supergizmo88

[supergizmo88-blog]

TC20 & RFD2000 (SKUs)

SKU# RFD2000-1000100-EU (UHF RFID SLED FOR RFID VERSION OF TC20, EU/ETSI FREQUENCY BANDS)

SKU# CRD1S-RFD2000-1R (1-SLOT CHARGING CRADLE FOR RFD2000 AND/OR TC20)

SKU# PWR-BGA12V50W0WW (Level VI AC/DC Power Supply Brick. AC Input: 100-240V, 2.4A. DC Output: 12V, 4.16A, 50W)

SKU# CBL-DC-388A1-01 (DC Line Cord for running the single slot cradles or battery chargers from a single Level VI power supplyPWR-BGA12V50W0WW)

SKU# 50-16000-220R (AC Line Cord, 1.8M, grounded, three wire CEE 7/7plug)

SKU# CBL-TC2X-USBC-01 (TC2X Value USB C Cable)

SKU# Z1AV-TC2RF2-2000 (2 YEAR ZEBRA ONECARE SV. PURCHASED WITHIN 30 DAYS. DOES NOT INCLUDE COMP COVERAGE FOR THE TC20 AND RFD2X)

[supergizmo88-blog]

Zebra MP7000 & OPOS Communication

What hardware? MP7000 and serial cable SKU # CBA-R51-S16ZAR (SERIAL DB9-F 5M CABLE)

What software? Zebra Scanner SDK for Windows (includes OPOS driver & test utility)

Hardware setup - Connect one end of the serial cable to the POS connector of the MP7000 and the other end to the serial COM port of the host.

Software setup

Install Zebra Scanner SDK for Windows onto the host POS

Modify file C:\Program Files\Zebra Technologies\Barcode Scanners\Common\Config.xml

Note. the value of id is the COM port used to communicate with the MP7000 on the host POS.

Modify Windows registry as shown below

Note. the Port value is the COM port used to communicate with the MP7000 on the host POS.

Restart the CoreScanner service

Activate the Simple Serial Interface (SSI) protocol by scanning the barcode below

Locate C Sharp Sample & Scanner OPOS applications. They come installed as part of the Zebra Scanner SDK for Windows.

Verify the MP7000 is correctly listed in the C Sharp Sample app.

Exit C# Sample and launch Scanner OPOS Sample. Select Zebra_Scanner as Service Object in the list.

Then button Open and make sure the return code values are OPOS_SUCCESS.

From this step, buttons Claim - Device Enable - Auto Enable - Decode Data followed by a scan of an item.

Date of the post: 2018-08-30

[supergizmo88-blog]

How to install Telnet Service on Ubuntu 16.04

1 - sudo apt-get install xinetd telnet 2 - sudo vim /etc/xinetd.d/telnet

3 - sudo systemctl restart xinetd.service 4 - netstat -an | grep LISTEN

Done!

[supergizmo88-blog]

How to set up MySQL for remote access on Ubuntu Server 16.04

[supergizmo88-blog]

DS3678 & RS232 direct Connection

Ref. CBA-R07-S07PAR Description. CABLE - RS232: DB9 FEMALE CONNECTOR, 7 FT. (2M) STRAIGHT, TXD ON 2 (REQUIRES 12V POWER SUPPLY)

Ref. STB3678-C100F3WW Description. Standard Cradle For 3678 Family, Charger, Bluetooth And Multi Interface

Ref. PWR-BGA12V50W0WW Description. Level VI AC/DC Power Supply (Brick). AC Input: 100-240V, 2.4A. DC Output: 12V, 4.16A, 50W. Requires: DC line cord and Country specific AC grounded Line Cord

Ref. CBL-DC-451A1-01 Description. DC line cord with filter used with 3600 series level 6 AC/DC Power Supply Part# PWR-BGA12V50W0WW

April 07th 2017

[supergizmo88-blog]

RS507 & FNC1 (GS) in EAN128 & DATAMATRIX barcodes

123Scan2 utility is needed in order to set up RS507 bluetooth scanner to convert FNC1 (ascii GS caracter) found in EAN128 & Datamatrix barcodes.

Below is a screenshot showing how to convert any GS (ascii 0x1d) in - (ascii 0x2d) using Advanced Data Formating features of 123Scan2. 

