Starlink installations @starlinkinstallations - Tumblr Blog

Starlink Installation Macclesfield Forest, Generation 3, Space Internet Solutions.

This was the new Starlink Generation 3 system and was being fitted in Macclesfield Forest, due to the shut down of the Vispa repeater internet system which at the best of time producing speeds of 20mbs when it was working there was now no alternative but to fit Starlink as no BT and no mobile coverage.

The house was very remote and half way up a hillside and surrounded by trees so again we had to fit up on the chimney, we used a galvanised chimney bracket and alloy mast, using our own all aluminium Starlink Gen3 pole mount adapter we can have the peace of mind that come the hogh winds of winter this will stay put, the cable was routed into th3 kitchen area.

After configuring the Starlink router and aligning the dish speeds were coming in at 310mbs so a very happy customer, the Vispa router was swapped with a network switch and everything back online.

For more info or to book an installation in Macclesfield Forest.

www.spaceinternetsolutions.com/starlink-installation-macclesfield-forest

#starlink #starlinkinternet #starlinkinstallation #spaceinternetsolutions #macclesfieldforest

Starlink Installation Atherton, Space Internet Solutions.

Here is a Starlink installation carried out by Andy and Ethan in Atherton for a new build property suffering with slow internet speeds that could not deliver for this modern property.

This home had just been built and had all the modern amenities with cctv, access points throughout the property and a couple of game systems that needed a good reliable connection. Currently supplied by a BT copper line and no chance of fibre in the next few years the only real option was Starlink as mobile networks sketchy and no Virgin.

Customer had ordered the Starlink taking the offer of the actuated kit for £150.00 and then rang us up for an installation, unfortunately we had to use our spare 150 foot cable so the Starlink dish could be installed on the back of property using a galvanised wall bracket and alloy mast to ensure no rust marks on the render, the cable was routed into a comms room, router configured updated and speeds now coming in at 240mbs so more than enough.

For more info or to book an installation in Atherton feel free to get in touch.

www.spaceinternetsolutions.com/atherton

#starlink #starlinkinternet #starlinkinstallation #spaceinternetsolutions #atherton

Starlink Installation Matlock, Generation 3, Space Internet Solutions

Here is an installation carried out by Andy and Ethan in Matlock, Derbyshire for a remote farmhouse with terrible internet connectivity.

The house was over 3 different levels and areas with the main house, another property attached which was shared and also a holiday let to the rear all 3 properties had a separate BT connection with approx 10 BT discs, nothing worked so it was time for an upgrade. Initially got in touch and sent some pictures over for some advice, he ordered the kit and we arranged the visit.

There was a line of site issue with lots of obstructions due to trees so we opted for a chimney, fitted up using a galvanised chimney lashing and 2 inch alloy pole which fits onto our own all aluminium Pole mount adapter, we can guarantee this will stay in place when the next gales arrive in the Autumn.

The cable was fitted into the office room and speeds were coming in at 320mbs so very impressed with the results.

We then set 6 TP Link x55s up and set them up around the whole property and even at the furthest location we were hitting above 100mbs.

Customer now can cancel all his BT services and save money in the long run and got fantastic coverage with speed to match.

For more info or to book an installation in Matlock feel free to get in touch.

www.spaceinternetsolutions.com/matlock

For sales of Pole mount adapters

www.spaceinternetsolutions.com/generation-3

#Starlink #starlinkinternet #starlinkinstallation #spaceinternetsolutions #matlock #generation3

Starlink Installation Thirsk, Generation 3, Space Internet Solutions

Here we have a Starkink Generation 3 system fitted in Thirsk, North Yorkshire for a remote property with terrible Internet issues.

The customer for this installation lived about a mile from the nearest road and BT couldn’t supply internet above 1mbs, he then had boundless system which wasn’t any good and also a Vodafone router with nothing above 5mbs time for a change.

Ordered the Starlink system Generation 3 and contacted us for an installation, he had however mentioned how exposed and remote his property actually was, we explained the mounting options and went along with our system.

Dish was fitted up on a galvanised wall bracket and a 2 inch alloy mast and connected to the dish using our aluminium Pole mount adapter, absolute rock solid installation.

