Speed Screed Limited @speedscreed - Tumblr Blog

We are here to help - [email protected] - 0800 242 5589 - www.speed-screed.com Gyvlon XTR Overview I’m Andy Parkin, Managing Director of the Multi Award Winning Speed Screed, and I’m here today to talk about Gyvlon XTR Gyvlon XTR flowing screed is designed to provide a smooth level surface in both commercial and domestic buildings where higher than usual loadings are expected, prior to the application of final floor finishes Applications Gyvlon XTR Perfect for: Residential/Commercial/Retail/Healthcare buildings Schools Floating, bonded and un-bonded construction Incorporation of electric or wet underfloor heating systems Timber, concrete and steel frame Gyvlon XTR is not suitable for: Permanently wet areas, such as commercial changing rooms/swimming pool surrounds Area that require falls How It Is Supplied? Gyvlon XTR is supplied directly from the screed manufacturer. Supplied in ready-mixed truck mixers. 4/6/8/10 wheelers. The screed is then discharged into a specialist screed pump, and then pumped into place. Drying Times Approximately 1mm per day, up to 40mm. Beyond 40mm, 0.5mm per day. This is based on 20 degrees and 60 relative humidity After 7 days the screed can be forced dried to speed up the process. Foot Traffic 24-48 hours Screed Depths Bonded 25mm Unbonded 30mm Floating 35mm Domestic 40mm Commercial Acoustic 80kg @ 40mm Coverage over underfloor heating pipes 25mm minimum, 30mm nominal Screed Super Powers High strength Compressive C35, Flexural F7 Up to 2000m2 per day productivity Joints at 30-40 linear meters Very low shrinkage Minimal cracking Will not curl No need for curing membrane No reinforcement required Requires no manual compaction Eco friendly calcium sulphate binder Free from protein and does not harbour harmful bacteria. With nearly twice the thermal conductivity of traditional sand and cement screeds Gyvlon XTR is perfect for underfloor heating. Feel free to contact us for further information about Gyvlon XTR. . #screed #speedscreed #floorscreeding

We are here to help - [email protected] - 0800 242 5589 - www.speed-screed.com Gyvlon THERMIO+ – The Underfloor Heating Solution I’m Andy Parkin, Managing Director of the Multi Award Winning Speed Screed, and I’m here today to talk about Gyvlon THERMIO+ GENERAL OVERVIEW Gyvlon THERMIO+ THERMIO®+ Technology improves the performance of underfloor heating systems by creating a screed that is specifically designed to complement low temperature heating systems. Gyvlon THERMIO+ is the only screed with a guaranteed thermal performance. APPLICATIONS Perfect for: Residential/Commercial/Retail/Healthcare buildings Schools Floating, bonded and un-bonded construction Incorporation of electric or wet underfloor heating systems Timber, concrete and steel frame THERMIO®+ is not suitable for: Permanently wet areas, such as commercial changing rooms/swimming pool surrounds Area that require falls MIXING/SUPPLY Gyvlon THERMIO+ is supplied directly from the screed manufacturer. Supplied in ready-mixed truck mixers. 4/6/8/10 wheelers. The screed is then discharged into a specialist screed pump, and then pumped into place. DRYING TIMES Approximately 1mm per day, up to 40mm. Beyond 40mm, 0.5mm per day. This is based on 20 degrees and 60 relative humidity After 7 days the screed can be forced dried to speed up the process. FOOT TRAFFIC 24-48 hours SCREED DEPTHS Bonded 25mm Unbonded 30mm Floating 35mm Domestic 40mm Commercial Acoustic 80kg @ 40mm Coverage over underfloor heating pipes 20mm ***it should be noted that those depths are based on the standard mix, and other options are available. SCREED SUPER POWERS up to 30% increase in thermal emission value for maximised underfloor heating performance up to 80% of thermal diffusivity for a much faster ramp-up in temperature, greatly improving immediate and long term comfort up to 8% savings on the heating bills Up to 2000m2 per day productivity Joints at 30-40 linear meters Very low shrinkage Minimal cracking Will not curl No need for curing membrane No reinforcement required Requires no manual compaction Eco friendly calcium sulphate binder Free from protein and does not harbour harmful bacteria. With nearly twice the thermal conductivity of traditional sand and cement screeds Gyvlon THERMIO+ is perfect for underfloor heating. Feel free to contact us for further information about Gyvlon THERMIO+. #screed #speedscreed #floorscreeding

