KRS

[suzhoukrs]

Introduction of traditional clothing fabric printing process 3

Scent printing process

The fragrance printing process is a special process that uses a special process to make the printed fabrics have fragrance. The processing technology of fragrance printing is similar to the usual printing process, except that when the prepared fragrance microcapsules are mixed with a suitable adhesive paste, as long as the fragrance microcapsules, the adhesive printing color paste, and the printing fabric are relatively compatible. Good compatibility can be used. The printing paste is applied to the surface of the fabric by screen printing and then dried. It not only makes people enjoy the beauty in sight but also enjoys pleasant satisfaction in smell. This product was initially limited to printed fabrics, but due to its popularity among consumers, it has gradually developed to be used in various textiles such as clothing, bed sheets, handkerchiefs, socks, and scarves. At present, the concept of scent printing has been promoted to "scent printing" over time, because it is not just the pursuit of the effect of producing scent. It also contains a variety of breaths of nature. Such as forest breath, pine resin breath, pea flower breath, and so on. The characteristics of these breaths are similar to those of nature, which make people feel happy and return to nature.

The principle of the fragrance printing process is to use liquid fragrance or other organic solution so that the fragrance can be uniformly mixed with the colored printing dope slurry and fixed on the fabric by the action of the adhesive in the coating. Because the organic components contained in the essence are many, volatile and chemically unstable compounds, the composition of the essence is very complex, and it is easy to volatilize and lose or decompose and deteriorate during use and storage. Therefore, the preservation and controlled use of flavors has become a key issue in research and development. To protect the essence from the influence of external environmental factors, and to control or extend its fragrance release period to achieve the purpose of people's use of the fragrance, the best way is to microencapsulate the essence. or liquid coating technology that enables the formation of tiny particles.

Hot stamping and silvering process

Bronzing and silvering is a traditional method of beautification and beautification and is often used in many paper packaging, while silk-screening and silvering is a new type of process. Beautiful gold and silver and the color sample is durable and does not fade. It can be printed on many kinds of fabrics, and the cost is lower than the traditional process. It is a very ideal printing and decoration process.

The golden printing paste of crystal coating material takes a special crystal as the core and covers the gloss enhancement layer, titanium film layer, and metallic luster deposition layer. It can be exposed to the air for a long time without darkening and has good weather resistance and high-temperature resistance, feel good after printing. At present, the silver light printing paste with mica coating improves the durability of aluminum powder. The mica coating silver printing paste is similar to the mica titanium pearlescent printing paste, that is, the temperature continues to increase when the titanium film is coated. , can obtain the same light as silver, the thickness of the titanium film coating is different, and it can diffract the silver light of different colors. Mica-coated silver printing paste has good compatibility with chemicals. After printing on the fabric, the fastness is also very good, and the silver light can be maintained for a long time.

SUZHOU KRS is an industrial and trade-integrated printed fabric manufacturer, which started in 2012. SUZHOU KRS has accumulated rich production experience and technology in this field. Widely used in shoe material, high-end luxury car interiors, fashion fabrics, and so on. Spandex polyamide full dull cross stripe is one of our products, you can click to view more details.

NO:

JA-JQ-B006

CONT

77% Polyester 23% elastic

GSM/WIDTH：

280g/m2*150cm

Weaving process：

Warp knitting

USE:

Swimwear/underwear/sportswear/yogawear/bodyfitting wear/sports equipment/home textitle ect.,

If you are interested in our products, please contact us as soon as possible.

Related news of Warp knitted fabric

What is digital printing? What are the characteristics?

What kind of fabric is suede? What are the advantages?

[suzhoukrs]

Introduction of traditional clothing fabric printing process 2

Photochromic printing

Photochromic printing is also known as photochromic printing. Early photochromic printing used photochromic dyes. Under the irradiation of ultraviolet rays, the structure of the dyes changed, showing different colors. For example, dye A is colorless. After being irradiated by ultraviolet light, the molecule opens into a dye B with a cyanine structure, which is blue. When dye B is exposed to visible light, it will re-convert to a colorless dye A.

At present, microcapsule technology is used to coat the photo variable dye in the capsule, and the general particle size is 1-10 microns. The light fastness of the photo variable dye coated with the microcapsule is greatly improved. At present, photo-variable dyes have been developed to have 4 basic colors: purple, blue, yellow, and red. The initial structures of these 4 photo-variable dyes are closed-loop types, that is, there is no color and luster printed on the fabric, but under the irradiation of ultraviolet light Can turn purple, blue, yellow, or red. The so-called photochromic changes from one color to another, which is to print after mixing the photochromic dye and the general color paint in the printing color paste. For example, after printing with light-changing dye red and paint blue, it appears blue on the surface of the fabric and turns blue-violet under ultraviolet light.

Thermochromic printing

Thermochromic printing is also known as thermochromic printing. Early thermochromic printing used thermochromic dyes to process microcapsules and then print them on fabrics. It has two types: reversible and irreversible. Irreversible thermochromic dyes are generally used as temperature detection indicators. It is generally reversible when used in textiles. According to its structure, it can be divided into two categories: inorganic and organic. Organic thermochromic dyes are widely used in textiles. They are composed of leuco dyes, color developers, and sensitizers (desensitizers).

At present, thermochromic dyes have developed into 15 basic colors, and each color can be mixed, the color spectrum is complete, and can also be mixed with color paints, so thermochromic dyes can not only change from colored to colorless but also can From one color to another, the temperature residence time of discoloration is also becoming more and more sensitive.

Water change printing process

The water-changing printing process is the newest. Using a variety of physical and photochemical principles, products are produced by this process. When the fabric enters the water, the raw materials and water on the fabric undergo instantaneous complex changes, presenting a rich preset pattern. When the water on the surface of the fabric evaporates, the original pattern appears again. This process can be widely used in the printing design of beach pants, swimming suits, raincoats, umbrellas, large signboards, advertisements, and many other media to produce "magic color-changing swimsuits". "Magic Color-changing Umbrella" and a series of ever-changing and amazing color-changing products have an extremely broad market.

Fluorescent printing process

The fluorescent printing process is a new type of special printing process. The principle is to use a special process to integrate the photo-storage self-luminous material into the fabric and realize the automatic light-emitting function by absorbing various visible lights. Its characteristic is that it can be used indefinitely. The product does not contain any radioactive elements, can be used for various purposes, and is evenly distributed in various transparent media, such as plastics, ceramics, glass, etc., to achieve the self-luminous function of the medium, and can display the bright color of this pigment, showing good of low-level emergency lighting, signage, and decorative landscaping.

In terms of technology, there are: printing process of fluorescent coatings, direct printing of fluorescent coatings and common coatings, direct printing of fluorescent coatings and reactive dyes, color discharge printing of reactive dyes, and phthalocyanine resist printing.

SUZHOU KRS is an industrial and trade-integrated printed fabric manufacturer, which started in 2012. SUZHOU KRS has accumulated rich production experience and technology in this field. Widely used in shoe material, high-end luxury car interiors, fashion fabrics, and so on. Elastic spandex warp with nylon is one of our products, you can click to view more details.

NO:

JA-JQ-B004

CONT

77% Polyamide  23% elastic

GSM/WIDTH：

180g/m2*150cm

Weaving process：

Warp knitting

USE:

Swimwear/underwear/sportswear/yogawear/bodyfitting wear/sports equipment/home textitle ect.,

If you are interested in our products, please contact us as soon as possible.