Speeds were up at 310mbs so customer more than happy and can cancel his other 3 providers.

For more info or to book an installation

www.spaceinternetsolutions.com/thirsk

To order a Starlink gen 3 Pole adapter for DIY

www.spaceinternetsolutions.com/generation-3

#Starlink #starlinkinternet #starlinkinstallation #spaceinternetsolutions #Thirsk #northyorkshire #generation3

Starlink Installation Bury, Generation 3, Space Internet Solutions,

Here is a Starlink installation carried out by Andy and Ethan in Bury, Lancashire for a couple living a large terraced property but served with a copper BT Internet which won’t do it for them.

The connection into the house was running at 4mbs which was nowhere near enough to run 2 PS5s plus numerous smart TVs and everything else that a modern home needs.

Customer had ordered the Generation 3 system and rang us to enquire about an installation, we explained the issue of mounting the dish on a pole and happily went along with our mounting solution as part of the install.

Dish was fitted on a galvanised wall bracket a 2inch alloy mast, mounted up and aligned using the app, speeds off this one were coming in at 310mbs which the customer is over the moon with.

From BT 4mbs to a Starlink 310mbs

For more info or to book an installation in Bury feel free to get in touch.

www.spaceinternetsolutions.com/starlink-installation-bury

To order a Starlink Generstion 3 Pole Adapter for a DIY install

www.spaceinternetsolutions.com/generation-3

#Starlink #starlinkinternet #starlinkinstallation #spaceinternetsolutions #bury #lancashire #generation3

Starlink Installation Ulverston, Space Internet Solutions,

Here is a Starlink installation carried out by Andy and Ethan in Ulverston for someone with no Internet connectivity at all.

The customer had been suffering with no internet at all since building his new home and contacted us for a survey to see what could be done, unfortunately no chance due to his home being surrounded by trees, we gave him the option of fitting on neighbours and beaming across.

The neighbours struck an agreement and we installed the Starlink system up on the chimney again due to trees on the neighbours property speed from the Starlink were coming in at 200mbs so very happy neighbour.

We then installed a wireless bridge across from starlink property across to clients property.

Inside we fitted 3 Tp Link X 50 as access points and configured them all, speeds now in that property were coming in at 180mbs so very happy customer.

For more info or to book an installation in Ulverston, or anywhere in the Lake District feel free to get in touch.

www.spaceinternetsolutions.com/ulverston

#Starlink #starlinkinternet #starlinkinstallation #spaceinternetsolutions #ulverston #lakedistrict #cumbria

Starlink installation Helmshore, Space Internet Solutions,

Here is an installation of Starlink fitted by Andy and Ethan for a customer who had been converting an old farm building into a new modern home.

The house was out of the range of all mobile signals and BT also wasn’t available, he needed internet up and running partly for security and a long term solution when he gets to move in.

The Starlink was fitted on the gable and the pole height kept down due it being fitted on a very windy ridge, the cable was routed into the loft space and into what will be a server room on completion, the router was set up and speeds were coming in at 230mbs.

We will be returning to finish of the network system in a couple of weeks and fitting some access points to blanket the home in Wi-Fi.

For more info or to book an installation in Helmshore feel free to get in touch.

www.spaceinternetsolutions.com/helmshore

#Starlink #starlinkinternet #starlinkinstallation #helmshore #spaceinternetsolutions

Starlink Installation Kirkham, Space Internet Solutions.

Here is a Starlink Installation carried out by Andy and Ethan in Kirkham, Lancashire for nursing home with terrible internet.

Current supply was to the nursing home with a speed of 10mbs from BT which was not enough to go the distance, between the nursing home and house there was an armoured Ethernet cable which fed the same BT connection but with only about 2mbs getting through.

We installed the Starlink on the house using a galvanised wall bracket and alloy mast with the cable routed into the office room. Speeds were coming in at 230mbs so very happy customer at last.

We will return in a couple of days setup the Ethernet adapter and then reconfigure everything so the Starlink internet is fed back to the nursing home.

The customer can now get rid of the 2 lines supplied by BT.