We are here to help - [email protected] - 0800 242 5589 -www.speed-screed.com Gyvlon Steeldeck – Fast Track Solution I’m Andy Parkin, Managing Director of the Multi Award Winning Speed Screed, and I’m here today to talk about Gyvlon Steeldeck General Overview – Gyvlon Steeldeck Gyvlon Steeldeck flowing screed is designed specifically to be used with the Lewis Deck dovetail sheeting. This is for use with either timber, metal web or steel joists in masonry, timber or light weight steel structures. Forming either ground, separating or mezzanine floor constructions and providing a smooth level surface in any kind of building. The Steeldeck Technology has all the advantages of anhydrite base screeds, but an improved adherence into any kind of steel structure. Steeldeck can be used in any kind of situation, but its bespoke features tailor it with Lewis Deck dovetail sheeting or any other kind of metal structure. APPLICATIONS Perfect for: Residential/Commercial/Retail/Healthcare buildings Schools Incorporation of electric or wet underfloor heating systems MIXING/SUPPLY Gyvlon Steeldeck is supplied directly from the screed manufacturer. Supplied in ready-mixed truck mixers. 4/6/8/10 wheelers. The screed is then discharged into a specialist screed pump, and then pumped into place. DRYING TIMES Approximately 1mm per day, up to 40mm. Beyond 40mm, 0.5mm per day. This is based on 20 degrees and 60 relative humidity After 7 days the screed can be forced dried to speed up the process. FOOT TRAFFIC 24-48 hours SCREED SUPER POWERS In combination with Lewis Decking provides a structural floor Up to 2000m2 per day productivity Joints at 30-40 linear meters 1000m2 jointless Very low shrinkage Minimal cracking Will not curl No need for curing membrane No reinforcement required Requires no manual compaction Eco friendly calcium sulphate binder Free from protein and does not harbour harmful bacteria. With nearly twice the thermal conductivity of traditional sand and cement screeds Gyvlon Steeldeck is perfect for underfloor heating. Feel free to contact us for further information about Gyvlon Steeldeck. #screed #speedscreed #floorscreeding

We are here to help - [email protected] - 0800 242 5589 - www.speed-screed.com Gyvlon Soundbar – Your Timber Floor Solution I’m Andy Parkin, Managing Director of the Multi Award Winning Speed Screed, and I’m here today to talk about Gyvlon Soundbar General Overview – Gyvlon Soundbar The Gyvlon® Screed Soundbar System is a unique, total acoustic flooring solution which is the only system of its kind to have achieved Robust Detail, E-FT-4. This provides the developer with the confidence and assurance of achieving a performance standard over and above Part E of the building regulations The SoundBar®System delivers by providing a shallower, high quality, solid floor feel. Designed to improve upon the acoustic performance of a traditional timber floor. APPLICATIONS Perfect for: Residential/Commercial/Retail/Healthcare buildings Schools Incorporation of electric or wet underfloor heating systems Timber, concrete and steel frame MIXING/SUPPLY Gyvlon Soundbar is supplied directly from the screed manufacturer. Supplied in ready-mixed truck mixers. 4/6/8/10 wheelers. The screed is then discharged into a specialist screed pump, and then pumped into place. DRYING TIMES Approximately 1mm per day, up to 40mm. Beyond 40mm, 0.5mm per day. This is based on 20 degrees and 60 relative humidity After 7 days the screed can be forced dried to speed up the process. FOOT TRAFFIC 24-48 hours SCREED SUPER POWERS Makes a timber floor feel like a concrete floor Saving in floor height over E-FT-1 of 61mm Up to 2000m2 per day productivity Joints at 30-40 linear meters 1000m2 jointless Very low shrinkage Minimal cracking Will not curl No need for curing membrane No reinforcement required Requires no manual compaction Eco friendly calcium sulphate binder Free from protein and does not harbour harmful bacteria. With nearly twice the thermal conductivity of traditional sand and cement screeds Gyvlon Soundbar is perfect for underfloor heating. Feel free to contact us for further information about Gyvlon Soundbar. #screed #speedscreed #floorscreeding