Related news of Warp knitted fabric

Advantages and applications of warp knitted mesh fabrics

Several operating methods of fabric printing that you don't know 1

[suzhoukrs]

Introduction of traditional clothing fabric printing process 1

Water slurry printing process

The water slurry printing process is the most basic in the screen printing industry. It can be printed on almost all light-colored fabrics, such as cotton, polyester, linen, etc., and is widely used. It works similarly to dyeing, except that it "dyes" an area of the fabric to the desired color for the flower position. Therefore, this process cannot be applied to dark-colored fabrics. The biggest advantage of the water slurry printing process is that it is widely used, has good flower fastness, and can print good results at a relatively low price. The limitation of the water slurry printing process is that it cannot be applied to all dark fabrics.

Glue printing process

The mucilage printing process uses a special chemical gel to mix with dyes for a high degree of seamlessness. The dye is firmly attached to the fabric through the medium of the gel, and the glue printing process overcomes the limitations of water-based printing. Its characteristics are that it is suitable for printing of various color depths and materials. It can be printed on cotton, linen, viscose, polyester, nylon, polypropylene, polyvinyl, and other blended fabrics of various fibers, and can also be printed on leather, artificial leather, and other materials. It can be used for fluorescent printing, inkjet printing, burnt-out printing, electrostatic flocking printing, and other printing processes. The biggest advantage of the glue printing process is that it has a wide range of applications, beautiful colors, and a high degree of reduction. Still, its printing process is more complicated than the water slurry printing process and the cost is relatively high.

Foam printing process

Foam printing is also known as three-dimensional printing. The foam printing process is developed based on the mucilage printing process. Its principle is to add a certain proportion of chemical substances with a high expansion coefficient to the mucilage printing dye. After drying, it is foamed at a high temperature of 200-300 degrees to achieve a three-dimensional effect similar to "relief". The foam printing process can make high, medium, and low foaming effects according to the requirements of the substrate, which is very eye-catching. The biggest advantage of the foam printing process is that the three-dimensional effect is strong, and the printing surface is prominent and expanded. Widely used in cotton, nylon, and other materials.

Flocking printing process

The electrostatic flocking printing process is one of the three-dimensional printing processes. The principle is to transfer the high-strength compound resin adhesive brightener to the surface of the substrate with a screen containing the desired pattern, and then charge the fiber fluff through a high-voltage electrostatic field of hundreds of thousands of volts. Make the fluff "hit" vertically and evenly on the adhesive, "lay" a layer of fluff on the surface of the fabric, and then cure it at a high temperature. It is widely used in sofa fabrics, packaging boxes, shoe fabrics, decoration, toys, industrial electrical device protection, and so on. The fluff is covered on the surface of the object, which is not limited by the shape and size of the plants. The products printed by the flocking process have three-dimensional solid effects, bright colors, soft hand feeling, no fluff, and abrasion resistance. Cotton, silk, leather, nylon, all kinds of PVC, denim, rubber, sponge, metal, foam, plastic, resin non-proof cloth, etc. can be printed.

SUZHOU KRS is an industrial and trade-integrated printed fabric manufacturer, which started in 2012. SUZHOU KRS has accumulated rich production experience and technology in this field. Widely used in shoe material, high-end luxury car interiors, fashion fabrics, and so on. Warp knitted high elastic plain PBT is one of our products, you can click to view more details.

NO

DT-SK-T001

INGREDIENTS AND CONTENT

520% Poly 48%PBT

GSM/WIDTH

230GSM/60" inch

WEAVING PROCESS

Warp knitting

USE

Swimwear/underwear/sportswear/yoga wear/body fitting wear/sports equipment/home textile etc.,

If you are interested in our products, please contact us as soon as possible.

Related news of Warp knitted fabric

Performance Advantages Of Spandex Warp Knitted Fabrics

Features and purchasing skills of warp knitted polyester fabrics

[suzhoukrs]

What is the principle that clothing fabrics can repel insects

Anti-mosquito finishing textile is a new functionalized fabric product. It is made by using an anti-insect finishing agent using fabric finishing. The anti-insect finishing agent is nano-scale microcapsules mainly composed of pyrethroids. It forms an insect repellent film on the surface of the fabric through the fixing agent, which has an efficient and fast knockdown and killing effect and a good repelling effect on mosquitoes, flies, fleas, lice, and borers.

The principle of deworming

Female mosquitoes need to suck blood to lay and breed eggs. They have a sensitive sense of smell and are very sensitive to volatiles such as carbon dioxide and lactic acid produced by human respiration and metabolism. They can rush directly to the blood-sucking target from 30m away.

Studies have shown that when mosquito repellent is applied to the bare skin of the human body because the repellent has an odor that mosquitoes dislike, mosquitoes are reluctant to stop in the place containing mosquito repellent, to achieve the effect of mosquito repellent. Another method of mosquito repellent finishing is to finish the textiles so that the pheromone is no longer emitted to the surrounding environment through the fabric, to achieve the purpose of repelling mosquitoes. This method is also called a passive mosquito control system.

Synthetic pyrethroids

Synthetic pyrethroids, also called pyrethroids, are synthetic chemicals similar to natural insecticides secreted by chrysanthemums with longer-lasting effects, registered with the U.S. Environmental Protection Agency (USEPA), and first listed in 1977 as Oeko- TexStandard100 standard certified products, green and environmentally friendly.

Pyrethroids are synthesized by simulating the active ingredients of natural pyrethrum powder in Clawleaf (Pyrethrum). Synthetic pyrethroids are just as effective, longer lasting, and more readily available than natural pyrethroids. Synthetic pyrethroids work by rapidly paralyzing the nervous system of insects, killing them when they come into contact with or ingested by insects, and also have repellent effects. This effect applies to all stages of insect growth, especially the larval stage. Biting mosquitoes and sand flies can die from contact with pyrethroid-treated textiles, or become disoriented so that they cannot bite.

Pyrethroids are not effective when applied to the skin, but are very durable on clothing and soldiers' military equipment. Permethrin is a complex organic compound that, when metabolized by the skin, generates amino acids (simple proteins), carbon dioxide, and water through ester hydrolysis, which are non-toxic and harmless to the human body.

Insect-proof finishing fabrics can be widely used in bed textiles, carpets, mosquito nets, curtains, and other decorative cloths, as well as socks, clothing, other summer textiles, and military textiles. Now at home and abroad, textiles that are often in contact with the human body have been treated with insect repellent, so that they have a more durable anti-mosquito effect. This method is simple to operate, easy to use, and has mature technology. After a long period of production practice, it has been proved that it has a good mosquito repellent effect, is resistant to multiple items of washing, and is non-toxic and harmless to the human body.

With the enhancement of people's requirements for product individualization and high grade, the anti-mosquito finishing fabrics with high added value have attracted much attention in recent years. At present, the anti-mosquito finishings on the market are mostly concentrated on textiles with low requirements on washability, such as mosquito nets, etc., and the anti-mosquito clothing fabrics have not been popularized yet, and have quite good development prospects.

