devices are easy to setup for first time. When you need to add Amped device to your network, you can use WPS configurations for Amped devices.

·         If you want to high speed WiFi connections in wireless mode then Amped WiFi router devices are best devices for you. Using setup.ampedwireless.com setup page you can search for the SSID network available for Amped devices.

·         Working processors for Amped devices are very powerful and they are capable to deliver you high speed internet connections easily.

·         Some Amped devices also have external antennas. When you get antennas for Amped device, must connect these antennas to your device.

·         When you want to control bandwidth for devices that you are using, you can configure “Bandwidth Controls” for Amped devices.

·         Parental controls are also possible for Amped devices and when you configure parental controls for Amped device, you can block some sensitive websites for your users.

·         At the back side of Amped WiFi router devices, you can connect some cable devices to your router. Check what is the meaning of free wifi hotspot from the blog here.

These are the features that you will find with each Amped WiFi router device. even, all Amped WiFi extender devices also have such advance features.