We are here to help - [email protected] - 0800 242 5589 - www.speed-screed.comLooking For A Smoothing Compound? – Gyvlon EXCELIO Could Be The AnswerI’m Andy Parkin, Managing Director of the Multi Award Winning Speed Screed, and I’m here today to talk about Gyvlon EXCELIOGENERAL OVERVIEWGyvlon EXCELIO was developed to bridge the gap self-smoothing compounds and bonded screeds. This thin floor product offers a number of benefits:Cost, Labour and Time savings on the build programmeAchieves SR1 surface regularitySignificantly faster installation compared to thin section smoothing compoundsAPPLICATIONSPerfect for:Residential/Commercial/Retail/Healthcare buildingsSchoolsBondedGyvlon EXCELIO is not suitable for:Permanently wet areas, such as commercial changing rooms/swimming pool surroundsArea that require fallsMIXING/SUPPLYGyvlon EXCELIO is supplied directly from the screed manufacturer. Supplied in ready-mixed truck mixers. 4/6/8/10 wheelers.The screed is then discharged into a specialist screed pump, and then pumped into place. 6m3 per 20-30 minutes can pumped into place.SCREED DEPTHS MINIMUMSBonded 12mm minimum directly to substrateSCREED SUPER POWERSBonding from only 12mmHigh productivity, with 83m2 per 1m3Very low shrinkageEco friendly calcium sulphate binderFree from protein and does not harbour harmful bacteria.SR1 surface regularitySaves cost on labour and time on the project build time.Feel free to contact us for further information about Gyvlon EXCELIO.#screed #speedscreed #floorscreeding

0800 242 5589 - www.speed-screed.com - [email protected]'m Andy Parkin, Managing Director of the Multi-Award-Winning Speed Screed. Today I'm here to give you a little more insight into Gyvlon FD.So What is Gyvlon FD? Gyvlon FD screed enables floor coverings to be applied at least twice as fast as standard Gyvlon screed. In addition, it brings together all the proven benefits expected from a Gyvlon screed which also include a low-skin option.Just What are the benefits of Gyvlon FD?• Very high fluidity – for fast installation.• Low shrinkage – significantly reduced cracking, no curling• Less need for joints • No reinforcement• No curing membrane• Minimum SR2 surface finishSpecifications• Mechanical Strength C25• Unbonded Minimum Thickness 30mm• Floating Minimum Thickness 35mm (domestic), 40mm Commercial.• Requires no reinforcement• Joints 800m2 (300m2 with underfloor heating)ApplicationsProductivity and ease of use – The screed exhibits very high productivity rates (20m3m/h). It is possible to walk on after 24 hours and generally accept trades and foot traffic within 48 hours. It offers excellent versatility and is used in most applications: underfloor heating/cooling, thermal & sound insulation.Unlike cement-based screeds, the absence of expansion joints preserves the aesthetics of the floor coverings. It allows all the freedom both in terms of tile sizes and layouts. So, there you have it, Gyvlon FD. For more information, please contact us. We love to help!This video is all about Gyvlon Eco FD information but also try to cover the following subjects:-Gyvlon Fast Drying Screed-Fast Drying Liquid Screed-Fast Drying Flowing ScreedSo you wish to find out more about Gyvlon Eco FD, here's the video that I created around this topic.Gyvlon Eco FD intrigued me so I did some research and published this to YT .++++++++++++++++++++++Our channel has various other related videos about Gyvlon Fast Drying Screed, Fast Drying Liquid Screed and Fast Drying Flowing ScreedPlease check them out : https://www.youtube.com/channel/UC875992kovWfKbnE2Zn-Irg++++++++++++++++++++++Have I addressed all of your questions about Gyvlon Eco FD?People who looked for Gyvlon Fast Drying Screed also searched for Fast Drying Liquid Screed.#screed #speedscreed #floorscreeding