SUZHOU KRS is an industrial and trade-integrated printed fabric manufacturer, which started in 2012. SUZHOU KRS has accumulated rich production experience and technology in this field. Widely used in shoe material, high-end luxury car interiors, fashion fabrics, and so on. Scuba knitting fabric 40E is one of our products, you can click to view more details.

Brand

KRS

Model

DA-JQ-A007

Minimum

120

Standard

55/50

Unit

YARDS

Pack

ROLLS

If you are interested in our products, please contact us as soon as possible.

Related news of Warp knitted fabric

Performance Advantages Of Spandex Warp Knitted Fabrics

Features and purchasing skills of warp knitted polyester fabrics

Advantages and applications of warp knitted mesh fabrics

[suzhoukrs]

What are the main waterproof technologies of textile fabrics

The waterproof coated fabric is a new type of textile fabric, which is composed of high molecular waterproof and breathable material plus fabric composite fabric. It mainly has the functions of moisture permeability, breathability, and insulation. The textiles of waterproof fabrics have the properties of oil repellency, water repellency, and water pressure resistance. Waterproof coated fabrics are commonly used in outdoor clothing such as jackets.

With the improvement of consumption level and the popularity of outdoor activities such as snowboarding, surfing, cycling, and outdoor camping in China, the application of waterproof finishing has become more and more extensive, and the requirements have become higher and higher, especially in terms of outdoor activity equipment.

In mountaineering, a complete set of equipment includes at least: jackets, outdoor tents, thermal clothing, waterproof shoes, waterproof raincoats, etc. These types of equipment all have one thing in common, and that is waterproofing. Stretchable waterproof material for outdoor covers is widely used in outdoor clothing, and it is often seen in luggage, shoe materials, outdoor tents, etc.

So what are the methods of fabric waterproof production and processing?

Tight weave

The first waterproof finishing is to use the high-density fiber textile method, which is often referred to as compact fabric. This type of finishing method is currently mostly used for polyester or fiber textiles. The yarns are closely arranged, and the water pressure resistance can reach 104-105Pa. This type of fabric has high density, and poor tear performance in the textile and the spinning fabric must be specially treated, the production cost is high, and the processing is difficult, so it is rarely used.

Coating finishing method

The coating method is mainly to coat a layer of film on the surface of the fabric through lamination or coating process, so that the pores on the surface of the fabric are closed, so as to obtain waterproof performance. Although the products obtained by this method are impermeable to water, they are also not breathable. They are mostly used in the production of rain-proof tarpaulins, umbrellas, and other open-use products that are not suitable for wearing. With the extension of late technology, waterproof and moisture-permeable coatings have also appeared, and the application in clothing is mainly sun protection.

Hydrophobizing agent finishing method

This method is to form a hydrophobic gene on the surface of the fabric to prevent water molecules from passing through the material, thereby achieving the purpose of waterproofing. This is the so-called lotus leaf effect.

The dip rolling of this method is usually carried out under normal temperature conditions, that is, the so-called lotus effect. This kind of process is simple and easy to implement, and the cost is low.

There are many types of hydrophobic agents suitable for this type of process, such as the early aluminum soap water repellent, paraffin emulsion, etc., and the recent silicone, organic fluorine, etc. At present, fluoride water repellent is the most cost-effective and most widely used among these water repellent finishing agents, namely C8 water repellent, and C6 water repellent.

SUZHOU KRS is an industrial and trade-integrated printed fabric manufacturer, which started in 2012. SUZHOU KRS has accumulated rich production experience and technology in this field. Widely used in shoe material, high-end luxury car interiors, fashion fabrics, and so on. Plain weave Elastic spandex fabric for sportswear is one of our products, you can click to view more details.

NO

DA-JQ-A005

Ingredients and content

89% Polyester 11% elastic

GSM/WIDTH

250g/m2*150cm

Weaving process

Warp knitting

USE

Swimwear/underwear/sportswear/yogawear/bodyfitting wear/sports equipment/home textitle ect.,

If you are interested in our products, please contact us as soon as possible.

Related news of Warp knitted fabric

What are the benefits of wearing tights when exercising

Types Of Warp Knitted High-Density Suede Fabrics

[suzhoukrs]

Applicable styles and maintenance of fleece and cashmere fabrics

Fleece is a common autumn and winter fabric, and fleece must be used in autumn and winter clothing.

The characteristics of fleece are comfortable hand feel, good elasticity, strong moisture absorption, and good warmth retention. Fine fleece fabric is mainly used for suit fabrics, and some high-end autumn and winter tops are used. Cashmere, but cashmere is not recommended for trousers, because it is not wear-resistant or tear-resistant. If the pants are worn for a long time, the knees are prone to bulge, and the crotch is easy to tear.

If you want to choose a coated fabric, stretch fleece fabrics are generally suitable for more rigid coat styles, such as polo coats, navy coats, etc., while cashmere fabrics are more suitable for soft and elegant coats, such as bathrobe coats or Raglan coat.

Maintenance of fleece and cashmere

Cashmere in the maintenance and collection should pay attention to the following points:

1 Keep it clean and wash it frequently to prevent the breeding of moths.

2 When storing in different seasons, it must be washed, ironed, dried, sealed in a plastic bag, and placed flat in the wardrobe. Pay attention to shading to prevent fading. It should be often ventilated, dusted, dehumidified, and not exposed to the sun. Anti-mildew and moth-proof tablets should be placed in the wardrobe to prevent cashmere products from being damp and moldy.

3 The lining of the matching coat should be smooth when worn inside, and hard objects such as pens, key cases, mobile phones, etc. should not be placed in the pockets to avoid local friction and pilling. Minimize friction with hard objects (such as sofa backs, armrests, table tops) and hooks when wearing them. It is not easy to wear for too long, and it must be stopped or changed for about 5 days to restore the elasticity of the clothes to avoid fiber fatigue damage.

4 If there is pilling, do not pull it forcefully. Use scissors to cut off the pom-pom, so as not to be repaired due to off-line.

Fleece maintenance and collection should pay attention to the following points:

1 When hanging hangers in the wardrobe, use thicker and thicker coat hangers for hanging and storage.

2 The frequency of frequent replacement and use is too high, which will easily cause the coat to be deformed and worn. It is recommended to wear it in turn with other coats to reduce the frequency of use and to maintain the perfect texture for a long time.

3 Be careful ironing and wearing for a long time, the joints are prone to wear wrinkles, which will affect the appearance. You can set the steam iron to a low temperature and iron it at a distance of 1~2cm from the fleece coat; you can also put a towel over the fleece sweater and iron it so that it will neither hurt the fleece fibers nor leave behind Iron marks.

SUZHOU KRS is an industrial and trade integrated printed fabric manufacturer, which started in 2012. SUZHOU KRS has accumulated rich production experience and technology in this field, widely used in shoe material, high-end luxury car interiors, fashion fabrics, and so on. Warp knitted high-density suede 50D island fiber is one of our products, you can click to view more details.

NO

DT-SK-R007

INGREDIENTS AND CONTENT

100% Poly

GSM/WIDTH

115GSM/60" inch

WEAVING PROCESS

Warp knitting

USE

Swimwear/underwear/sportswear/yoga wear/body fitting wear/sports equipment/home textile etc.,

If you are interested in our products, please contact us as soon as possible.

Related news of Warp knitted fabric

What kind of fabric is suede? What are the advantages?