For more info or to book an installation feel free to get in touch.

www.spaceinternetsolutions.com/kirkham

#starlink #starlinkinternet #starlinkinstallation #spaceinternetsolutions #kirkham

Starlink Installation Lancaster, Generstion 3, Space Internet Solutions,

Here is a Starlink Generation 3 installed in Lancaster for a client suffering from terrible speeds over copper supplied by BT.

This was a group of houses that were off the full fibre route and relied on the old copper lines which were about 5mbs which wasn’t quite enough for the modern home.

We did an obstruction check on this property but the roof was a very steep pitch and came back to obstructed the only other location was on the front but not the best to look at, we opted for the chimney.

We fitted a cradle bracket on the chimney using a lashing kit with a short mast. We used one of our Aluminium Pole adapters and will ensure a good stable mount in the high winds.

If you are need of a Starlink installation in Lancaster feel free to get in touch

www.spaceinternetsolutions.com/starlink-installation-lancaster

If you wish to purchase a pole adapter for your own Starkink Generation 3 install

www.spaceinternetsolutions.com/generation-3

#Starlink #starlinkinternet #starlinkinstallation #generation3 #Gen3 #lancaster #spaceinternetsolutions

Starlink Installation Mobberley, Space Internet Solutions.

Here is a Starlink installation carried out by Andy and Ethan in Mobberley, Cheshire for a remote property suffering from slow speeds.

The customer was trying to set up an online selling platform business but with no mobile signals and a BT copper 1mbs it was never going to work.

Customer decided to get the Starlink Business to make sure he had the best available, we installed the Starlink dish on a galvanised wall bracket and short alloy mast just enough to give it a clear view, cable was routed into the office room, router was configured and a speed check of 250mbs within 15 mins, very happy customer.

For a Starlink Installation in the Mobberley area feel free to get in touch with us.

www.spaceinternetsolutions.com/starlink-installation-mobberley

#starlink #starlinkinternet #starlinkinstallation #spaceinternetsolutions #mobberley #cheshire

Starlink Installation Chester, Generation 3, Space Internet Solutions.

Here is a new installation of the Starlink Generstion 3 carried out for a buisiness premises on the outskirts of Chester as a replacement to the old copper BT feed into the building.

The existing connection provided by BT was 3mbs which wasn’t enough to run a part online business, no other option available so opted for Starlink to do the job.

Installation was a straightforward install fitted up on the gable end with a short pole and we used one of our own Generation 3 Pole adapters, cable was routed into the building and speeds were coming in at 300mbs which was plenty.

For more info or to book an installation in Chester area feel free to get in touch.

www.spaceinternetsolutions.com/starlink-installation-chester

#Starlink #starlinkinternet #starlinkinstallation #chester #spaceinternetsolutions

Starlink Installers in Clitheroe, The Starlink Guys

Here is a remote property on the outskirts Clitheroe for a customer who was suffering after moving into this remote property, the installation was carried out by engineers Aaron and Phil.

The property was off grid with no active telephone services and the only bit of internet was coming in from their mobile phones, most of the time they had nothing so Starlink was the answer.

The installation was pretty straightforward with the Starlink being fitted on a galvanised wall bracket and alloy mast, the cable was routed into a loft space and along into the office room, speeds were coming in at 220mbs.

Aaron and Phil are returning to hardwire the 2 Sky boxes over Cat6 along with a mesh and get everything on the one network.

For more info or to book an install of Starlink Gen 2 or 3 feel free to get in touch.

www.spaceinternetsolutions.com/starlink-installation-clitheroe

#Starlink #starlinkinternet #starlinkinstallation #generation3 #generation2 #spaceinternetsolutions #clitheroe #lancashire

Starlink Installation Altrincham, Generation 3 installation.

Here is a Gen 3 Starlink installation for a customer who lives in a large home with a lot of smart internet base equipment that was being pushed to the limit with the terrible speeds offered by again BT.

The installation carried out to upgrade from a BT copper 5 mbs was done by Andy and Ethan, the house was a large detached modern building, the house was also wooded on one side. After provisionally speaking to the customer he agreed to order the longer cable as was needed to clear the trees. The server / garage room was at the other side of property, so we ran the cable through the gutterings to the original pole already installed with sat dish and aerial. We dropped the aerial further down the pole and seated the Starlink Gen 3 up on the mast using our own pipe adapter www.spaceinternetsolutions.com/generation-3, we aligned the dish using the App and a phone call as again out of range from router, speeds were coming in at 260mbs.