[supergizmo88-blog]

Zebra’s ET5x Tablets

Windows OS/Wi-Fi/8″ or 10″ Screen Size 

ET50NE-W22E 8.3” Display, Win10, Intel Z3795, 4GB RAM, 64GB Flash, WLAN Only

ET50NT-W22E 10.1” Display, Win10, Intel Z3795, 4GB RAM, 64GB Flash, WLAN Only

Windows OS/WWAN/8″ or 10″ Screen Size

ET55RE-W22E 8.3” Display, Win10, Intel Z3795, 4GB RAM, 64GB Flash, Rest of World WAN

ET55RT-W22E 10.1” Display, Win10, Intel Z3795, 4GB RAM, 64GB Flash, Rest of World WAN

Android OS With or Without Google Services/Wi-Fi/ 8″ or 10″ Screen Size

ET50PE-G15E-00A6 8.3" Display, Rest Of World Wlan 802.11ac, Android L Gms, Z3745, 2Gb Ram, 32Gb Flash, English

ET50PE-L15E-00A6 8.3" Display, Rest Of World Wlan 802.11ac, Android L Non-Gms, Z3745, 2Gb Ram, 32Gb Flash, English

ET50PT-G15E-00A6 10.1" Display, Rest Of World Wlan 802.11ac, Android L Gms, Z3745, 2Gb Ram, 32Gb Flash, English

ET50PT-L15E-00A6 10.1" Display , Rest Of World Wlan 802.11ac, Android L Non-Gms, Z3745, 2Gb Ram, 32Gb Flash, English

Android OS With or Without Google Services/WWAN/8″ or 10″ Screen Size

ET55TE-G15E-00A6 8.3" Display, Emea/Apac Only Wan/Wlan 802.11ac, Android L Gms, Z3745, 2Gb Ram, 32Gb Flash, English

ET55TE-L15E-00A6 8.3" Display, Emea/Apac Only Wan/Wlan 802.11ac, Android L Non-Gms, Z3745, 2Gb Ram, 32Gb Flash, English

ET55TT-G15E-00A6 10.1" Display, Emea/Apac Only Wan/Wlan 802.11ac, Android L Gms, Z3745, 2Gb Ram, 32Gb Flash, English

ET55TT-L15E-00A6 10.1" Display, Emea/Apac Only Wan/Wlan 802.11Ac, Android L Non-Gms, Z3745, 2Gb Ram, 32Gb Flash, English

[supergizmo88-blog]

MC32 internal barcode scanner + RS507 Bluetooth

On MC32, change Microsoft Bluetooth stack to StoneStreetOne HKLM\Software\SymbolBluetooth\SSStack=1

Prevent the Confirm Connection’s window to popup on a WARMBOOT HKLM\Software\Stonestreet One\BTExplorer\Config\SecureSimplePairingOptions=3

WARMBOOT MC32

Display MC32′s Pairing Barcode Start > Program > BTUI > Pairing Barcode

Pair RS507 in SPP mode & MC32

Modify MC32′s DataWedge Advanced Configuration > Profiles > Profile0 > Input > Serial >COM5:BT Serial > Enabled Advanced Configuration > Profiles > Profile0 > Input > Serial >COM5:BT Serial > Send After > Timeout > Time = 100ms Advanced Configuration > Profiles > Profile0 > Input > Serial >COM5:BT Serial > Feedback > OnData > Beeper > Enabled Advanced Configuration > Profiles > Profile0 > Input > Serial >COM5:BT Serial > Feedback > OnData > Volume = 1 Advanced Configuration > Profiles > Profile0 > Routes > Add New > Route 1 Advanced Configuration > Profiles > Profile0 > Routes > Route1 > Input > Plugin = Serial

Verify now that barcodes scanned either by RS507 or by internal scan engine of MC32 show up correctly in the current application i.e WordPad

[supergizmo88-blog]

MC32′s programmable application function keys

Green programmable application key = 007d Red programmable applicaion key = 007e

[supergizmo88-blog]

Symbol MC91xx IE in full screen mode (Windows CE 6.0)

[HKEY_CURRENT_USER\Software\Microsoft\Internet Explorer\Main] "Task Bar"=dword:00000000 "Status"=dword:000000000 "Command Bar"=dword:00000000 "Animation"=dword:00000000 "Menu Bar"=dword:00000000 "URL"=dword:0000000 "SBSizeV"=dword:0000000 "SBSizeH"=dword:0000000

[supergizmo88-blog]

How to disable the auto zoom of IE in Windows Embedded Compact 7

Modify the following registry keys

[HKEY_CURRENT_USER\ControlPanel\SIP] "TurnOffAutoDeploy"=dword:1

[HKEY_CURRENT_USER\Software\Microsoft\Internet Explorer\Gesture] "GestureCapabilities"=dword:00000710

[HKEY_CURRENT_USER\Software\Microsoft\Internet Explorer\EditActivation] "EnableEditActivation"=dword:00000000

[supergizmo88-blog]

Symbol WT41N0* &  Useful Settings

Q - How to cancel the auto launch of App Launcher?