Evolution and Differences in Tights and Compression Garments

Are the so-called 30D, 40D, 50D fabrics nylon or polyester?

[suzhoukrs]

The basic concept and operation method of fabric printing

Fabric printing is the process of making dyes or paints create patterns on fabrics.

China used letterpress printing to print pottery patterns as early as the Neolithic Age. It was used for seals and clay seals in the Zhou Dynasty, and even in the Spring and Autumn Period and the Warring States Period, letterpress printing has been used for fabrics, and it reached a high level in the Western Han Dynasty. Mawangdui, Hunan The unearthed printed colored yarn is the product of the combination of three letterpress overprinting and color painting.

1. Basic concept of fabric printing

Printing: The process of printing flower patterns with certain color fastness on textiles with dyes or pigments.

2. Classification of printed materials

The objects of printing are mainly fabrics and yarns. The former attaches the pattern directly to the fabric, so the pattern is clearer. The latter is to print the pattern on the yarn aggregates arranged in parallel, and after weaving, the fabric has a hazy style pattern effect.

3. The difference between printing and dyeing

1） Dyeing is to dye the dye evenly on the textile to obtain a single color. Printing is a pattern of one or more colors printed on the same textile, which is partial dyeing.

2） Dyeing is to make dyes into dye liquor and dye them on fabrics through the water as a medium. Printing uses paste as a dyeing medium, and dyes or pigments are mixed into printing paste and printed on the fabric. After drying, steaming and color development are carried out according to the nature of the dye or color so that it can be dyed or fixed. On the fiber, it is finally washed with soap and water to remove the paint and chemicals in the floating color and color paste.

4. Pre-printing treatment

Similar to the dyeing process, the fabric must be pretreated before printing to obtain good wettability so that the colorant can enter the fiber evenly. Plastic materials such as polyester sometimes need to be heat-set to reduce shrinkage deformation during printing.

5. Characteristics and methods of fabric printing

Fabric printing can be divided into screen printing, roller printing, thermal transfer printing, wood template printing, hollow-out printing, tie-dye, batik, splash-dye printing, hand-painted printing, etc.

Among them, there are two printing methods of commercial importance: screen printing and drum printing. Thermal transfer printing is relatively less important. Other printing methods that are rarely used in textile products such as traditional wood stencil printing, wax vale (ie wax proof) printing, yarn tie-dye printing, and resist printing.

Many textile factories mostly use screen printing and roller printing to print fabrics. Most thermal transfer printing done by printers is also printed in this way.

SUZHOU KRS is an industrial and trade integrated printed fabric manufacturer, which started in 2012. SUZHOU KRS has accumulated rich production experience and technology in this field, widely used in shoe material, high-end luxury car interiors, fashion fabrics, and so on. PRINTED FABRIC 08 is one of our products, you can click to view more details.

If you are interested in our products, please contact us as soon as possible.

Related news of printed fabrics

Several operating methods of fabric printing that you don't know 1

What is digital printing? What are the characteristics?

[suzhoukrs]

The characteristics of fleece and the difference from cashmere

In the impression of many people, fleece and cashmere are the same things. In fact, there are still differences between the two, which are explained below for you.

1. Different sources

Cashmere and fleece are grown on different kinds of sheep, fleece comes from sheep, cashmere comes from goats, and the best fleece in the world comes from Australia, where the price of superfine merino fleece is second only to cashmere. The best cashmere comes from Inner Mongolia, and 70% of the world's cashmere is produced in Inner Mongolia, and its quality is also superior to other countries.

Fleece

It is from sheep. Even though sheep fleece is very fine, it is called fleece in the industry and profession. fleece products have the characteristics of plump hand feeling, good warmth retention, and comfortable wearing.

Cashmere

It is a thin layer of fine fleece that grows on the outer epidermis of the goat and covers the root of the goat's coarse hair. When it is cold in winter, it grows to resist the wind and cold, and it falls off after the spring turns warm. It is a rare special animal fiber that naturally adapts to the climate.

2. Different collection and output

Fleece is easy to comb, cashmere is difficult to comb.

The diameter of cashmere is only 14-16 microns, which is much thinner than fleece, so when collecting cashmere, it is particularly meticulous. It is impossible to use scissors or razors directly like fleece. You can only use a special iron comb for baby goats to do "physiotherapy". ”, combing the hair, generally combing down the fine fleece that grows at the root of the goat’s coarse hair little by little.

Due to the scarcity of cashmere production, goats can only comb 50-80 grams of cashmere a year, and an average of five cashmere can make a cashmere sweater, which only accounts for 0.2% of the world's total animal fiber production. It is recognized as "soft gold".

The thickness of fleece spans a wide range, and its smallest diameter is 10 microns to 40 microns of coarse hair, so it is a bit "violent" when collecting fleece. There is manual or electric shearing, and the sheared fleece is like a bed of cotton fleece. It's like taking off a big leather jacket.

A sheep can shave several kilograms of fleece every year, and the fleece sheared by a sheep can weave several sweaters a year.

3. Fleece fabric features:

1） Hand feel

Pure fleece fabrics usually feel smooth to the touch, while long-haired fabrics are smooth to the touch along the fur, and tingling against the fur.

2） Color

The color of pure fleece fabrics is naturally soft, bright, and not out of date.

3） Elasticity

Tighten the thing with your hand, and then release it immediately to see the elasticity of the fabric. The pure fleece fabric has a high rebound rate and can quickly return to its original state.

4） Burning smell

Take a bunch of yarn and burn it with fire, the pure fleece fiber smells like burning hair.

5） Mobility

The hair of all animals is scaly under the microscope. If it is a long-haired fabric, just take a fleece and rub it a few times and it will move up or down as shown in the picture above.

SUZHOU KRS is an industrial and trade integrated warp knitted suede fabric manufacturer, which started in 2012. SUZHOU KRS has accumulated rich production experience and technology in this field. Widely used in shoe material, high-end luxury car interiors, fashion fabrics, and so on. Warp knitted suede 50D island fiber for sofa/shoes is one of our products, you can click to view more details.

NO

DT-SK-R002

INGREDIENTS AND CONTENT

100% Poly

GSM/WIDTH

95GSM/63" inch

WEAVING PROCESS

Warp knitting

USE

Swimwear/underwear/sportswear/yoga wear/body fitting wear/sports equipment/home textile etc.,

If you are interested in our products, please contact us as soon as possible.

Related news of warp knitted fabrics

Are the so-called 30D, 40D, 50D fabrics nylon or polyester?

Physical Properties Of Warp Knitted Spandex Fabrics

Difference between warp knitted plain and khaki fabric

[suzhoukrs]

Several operating methods of fabric printing that you don't know 2

Printing fabrics are directly printed on white or light-colored fabrics with dyes prepared into the color paste to form patterns. The process is simple, the cost is low, and the application is the most. The usual printing methods include flat screen printing, rotary screen printing, transfer printing, etc.

1. Rotary screen printing

The printing die is a cylindrical nickel-skin screen with a hollow pattern, which is installed above the circulating rubber guide belt in a certain order and can rotate synchronously with the guide belt. During printing, the color paste is input into the net and stored at the bottom of the screen. When the rotary screen rotates with the guide belt, the scraper pressed on the bottom of the screen is relatively scraped with the flower net, and the color paste reaches the surface of the fabric through the pattern on the net.