We are here to help - [email protected] - 0800 242 5589 - www.speed-screed.comGyvlon Eco – The Sustainable ChoiceI’m Andy Parkin, Managing Director of the Multi Award Winning Speed Screed, and I’m here today to talk about Gyvlon EcoGeneral Overview – Gyvlon EcoGyvlon Eco is a calcium sulphate based flowing screed, with full BBA approval.ApplicationsPerfect for:Residential/Commercial/Retail/Healthcare buildingsSchoolsFloating, bonded and un-bonded constructionIncorporation of electric or wet underfloor heating systemsTimber, concrete and steel frameGyvlon Eco is not suitable for:Permanently wet areas, such as commercial changing rooms/swimming pool surroundsArea that require fallsMixing/SupplyGyvlon Eco is supplied directly from the screed manufacturer. Supplied in ready-mixed truck mixers. 4/6/8/10 wheelers.The screed is then discharged into a specialist screed pump, and then pumped into place.Drying TimesApproximately 1mm per day, up to 40mm. Beyond 40mm, 0.5mm per day. This is based on 20 degrees and 60 relative humidityAfter 7 days the screed can be forced dried to speed up the process.Foot Traffic24-48 hoursScreed DepthsBonded 25mmUnbonded 30mmFloating 35mm Domestic40mm Commercial Acoustic 80kg @ 40mmCoverage over underfloor heating pipes 30mm***it should be noted that those depths are based on the standard mix, and other options are available.Screed Super PowersUp to 2000m2 per day productivityJoints at 30-40 linear metersVery low shrinkageMinimal crackingWill not curlNo need for curing membraneNo reinforcement requiredRequires no manual compactionEco friendly calcium sulphate binderFree from protein and does not harbour harmful bacteria.With nearly twice the thermal conductivity of traditional sand and cement screeds Gyvlon Eco is perfect for underfloor heating.Feel free to contact us for further information about Gyvlon Eco.#screed #speedscreed #floorscreeding

[email protected] - 0800 242 5589 - www.speed-screed.comGypsol TS20 – Flow ScreedI’m Andy Parkin, Managing Director of the Multi Award Winning Speed Screed, and I’m here today to talk about Gypsol TS20Gypsol TS20 – General OverviewGypsol TS20 is specially formulated to offer a strong and durable ultra-thin topping to a solid interior substrateSubstantial time and cost savings when compared with bagged smoothing compounds.Tested to BS 8204:1:2003 it meets the requirements for class A for impact resistanceApplicationsPerfect for:Refurbishment of old uneven floors.Remediation or correction for out of level concrete slabsAs a levelling screed over floors where floor to ceiling height is very restricted.Sub floor levelling in preparation to receive finished floor coverings.Overlay for poorly levelled screedsAs an alternative to light weight screedsGypsol TS20 is not suitable for:Permanently wet areas, such as commercial changing rooms/swimming pool surroundsArea that require fallsMixing/SupplyGypsol TS20 is supplied directly from the screed manufacturer. Supplied in ready-mixed truck mixers. 4/6/8/10 wheelers.The screed is then discharged into a specialist screed pump, and then pumped into place.Foot Traffic24-48 HoursLoading 5-7 daysDrying Times1mm per day, up to 40mm based on 20 degrees and 60 relative humidityAfter 7 days the screed can be forced dried to speed up the processScreed Depths MinimumsBonded 20mmUnbonded 20mmScreed Super PowersBonded or unbonded only 20mmClass A impact resistanceHigh productivityVery low shrinkageEco friendly calcium sulphate binderFree from protein and does not harbour harmful bacteria.Feel free to contact us for further information about Gypsol TS20.#screed #speedscreed #floorscreeding