A - Modify registry keys as follow:

[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\SVCStart\1]"Default"="AppLauncher_.exe" [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\SVCStart\1\Configurations\Display]"Default"="AppLauncher_.exe"

Q - How to prevent a paired RS507 ring scanner to disconnect after 10 minutes of inactivity?A - Change WT41N0's DataWedge settings as follow: Basic Configuration > 1-Scanner Input > 2-Bluetooth SSI Scanner Driver > 6-Interface Params > 4-Connection Idle Time = 0

Basic Configuration > 1-Scanner Input > 2-Bluetooth SSI Scanner Driver > 6-Interface Params > 5-BT Disconnect On Exit = Uncheck

Q - How to prevent the Confirm Connection window to show up after a warmboot?

A - Change the value of the following registry:

[HKLM\Software\Stonestreet One\BTExplorer\Config]”SecureSimplePairingOptions”=dword:03

Q - How to change the screen orientation? A - Change the value of the following key registry: HKLM\Drivers\Display\Primary\Angle=3 HKLM\Drivers\Display\Primary\Angle=5

Note*. With BSP v03.54.10

[supergizmo88-blog]

Zebra Enterprise Browser

With Zebra Enterprise Browser (EB), a developer can write an enterprise application in HTML/JavaScript/CSS with access to a Zebra Mobile Computer’s hardware such as camera, wifi interface, barcode scanner, battery...more.

A demo version is available for download here.

If you have a Zebra MC40 running Android v4.4.4 (KK) you can run Feature-Demo app provided with the download which demonstrates EB v1.3.17 features.

Installation

1-Copy folder Feature-Demo from the laptop computer to device’s folder /storage/sdcard0/www.

2-Modify line 125 of Config.xml in folder/storage/sdcard0/Android/data/com.symbol.enterprisebrowser to be <StartPage value="file:///storage/sdcard0/www/Feature-Demo/feature-demo.html" name="Demo"/>

3-You are done! Launch EB and it will run Feature-Demo.

[supergizmo88-blog]

How to configure Zebra QLn420 printer with an EAP-TLS wireless profile

What you need: -QLn420 mobile printer running at least firmware v68.19.13Z -Zebra Setup Utilities v1.1.9.1187 -Client certificate in P12 format with its password (if it is password protected) and user's name -Root certificate authority (CA) in DER or PEM format -SSID of the Wi-Fi network

-With ZSU we first reset the printer’s WLAN settings to factory default. Then we set its RTC to current time & date (MM-DD-YYYY). Printer will reboot afterwards.

! U1 do "file.delete" "E:CACERTSV.NRD" ! U1 do "file.delete" "E:PRIVKEY.NRD" ! U1 do "file.delete" "E:CERTCLN.NRD" ! U1 do "device.restore_defaults" "wlan" ! U1 setvar "rtc.date" "01-04-2016" ! U1 setvar "rtc.time" "11:19:00" ! U1 do "device.reset" ""

Once the QLn420 has rebooted, we can now enter in ZSU Wi-Fi’s parameters for EAP-TLS.

In the picture below “John” is the user’s name of the client certificate.

In the picture below “ZebraAP6511″ is the password (if any) used to install the client certificate P12.

Put the certificate authority ca.der in CA Certificate field and client certificate John.p12 in Client Private Key field.

After this last step the QLn420 printer will reboot and will start “to talk” to the radius server thru a Wi-Fi access point. If the authentication is successful the printer will get an IP address and it should be connected to the WLAN network.  

[supergizmo88-blog]

Installing Java and NetBeans IDE on Ubuntu Desktop 14.04

1-Download jdk-7u79-linux-x64.tar.gz 2-tar zxvf jdk-7u79-linux-x64.tar.gz 3-Add in /etc/profile JAVA_HOME=/home/gizmo/jdk1.7.0_79 PATH=$PATH:$JAVA_HOME/bin export JAVA_HOME export PATH

4-Download netbeans-8.1-javase-linux.sh 5-chmod +x netbeans-8.1-javase-linux.sh 6-./netbeans-8.1-javase-linux.sh

[supergizmo88-blog]

Installing Redis on Ubuntu Desktop 14.04

tar zxvf redis-3.0.6.tar.gz make make test

modify tcp-backlog to 120 in redis.conf enable maxclients to 100 in redis.conf

add vm.overcommit_memory=1 in /etc/sysctl.conf

sudo reboot

sudo apt-get install hugepages sudo hugeadm --thp-never

redis-server redis.conf