Rotary screen printing is a continuous process, with high production efficiency, and has the advantages of roller and flat screen printing, but there are certain limitations in pattern fineness and printing color intensity. Remember: rotary screen printing has certain limitations in color selection.

2. Pigment printing

Also known as paint printing, because the pigment is a non-water-soluble coloring substance and has no affinity for fibers, its coloring must be achieved by the coating of polymer compounds (adhesives) that can form films and the adhesion to fibers. Pigment printing can be used for the processing of any fiber textiles, and it is more advantageous in the printing of blended and interwoven fabrics.

3. Zinc printing

The printing method of carving out the pattern of leakage on the zinc plate, covering it on the fabric, and scraping the color paste to obtain the pattern. This method is suitable for printing large flower-shaped or thick fabrics, such as headscarves, towels, etc. Chemical etching processes are now sometimes used instead of hand-engraved designs.

4. Roller printing

The process of printing on the fabric with a copper roller engraved with a concave pattern is also known as copper roller printing. The engraved drum is referred to as the flowerpot. When printing, first stain the surface of the flower tube with color paste, and then use a sharp and flat scraper to scrape off the surface color paste of the unengraved part of the flower tube, so that the color paste remains in the concave pattern. When the fountain is imprinted on the fabric, the color paste is transferred to the fabric to print the pattern. Each flower tube is printed with a color paste. If multiple flower tubes are installed on the printing equipment at the same time, the color pattern can be printed continuously.

5. Digital Printing

Digital printing is printing using digital technology. Digital printing technology is a high-tech product that has gradually formed with the continuous development of computer technology. It integrates machinery, computer, and electronic information technology. It first appeared in the mid-1990s. The emergence and continuous improvement of this technology, has brought a new concept to the textile printing and dyeing industry, and its advanced production principles and methods have brought an unprecedented development opportunity to the textile printing and dyeing industry.

6. Spray printing

A printing method in which the dye liquor is sprayed onto the fabric with a liquid-containing sprayer through a patterned screen mesh or a patterned paper carving. Also known as liquid jet printing. In the 1970s, a spray printing method controlled by an electronic computer program was developed, and various color dyeing liquids were intermittently sprayed from many combined jet ports to form patterns of various colors, which were mainly used for carpet printing.

SUZHOU KRS is an industrial and trade integrated printed fabric manufacturer, which started in 2012. SUZHOU KRS has accumulated rich production experience and technology in this field. Widely used in shoe material, high-end luxury car interiors, fashion fabrics, and so on. PRINTED FABRIC 08 is one of our products, you can click to view more details.

If you are interested in our products, please contact us as soon as possible.

Related news of fabrics

Are the so-called 30D, 40D, 50D fabrics nylon or polyester?

What are the benefits of wearing tights when exercising

Types Of Warp Knitted High-Density Suede Fabrics

[suzhoukrs]

Several operating methods of fabric printing that you don't know 1

Blue printed cloth is a typical printed fabric, a kind of handicraft in China, also known as indigo cloth, commonly known as medicine spot cloth, watering cloth, and so on. It is a traditional Chinese craft printing and dyeing product. Her simple and elegant cultural charm is unique in traditional Chinese folk art, and it exudes the charming fragrance of oriental culture for thousands of years.

Blue calico was originally printed and dyed with bluegrass as a dye. The blue printed cloth is baked blue with lime and soybean powder synthetic mortar and is made of cotton, hand-woven, engraving, scraping, and other printing and dyeing processes.

Printing method

1. Transfer printing

First, the pigment is printed on the paper by the printing method to make transfer printing paper, and then the color is transferred to the fabric through high temperature (heating and pressure on the back of the paper), which is generally used for chemical fiber fabrics, which are characterized by bright colors and fine layers. The pattern is realistic and artistic, but the process is currently only suitable for a few synthetic fibers such as polyester. The transfer printing process is simple, the investment is small, and the production is flexible. It is currently more popular in the market... But to be honest, the price of this transfer printing is a little higher than other printing types, but it has a certain grade~~

2. Discharge printing

(Discharge) Discharge print (discharge printing) uses dyes that are not resistant to discharge agents to dye the ground color. After drying, use a dye printing paste containing a discharge agent or a dye-resistant dye at the same time to print. The ground-color dyes are destroyed and decolorized, forming white patterns on the ground or colored patterns formed by dyeing with flower-color dyes. Also known as pull white or color pull.

3. Reduced printing

The process utilizes the difference in chemical resistance of different fibers in interwoven or blended fabrics and applies a burning-pulling agent to partially remove one of the fibers in the fabric through a printing method, leaving other fibers to form a translucent pattern. Also known as burn-out printing or burnt-out printing.

4. Shrink Print

The printing method is used to locally apply chemicals that can expand or shrink the fibers on the fabric, and through appropriate treatment, the fibers in the printed part and the fibers in the non-printed part will have different expansion or shrinkage, so as to obtain products with regular concave-convex patterns on the surface. Such as pure cotton printed seersucker with caustic soda as a bulking agent. Also called bump printing.

5. Flat screen printing

The printing die is a polyester or nylon screen (pattern) fixed on a square frame with a hollow pattern. The color paste can be penetrated at the patterned part of the flower plate, and the mesh is closed with a polymer film layer at the non-patterned part. When printing, the pattern plate is pressed against the fabric, the color paste is placed on the pattern plate, and the scraper is used to scrape and press back and forth so that the color paste penetrates the pattern and reaches the surface of the fabric. Flat screen printing has low production efficiency, but has wide adaptability and flexible application, and is suitable for the production of small batches and multiple varieties.

SUZHOU KRS is an industrial and trade integrated printed fabric manufacturer, which started in 2012. SUZHOU KRS has accumulated rich production experience and technology in this field. Widely used in shoe material, high-end luxury car interiors, fashion fabrics, and so on. PRINTED FABRIC 08 is one of our products, you can click to view more details.

If you are interested in our products, please contact us as soon as possible.

Related news of fabrics

Types Of Warp Knitted High-Density Suede Fabrics

Improving the fullness of black suede by adjusting the retanning method

Physical Properties Of Warp Knitted Spandex Fabrics

[suzhoukrs]

What is digital printing? What are the characteristics?

Printed fabric is a kind of textile with printed patterns, including cotton, polyester, and other materials. The following will give you a brief introduction to what is printed fabric. What are the characteristics?

What is printed fabric?

The printed fabric is to print the printing pattern on the woven fabric. According to the different printing materials and different printing processes, printing fabrics are also classified accordingly.

How is the printed fabric processed?

Generally, the fabric must be shrunk first, then printed for printing. Otherwise, printing first and then shrinking will cause color damage to the printed color, as well as uneven shrinkage and deformation of the pattern. Then print, so that the fabric will achieve the effect we want.

Features of printed fabrics

1. The patterns of printed cloth are various, which solves the problem of only solid color cloth without printing in the past.

2. It greatly enriches people's material life enjoyment, and printed cloth is widely used, not only can be worn as clothing but also can be mass-produced.

3. High quality and low price, the people can afford it, and it is prevalent.

Digital printing

Digital printing is through various digital means such as scanning, digital photos, images, or various digital patterns processed by computer input into the computer, and then processed by the computer color separation printing system, the special RIP software will pass the printing system to it. Various special dyes (active, disperse, acid main coatings) are directly spray-printed on various fabrics or other media and then processed to obtain various high-precision printing products required on various textile fabrics.