[email protected] - 0800 242 5589 - www.speed-screed.com Gypsol TS15 – Looking for thin screed? I’m Andy Parkin, Managing Director of the Multi Award Winning Speed Screed, and I’m here today to talk about Gypsol TS15 General Overview Gypsol TS15 is specially formulated to offer a strong and durable ultra-thin topping to a solid interior substrate. Substantial time and cost savings when compared with bagged smoothing compounds. Applications Perfect for: Refurbishment of old uneven floors. Remediation or correction for out of level concrete slabs As a levelling screed over floors where floor to ceiling height is very restricted. Sub floor levelling in preparation to receive finished floor coverings. Overlay for poorly levelled screeds As an alternative to light weight screeds Gypsol TS15 is not suitable for: Permanently wet areas, such as commercial changing rooms/swimming pool surrounds Area that require falls Mixing/Supply Gypsol TS15 is supplied directly from the screed manufacturer. Supplied in ready-mixed truck mixers. 4/6/8/10 wheelers. The screed is then discharged into a specialist screed pump, and then pumped into place. Screed Depths Minimums Bonded 15mm Unbonded 15mm Screed Super Powers Bonded or unbonded only 15mm High productivity Very low shrinkage Eco friendly calcium sulphate binder Free from protein and does not harbour harmful bacteria. Feel free to contact us for further information about Gypsol TS15. #screed #speedscreed #floorscreeding

Gypsol TimBRE is an Eco-Friendly product. Watch this video to learn about the other benefits of Gypsol TimBRE. If you have any questions, please get in touch by email - [email protected] or by telephone 0880 242 5589.#screed #speedscreed #floorscreeding #Gypsoltimbre

[email protected] - 0800 242 5589 - www.speed-screed.com Gypsol Sureflo – Flow Screed I’m Andy Parkin, Managing Director of the Multi Award Winning Speed Screed, and I’m here today to talk about Gypsol Sureflo Gypsol Sureflo – General Overview Gypsol Sureflo is a calcium sulphate based flowing screed, supplied in 25kg bags to be mixed on site for very small projects or when truck mixer access is limited. Applications Perfect for: Residential/Commercial/Retail/Healthcare buildings Schools Floating, bonded and un-bonded construction Incorporation of electric or wet underfloor heating systems Timber, concrete and steel frame Not suitable for: Permanently wet areas, such as commercial changing rooms/swimming pool surrounds Area that require falls Mixing Supply Gypsol Sureflo is supplied in 25kg bags, and with the addition of water mixed onsite. Drying Times Approximately 1mm per day, up to 40mm. Beyond 40mm, 0.5mm per day. This is based on 20 degrees and 60 relative humidity After 7 days the screed can be forced dried to speed up the process. Foot Traffic 24-48 hours Screed Depths Bonded 25mm Unbonded 30mm Floating 35mm Domestic 40mm Commercial Acoustic 80kg @ 40mm Coverage to conduits 25mm Screed Super Powers Up to 2000m2 per day productivity Joints at 30-40 linear meters Very low shrinkage Minimal cracking Will not curl No need for curing membrane No reinforcement required Requires no manual compaction Eco friendly calcium sulphate binder Free from protein and does not harbour harmful bacteria. With nearly twice the thermal conductivity of traditional sand and cement screeds Gypsol Sureflo is perfect for underfloor heating. Feel free to contact us for further information about Gypsol Sureflo. #screed #speedscreed #floorscreeding