For more info or to book an installation in Altrincham feel free to get in touch.

www.spaceinternetsolutions.com/altrincham

#starlink #starlinkinternet #starlinkinstallation #spaceinternetsolutions #generation3 #Gen3 #altrincham #cheshire

Starlink Installation Chelford. The Starlink Guys

Here is a Starlink Installation carried out for a remote terrace property that was suffering with a BT speed of 2mbs which wouldn’t really cut as he enjoys playing on ps5 so the online experience was zero.

We installed the Starlink dish on a galvanised wall bracket and alloy mast with the Starlink being kept behind the Sky due to the interference caused to the satellite.

The cable was routed into the bedroom and router configured, speeds were coming in at 240mbs so customer over the moon with results and can now join the online gaming world.

The Starlink router did the job and Wi-Fi was available throughout the property.

For more info or to book an installation in Chelford feel free to get in touch.

www.spaceinternetsolutions.com/chelford

#starlink #starlinkgeneration3 #starlinkinternet #starlinkinstallation #spaceinternetsolutions #chelford #cheshire

#starlink #starlinkukinstaller #generation 3 #chelford

Starlink Installation Stafford, Space Internet Solutions

Here is an installation of Starlink in Stafford for a new build modern home with no BT line availability, mobile signals at this location were also sketchy so ordered Starlink to give him a good Broadband experience.

The starlink was fitted by Andy and Ethan using the customer bought official pivot mount where in this case worked well and blended in with the building, we routed the cable into a server room and finished off some of the Network points for the customer.

Speeds were coming in at 220mbs so happy with that and even customers phone worked on Wi-Fi calling so he can at least use his mobile, good result.

For more info or to book a Starlink Installation in Stafford feel free to get in touch.

www.spaceinternetsolutions.com/starlink-installations-stafford

#Starlink #starlinkinternet #starlinkinstallation #spaceinternetsolutions #stafford

Starlink Installation Pott Shrigley, Generation 3, Space Internet Solutions.

Here is a Starlink installation carried out in Pott Shrigley for a remote property currently being served by Vispa but this was to be terminated due to the lack of subscribers usually down to an unreliable service, there was no other available services except BT over copper which wasn’t going to cut it, got in touch with us and ordered the new Generation 3 system.

We installed the Starlink dish up on a galvanised wall bracket and short alloy mast, using our own heavy duty pole mounting system to attach to the gen 3 dish, cable was routed into the loft space and back down into an office room.

The speeds from the Starlink were coming in at 250mbs so customer can finally watch Netflix etc and all the streaming services they couldn’t do with Vispa.

For more info or to book an installation in Pott Shrigley feel free to get in touch.

www.spaceinternetsolutions.com/pott-shrigley

#Starlink #starlinkinternet #starlinkinstallation #starlinkgeneration3 #Gen3 #spaceinternetsolutions #pottshrigley #macclesfield #cheshire

Starlink Installation Blackburn, Generation 3, Space Internet Solutions

Here is a new installation of Starlink for a client who was very remote on the outskirts of Blackburn, current supplier of Boundless wasn’t living up to their promises, after numerous visits and nothing fixed it was time for change, after a discussion with us she decided to order Starlink.

The customer had ordered the latest generation 3 Starlink system, we explained the pole mounting options from Starlink who actually state not to use theirs in a windy location, and the downside of using plastic type adapters that flex, we sent her a quick video so she would understand what she was getting from us using our own Gen 3 Pole mount.

The dish was fitted using a 2 inch alloy mast on a wall bracket and attached to the dish with our adapter, dish was aligned using the app ( pain in the a##e ) when too far away to connect to app for alignment tool.

Router was configured and speeds were coming in at 250mbs, happy customer with a good solid installation for a remote location.

For more info or to book an installation feel free to get in touch.

www.spaceinternetsolutions.com/starlink-installation-blackburn

#Starlink #starlinkinternet #starlinkinstallation #starlinkgen3 #generation3 #spaceinternetsolutions #blackburn #lancashire

Trending Blogs

Recently Viewed Blogs

Starlink installations