Compared with the traditional printing and dyeing process, it has the following advantages:

1. The production process of digital printing significantly shortens the original process route, the speed of receiving orders is fast, and the cost of proofing is significantly reduced.

2. The principle of digital printing technology makes its products break through the limitations of traditional production of color registration and flower length, and can make textile fabrics achieve a high-grade printing effect.

3. The digital printing production truly realizes the production process of small batches and quick response, and the production batch is not subject to any restrictions.

4. The high-precision printing process makes it unnecessary to use water and color paste during the printing process.

SUZHOU KRS is an industrial and trade integrated printed fabric manufacturer, which started in 2012. SUZHOU KRS has accumulated rich production experience and technology in this field. The suede knitted fabric uses imported tercio high-speed warp knitting machine weaving, a mature product production system, the most competitive product quality, and low price. Widely used in shoe material, high-end luxury car interiors, fashion fabrics, and so on.

If you are interested in our products, please contact us as soon as possible.

[suzhoukrs]

What kind of fabric is suede? What are the advantages?

Suede is a velvet fabric, and its surface is covered with a layer of fluff. Because of its good touch, it is widely used in the clothing industry, automobile industry, luggage industry, etc. It can be divided into natural suede and imitation suede.

What is the difference between natural suede and faux suede?

Natural suede is a fur-processed product of animal chamois. There are few sources, so the price is not cheap. It belongs to fur fabric.

The imitation suede is a chemical fiber fabric, and its fabric components are warp-knitted island silk and weft-knitted polyester yarn.

Sea island silk is a kind of microfiber, its processing technology is relatively complicated, and there are not many domestic manufacturers that can produce it.

What are the advantages of suede fabric?

1. The suede fabric has a sanding process in the weaving process so that the finished fabric has very fine fluff and a good feel!

2. Imitation suede is a kind of artificial fur in the nobility. Compared with natural suede, it is not inferior at all. The overall feel of the fabric is soft and the fabric is light as a whole. Compared with the bulky feeling of traditional fur, it is really advantageous.

3. Suede has a strict bronzing printing process in the textile process, the fabric style is relatively unique, and the designed garments have a very good retro style.

4. The suede fabric is waterproof, breathable, and comfortable to wear. This is mainly due to the fact that the sea-island silk textile process can effectively control the overall shrinkage rate of the fabric so that the fiber gap of the fabric is controlled between 0.2-10um, which is larger than the sweat vapor of the human body. (0.1um), much smaller than the diameter of the water drop (100um-200um), so it can achieve the effect of being waterproof and breathable!

Woven suede products are mainly divided into warp and weft suede.

Weft Suede

The width of the blank is 160cm, and the width of the finished product is 145cm. The gram weight of futures fabrics is around 160 grams per square meter. The velvet is an ideal fabric for making all kinds of home textiles and shoe materials. Product sales are on the rise in the market. The product specification of the warp suede is 11.5*5+28, and the raw material specification is 105Dx150D. It can also be produced on water jet looms or air jet looms. The texture is better than that of the weft suede. Thickness and strong velvet feeling are its main characteristics. The finishing can be bronzing, embossing, punching, printing, etc. The width of the product is 160cm, the width of the finished product is 152cm, and the weight of its finished fabric is about 170 grams per square meter. Warp velvet not only makes sofa covers, decorative cloth, baby spring, and autumn clothes but also makes curtains after printing.

Tricot Suede

The island silk FDY75D/36F*37 is used as the raw material, and the warp knitting high-speed textile technology is applied, so that the product has the advantages that its camel hair cannot match. The fabric produced in this way has the advantages of soft and waxy hand, good drapability, good wearability, and easy care. The latter process is the embossing finishing process, which is embossed into a variety of popular patterns, including more than 20 kinds of irregular square dot leaves, daffodils, ripples, roses, and blooming flowers. The base colors used are also colorful, adding a more captivating style to the fabric. The width of the finished product is 150cm, and the rice cloth weighs about 140 grams. This fabric is suitable for making casual clothes and skirts for beautiful women. It is fashionable and elegant and adds attractive charm.

SUZHOU KRS is an industrial and trade integrated printed fabric manufacturer, which started in 2012. SUZHOU KRS has accumulated rich production experience and technology in this field. The suede knitted fabric uses imported tercio high-speed warp knitting machine weaving, a mature product production system, the most competitive product quality, and low price. Widely used in shoe material, high-end luxury car interiors, fashion fabrics, and so on. Warp knitted suede spot in goods is one of our products, more details are as follow:

Brand

KRS

Model

SUEDE SPOT

Minimum

1

Standard

55D

Unit

YARDS

Pack

ROLLS

If you are interested in our products, please contact us as soon as possible.

Related news of suede fabric

Improving the fullness of black suede by adjusting the retanning method

Adjusting the Black Suede Textile Dyeing Addition Method

[suzhoukrs]

Adjusting the Black Suede Textile Dyeing Addition Method

With the liberation of productivity, the demand for suede leather fabric such as suede cloth fabric has grown substantially. Black suede textile accounts for a large proportion of our country's tanning enterprises. But at present, there are few kinds of dyes for black dyeing, the purity is not high, and the secondary color is heavier. The black dyeing of suede fabrics has always been a headache. Either it cannot be dyed black, and the amount of dyes increases; To dye black leather, especially black suede leather fabrics, the following key steps must be followed.

(1) Pre-staining

Before chrome retanning, add a little black dye for pre-dyeing. The dosage is generally 0.5% of the weight of the leather. At this time, the wet blue leather has a strong positive charge, and the anionic dye is quickly combined on the surface of the leather. less, it will not have a great impact on the leather surface. Then, chrome tanning (or multi-metal tanning agent retaining) is carried out, and the positive electricity is strengthened again so that the dyes are further fixed. At this time, the fixed dyes are very strong and difficult to be washed in the subsequent neutralization and retaining. Detach, and lay the foundation for the final increase in the concentration of color on the surface of the suede fabric.

(2) First through dyeing and then surface dyeing

This method is often used when both dye penetration and black purity and fullness are required. The dye was added in two portions. The main purpose of the first dyeing is to dye through, so acid dyes with small molecules and strong permeability should be used. Before adding dyes, 0.5% to 1.0% ammonia water can be added to increase the pH value to promote dye penetration. After dyeing, acid was added to fix the color, and the liquid was changed for the second dyeing. The main purpose of the second dyeing is to make the surface color thick and the blackness pure. It should be mainly direct dyes with strong surface coloring ability. At the end of dyeing, add acid to fix the color and adjust the pH value to 3.5 ~ 3.8.

(3) "sandwich" staining method

That is, a cationic material (such as chromium powder, cationic resin tanning agent, etc.) is added in the middle of the two anionic dyestuffs. Such as dyeing - oiling - chrome tanning - dyeing. Compared with chrome tanning-dyeing-refueling, its advantages are: first, there is no chrome retanning before the first dyeing, the positivity of the leather is low, and the dyes are easy to penetrate; which increases the positivity of the leather, which does not only fix the dyes and oils added first but also facilitates the dyeing of the dyes added later; third, because the cationic auxiliaries are added in the middle of two dyeings, and added after the dyeing is completed In comparison, it is less likely to cause the problem of uneven coloring.