0800 242 5589 - [email protected] - www.speed-screed.com Gypsol Rapide – Flowing Screed Option I’m Andy Parkin, Managing Director of the Multi-Award Winning Speed Screed. I’m here to talk about Gypsol Rapide. Traditional Calcium Sulphate screeds are sometimes classed as undependable in modern construction due to the slow drying times, with 60mm depth taking around 80 days to dry in perfect conditions. However, Gypsol has come up with a product to solve this issue – Gypsol Rapide. It’s a remarkable product that introduces the concept of fast drying with the benefits of a standard calcium sulphate screed. To prove that this screed does actually dry when it promises too, the product has been tested extensively by independent sources. What’s Different About the Gypsol Rapide? Gypsol Rapide is a traditional liquid screed with a super power!: it dries in just a fraction of the time “normal” screed takes. Gypsol Rapide has been developed with fast drying and all the other usual benefits such as the ability to self-compact, offering a free-flowing and self-smoothing screed. Gypsol Rapide hence offers a great liquid screed solution for people who do not like to wait for their screed to dry. Gypsol Rapide can dry in around 2 weeks (depending site conditions). Laitance removal is not required, which saves the cost of grinding the surface of calcium sulphate screeds to ready them to receive floor coverings. Furthermore The raw materials used by Gypsol are, environment-friendly and sustainable. This makes Gypsol Rapide not just fast and effective, but also a way to protect the environment. Gypsol anhydrite screed binder is developed through recycled materials. The materials utilized in the Gypsol binder are carefully selected and sourced to ensure that not a single raw material comes from sources that are harmful to the environment. Gypsol Rapide is more than just an environmentally friendly screed product. It’s performance far exceeds what you can find with a regular screed solution. The screed can be laid very easily by trained experts. Moreover, the two week drying time is something that you will not find fulfilled by most other screed solutions on the market. It’s a great product from all aspects, with its help in reducing the use of non-renewable resources acting as an additional testament to its uniqueness. Hence, if you’re looking for a regular screed product that offers you immense benefits on top of additional features, then Gypsol Rapide is just for you. It is widely available in the market and you can find it easily. I hope this helps with your “Gypsol Rapide” questions, if you would like any further help please get in touch. #screed #speedscreed #floorscreeding

[email protected] - 0800 242 5589 - www.speed-screed.com Gypsol HTC – The underfloor heating screed I’m Andy Parkin, Managing Director of the Multi Award Winning Speed Screed, and I’m here today to talk about Gypsol HTC Gypsol HTC – General Overview Gypsol HTC is a High Thermal Conductivity calcium sulphate based flowing screed, specifically designed for use with underfloor heating and cooling systems. Applications Perfect for: Residential/Commercial/Retail/Healthcare buildings Schools Floating, bonded and un-bonded construction Incorporation of electric or wet underfloor heating systems Timber, concrete and steel frame Gypsol HTC is not suitable for: Permanently wet areas, such as commercial changing rooms/swimming pool surrounds Area that require falls Mixing/Supply Gypsol HTC is supplied directly from the screed manufacturer. Supplied in ready-mixed truck mixers. 4/6/8/10 wheelers. The screed is then discharged into a specialist screed pump, and then pumped into place. Drying Times Approximately 1mm per day, up to 40mm. Beyond 40mm, 0.5mm per day. This is based on 20 degrees and 60 relative humidity After 7 days the screed can be forced dried to speed up the process. Foot Traffic 24-48 hours Screed Depths Coverage to conduits 20mm Screed Super Powers Only 20mm coverage of the pipes! Up to 2000m2 per day productivity 300m2 without joints Very low shrinkage Minimal cracking Will not curl No need for curing membrane No reinforcement required Requires no manual compaction Eco friendly calcium sulphate binder Free from protein and does not harbour harmful bacteria. With nearly twice the thermal conductivity of traditional sand and cement screeds Gypsol HTC is perfect for underfloor heating. Feel free to contact us for further information about Gypsol HTC. #screed #speedscreed #floorscreeding