(4) Top dyeing

The principle of the top dyeing method is the same as that of the "sandwich" dyeing method, which is to increase the positivity of the leather before the final dyeing. The basic method of top dyeing is, dyeing oil - fixing color-changing water and adding dye top dyeing - formic acid fixing. After changing the water, add a small amount of formic acid or fixing agent for 10 minutes, and then add dye top dyeing. The difference between the top dyeing method and the dye addition method is that the second dyeing of the former is supplementary dyeing, while the second dyeing of the latter is a step of the main dyeing.

(5) Overdyeing

That is to say, the wet leather dyed with anionic dyes is then color-coded with basic dyes (cationic dyes). The chrome-tanned leather is neutralized, retanned with anionic tanning agents (tannin extract, synthetic tanning agent, polymer tanning agent, etc.), and dyed with anionic dyes and oil so that the surface anion is significantly enhanced. The leather fiber and the dye can show a strong affinity, which is not only conducive to the dyeing of cationic dyes, but also to the fixation of the anionic dyes and oils added first, and the thick tones are thick. However, due to the poor fastness of basic dyes, it is generally only used for over-dyeing of black suede, and the dosage should not be too large, and the general dosage is about 0.5%.

SUZHOU KRS is an industrial and trade integrated printed fabric manufacturer, which started in 2012. SUZHOU KRS has accumulated rich production experience and technology in this field. The suede knitted fabric uses imported tercio high-speed warp knitting machine weaving, a mature product production system, the most competitive product quality, and low price. Widely used in shoe material, high-end luxury car interiors, fashion fabrics, and so on. The suede knitted fabric is one of our products, more details are as follow:

Brand

KRS

Model

DT-SK-R005

Minimum

120

Standard

105/75/70

Unit

YARDS

Pack

ROLLS

If you are interested in our products, please contact us as soon as possible.

[suzhoukrs]

Improving the fullness of black suede by adjusting the retaining method

Suede knitted fabric is very popular in the current market, and the competition is fierce, requiring light or no finishing in terms of finishing. This type of product requires that the color dyed in the water field is basically the same as the color of the sample, which puts forward high requirements for dyeing technology and technology. In the face of new demands, the dyeing of black fabric, which was considered the easiest in the past, turned out to be a difficult and complicated dyeing technical problem. Among them, the more prominent problem that troubles many technicians is that the color of black fabric is not full and cannot reach the required blackness.

Adjust the retaining method

(1) To avoid the "discoloration" effect of anionic retaining agents, retaining with more anionic retaining agents before dyeing, especially polymer tanning agents, will cause discoloration of dyeing, which is a process for processing dark colors. fabric and black fabric presented no small difficulties. In order to better solve this difficulty, the order of retaining and dyeing can be reversed, that is, dyeing first and then retaining. Retaining and dyeing can also be adjusted as follows: first, a small amount of polymer retaining agent is used before chrome retaining, then chrome remaining, neutralization, and then a method of dyeing and then anionic material retaining. This has little effect on dyeing, because the amount of polymer retaining agent used before chrome retaining is small, which has little effect on the positivity of the fabric. Then, after neutralization, the dyeing is placed before the retaining process of a large number of anionic materials, so that the dyes first seize the active points on the fabric surface, which can basically avoid the discoloration effect of anionic retaining agents. In addition to the above methods, the fabric blanks retained with anionic retaining agents such as tannin extract can also be pretreated with cationic auxiliaries and chrome tanning agents to increase the positive surface charge of the fabric, and then carry out the dyeing operation, which is beneficial to Binding of dyes.

(2) Glutaraldehyde combined with chrome tanning In the chrome tanning stage, the use of glutaraldehyde in combination with glutaraldehyde can greatly improve the looseness of fabric fibers.

And improve the penetration ability and dyeing uniformity of dyes. Because the improvement of the dye penetration ability mainly comes from the change of the fabric fiber structure rather than the reduction of the surface positive charge, it has little effect on the affinity of the dye and the fabric fiber and basically does not reduce the color depth of the fabric. Retaining with aluminum salts also helps to achieve a fuller shade.

SUZHOU KRS is an industrial and trade-integrated printed fabric manufacturer that started in 2012. SUZHOU KRS has accumulated rich production experience and technology in this field. The suede knitted fabric uses imported tercio high-speed warp knitting machine weaving, a mature product production system, the most competitive product quality, and low price. Widely used in shoe material, high-end luxury car interiors, fashion fabrics, and so on. The suede knitted fabric is one of our products, more details are as follow:

Brand

KRS

Model

DT-SK-R005

Minimum

120

Standard

105/75/70

Unit

YARDS

Pack

ROLLS

If you are interested in our products, please contact us as soon as possible.

[suzhoukrs]

What is polyamide fiber fabric? What are the characteristics?

Polyamide fiber is the world's first synthetic fiber developed by foreign scientists, and the well-known nylon is another title of it, which is widely used in clothing fabrics.

There are many varieties of polyamide fabric, including polyamide fabric 6, polyamide fabric 66, polyamide fabric 11, and polyamide fabric 610. The most important ones are polyamide fabric 66 and polyamide fabric 6. It has high strength, high wear resistance, and good resilience, and can be used for various clothing materials and knitwear through pure spinning and blending.

Advantage:

1. The abrasion resistance of polyamide fabric is many times higher than other fiber fabrics of similar products, and the durability is very good.

2. polyamide fabric has better hygroscopicity, so the clothes made of polyamide fabric are more comfortable to wear than polyester clothes.

3. polyamide fabric is a light fabric, suitable for making mountaineering clothes, winter clothes, etc.

4. The elasticity and elastic recovery of polyamide fabric are excellent.

Classification of polyamide fabric

1. Pure polyamide fabric

Pure polyamide fabric fabrics are all kinds of fabrics woven from polyamide fabric filament or polyamide fabric staple yarn. polyamide fabric filament fabrics, such as polyamide fabric taffeta, polyamide fabric crepe, etc. It has the characteristics of smooth hand, firm and durable, and moderate price. polyamide fabric taffeta is mostly used for light clothing, down jackets, or raincoats, while polyamide fabric crepe is suitable for summer dresses, spring,  and autumn dual-use shirts, etc.

2. polyamide fabric staple fiber blended fabric

polyamide fabric blended fabrics are fabrics that are blended with polyamide fabric staple fibers and other fibers. polyamide fabric spun yarn fabric is favored by many casual clothes because of its good hygroscopicity, excellent wear resistance, and high wearing comfort, and can be used as casual pants, shirts, etc. The fabrics formed by these various fibers have the characteristics of each fiber and learn from each other to make the fabric more practical. Such as viscose/polyamide fabric gabardine, a fabric formed by blending 15% polyamide fabric and 85% viscose into yarn, has the characteristics of thick fabric and toughness and durability.

3. polyamide fabric filament and interwoven fabric

Core-spun fabrics and interwoven fabrics with polyamide fabric filaments are fabrics made of spun yarns and filaments. polyamide fabric core-spun and interwoven fabrics are new types of fabrics developed in the past two years. These fabrics are interwoven with a variety of differentiated yarns or filaments by using polyamide fabric filament single and double core-spun technologies. The fabric is soft and elastic. It is smooth and plump and has a certain 3D three-dimensional and segment dyeing effect. At the same time, it also has the characteristics of waterproof and moisture permeability, anti-wrinkle and warmth retention, no ironing, moisture absorption, quick drying, and not easy to deform. And high-end clothing fabrics with a unique style and strong fashion.

Because of its unique characteristics, polyamide fabrics meet people's requirements for comfort and high wear resistance of clothing, and become the best choice for sportswear, swimming suits, fitness suits, down jackets, mountaineering clothe,s and accessories.

KRS is an industrial and trade integrated printed fabric manufacturer, which started in 2012.  KRS has accumulated rich production experience and technology in this field. Polyamide with elastic spandex warp knitting fabric is one of our products, more details are as follow.

Brand

KRS

Model

JA-JQ-B005

Standard

40/40

Unit

YARDS

Pack

ROLLS

If you are interested in our products, please contact us as soon as possible.

[suzhoukrs]

The impact of digital printing technology on the textile industry

Digital printing technology originated in inkjet printers and works on the same principle. Due to the poor effect of inkjet printing technology and the improvement of digital printing technology, digital printing has gradually replaced inkjet printing as the mainstream.

Digital printing is printing using digital technology. Digital printing technology is a high-tech product that integrates machinery, computer, and electronic information technology and is gradually formed with the continuous development of computer technology.

The emergence and continuous improvement of this technology have brought a new concept to the textile printing and dyeing industry, and its advanced production principles and methods have brought an unprecedented development opportunity to the textile printing and dyeing industry.

Digital jet printing is a systematic project involving cutting-edge technologies such as CAD technology, network communication technology, precision machining technology, and fine chemical technology.

Since digital jet printing technology involves a lot of calculations and controls, it can be said that digital jet printing technology would not be possible without today's high-speed computers. For now, the development of digital jet printing technology is basically synchronized with the working ability of computers, and the development of computer technology has not shown any signs of weakening. With the development of computer technology, it can be expected that the future digital jet printing technology will also have high development.

There is no doubt that the emergence and successful application of digital printing technology is undoubtedly a major technological revolution in the textile industry. It has a milestone significance. The economic and social benefits brought by digital printing will have a profound impact on the world, especially in textile printing and dyeing countries. influences. Like previous industrial upgrades and changes, the emergence of new digital jet printing technology is both a challenge and an opportunity, and textile enterprises must seize the opportunity in the upcoming changes.

The impact of digital printing

(1) Promote the production mode and business model of the enterprise

(2) It will meet people's individual needs to the greatest extent and improve people's quality of life.

(3) Digital printing will directly promote the development of "green textiles" and "green manufacturing".

Technical characteristics of digital printing

Simply put, the production process of digital printing is input into the computer through various digital means such as scanning, digital photos, images, or various digital patterns processed by the computer, and then processed by the computer color separation printing system, and then processed by the special RIP software. Its spray printing system directly sprays various special dyes (active, dispersed, and acidic main coatings) onto various fabrics or other media, and then after processing, it can obtain the required various high-quality dyes on various textile fabrics. Compared with traditional printing and dyeing processes, high-precision printing products have the following advantages:

1. The production process of digital printing greatly shortens the original process route, the speed of receiving orders is fast, and the cost of proofing is greatly reduced.

2. The principle of digital printing technology makes its products break through the limitations of traditional production of color registration and flower length, and can make textile fabrics achieve high-grade printing effects.

3. Digital printing production truly realizes the production process of small batches and quick response, and the production batch is not limited.

4. The high-precision printing process makes it unnecessary to use water and color paste during the printing process.

KRS is an industrial and trade integrated printed fabric manufacturer, which started in 2012.  KRS has accumulated rich production experience and technology in this field. PRINTED FABRIC 01 is one of our products, you can click to view the details.

If you are interested in our products, please get in touch with us as soon as possible.

[suzhoukrs]

What are the benefits of wearing tights when exercising

Due to the rapid development of the economy, the pace of life is getting faster and faster, and people's pressure has also increased sharply. More and more people keep healthy through running, fitness, and other sports, and the sales of sports-related fabrics have also increased. Today, I'm going to explain to you why you should wear sports tights when working out.

The primary function of tights is to wick away moisture. When sweating during exercise, the functional fabric can adjust the humidity and temperature of the human body, discharge the sweat in time, and keep the body dry at the same time, to exert the best state of exercise as much as possible.

Features of sports tights

1. Moisture wicking

Due to the special-shaped structure of clothing fibers, its moisture conduction speed can reach five times that of ordinary cotton fabrics, so it can quickly transfer sweat from the human body.

2. Quick dry

Sweat evaporation is mainly completed by the body's radiant heat and air convection, but because the surface area of the fiber fabric is much larger than that of ordinary fabrics, it evaporates faster.

3. Lightweight and breathable

The fabric shape of the special fiber determines that the clothes will be much lighter than ordinary clothes under the same area, the air permeability is also superior, and the wearing is comfortable.

4. Reduce fatigue

Because tightness can reduce muscle shaking, it can reduce energy consumption. Due to the existence of pressure, the blood of the lower limbs can return to the heart faster, thereby improving the energy supply of the human body, prolonging the exercise time, and reducing fatigue.

As a "second skin" during exercise, tights help you stay flexible and free in fitness through their unique elastic fabric. Only when the muscles are stretched freely during the contraction process and will not be restricted or restrained by any clothes, can a better fitness effect be achieved.

After special treatment, the tights will give the most comprehensive protection to the muscles of the key parts of the body for different types of sports. In addition, tights also need to take into account the comfort of wearing. Its unique functional fabric can speed up the evaporation of sweat and the export of heat during your fitness process. The flat sewing process is also designed to minimize seams and skin from repeated friction. A good bodysuit will match all your fitness needs.

The benefits of wearing tights

1. Sports tights can make people excited

Sports tights will have a sense of pressure on the surface of the human skin and increase blood circulation on the surface of the skin. At the same time, the wrapping of the muscles can make people feel excited so that the whole body is full of strength, and there is a feeling of eagerness to try.

2. Sports tights can effectively prevent the accumulation of lactic acid

Sports tights will effectively promote the decomposition of lactic acid, prevent the accumulation of lactic acid, and make the human body more comfortable so that the body will not feel sore after exercise. The body's soreness is caused by the accumulation of lactic acid produced by the friction of the muscles during exercise.

3. Sports tights are breathable and quick-drying

Sports tights are made of unique high-stretch fabrics, which can quickly absorb sweat, allowing you to keep your body dry at all times, making sports more comfortable and healthy.

KRS is an industrial and trade integrated warp knitting fabric manufacturer, which started in 2012.  KRS has accumulated rich production experience and technology in this field. Warp knitted Nylon lycra 70D full dull is one of our products, more details are as follow:

NAME

Nylon and spandex FULL-DULL

NO

JA-JQ-B002

INGREDIENTS AND CONTENT

76% NYLON 24%POLY

GSM/WIDTH

230GSM/60" inch

WEAVING PROCESS

Warp knitting

If you are interested in our products, please get in touch with us as soon as possible.

Related news of spandex fabrics

Test Method And Application Of Warp Knitted Spandex Fabric

Physical Properties Of Warp Knitted Spandex Fabrics

Difference Between Tricot Stretch Spandex and Lycra Fabrics