[email protected] - 0800 242 5589 - www.speed-screed.com Gypsol Classic – General Overview I’m Andy Parkin, Managing Director of the Multi Award Winning Speed Screed, and I’m here today to talk about Gypsol Classic Gypsol Classic is a calcium sulphate based flowing screed Gypsol Classic – Applications Perfect for: Residential/Commercial/Retail/Healthcare buildings Schools Floating, bonded and un-bonded construction Incorporation of electric or wet underfloor heating systems Timber, concrete and steel frame structures Not suitable for: Permanently wet areas, such as commercial changing rooms/swimming pool surrounds Area that require falls Mixing/Supply Gypsol Classic is supplied directly from the screed manufacturer. Supplied in ready-mixed truck mixers. 4/6/8/10 wheelers. The screed is then discharged into a specialist screed pump, and then pumped into place. Drying Times Approximately 1mm per day, up to 40mm. Beyond 40mm, 0.5mm per day. This is based on 20 degrees and 60 relative humidity After 7 days the screed can be forced dried to speed up the process. Foot Traffic 24-48 hours Screed Depths Bonded 25mm Unbonded 30mm Floating 35mm Domestic 40mm Commercial Acoustic 80kg @ 40mm Coverage to conduits 25mm Screed Super Powers – Up to 2000m2 per day productivity – Joints at 30-40 linear meters – Very low shrinkage – Minimal cracking – Will not curl – No need for curing membrane – No reinforcement required – Requires no manual compaction – Eco friendly calcium sulphate binder – Free from protein and does not harbour harmful bacteria. -With nearly twice the thermal conductivity of traditional sand and cement screeds, Gypsol Classic is perfect for underfloor heating. Feel free to contact us for further information about Gypsol Classic. #screed #speedscreed #floorscreeding

[email protected] - 0800 242 5589 - www.speed-screed.com Garage Floor Screed I’m Andy Parkin Managing Director of the Multi Award Winning Speed Screed. I’m here today to talk about which is the Best Garage Floor Screed. When we talk about garage floor screed, there are a few different situations where screed is used. New Build When working with a new build, the garage floor screed will generally be structural concrete. The garage floor will always need a structural substrate. A simple concrete floor will provide that requirement. Normally delivered in a ready-mix truck mix, laid to a slight fall. The surface needs to be a wearing surface, if no floor covering are to be laid, and again structural concrete will perform to resist surface abrasion. Overlay If the current Garage Floor Screed needs an overlay, perhaps to level, or repair, then we are generally looking at a thin Levelling Compound. Any cracks should be repaired before the compound is laid, a two-part epoxy resin should be suitable. A bonding agent would need be applied to the substrate before the screed is laid. The substrate should be clean, dry, no contamination, and sound condition. The surface may need to be mechanically prepared before bonding. All those elements need to be considered to ensure the product will bond to the substrate. If the ongoing use is still that of a typical garage, the levelling compound needs to a one capable of being a be wearing surface. Instarmac Level IT Top can be laid up to thickness of 15mm. Change Of Use If the use is changing to a living area, no longer needs to be a wearing surface, needs levelling to take the fall out of the floor, and perhaps underfloor heating installed? Then the garage floor screed needs to be thicker, ideal products to go over Underfloor Heating are: • Gypsol HTC – Flowing screed, 20mm only above the pipe • Gyvlon Thermio+ – Flowing screed, Great Thermal Conductivity • Topflow screed C Belitex – Flowing screed, fast drying • Mapescreed 704 – Sand and Cement, Fast Drying • Retanol Xtreme – Sand and Cement, Super-Fast Drying I hope this has been a help when searching for the Best Garage Floor Screed, if you have any questions please get in touch. #screed #speedscreed #floorscreeding

Trending Blogs

Recently Viewed Blogs

Speed Screed Limited