#24bh

[johndball]

Replacing the Jayco Jay Feather 24BH bunk bed USB outlets

Replacing the Jayco Jay Feather 24BH bunk bed USB outlets

Recently, some friends of ours invited us to Virginia Tech to stay the weekend and watch VT baseball. Our friends stayed in our travel travel and we asked them for improvement ideas. One of their suggestions was to cover up the green LEDs in the bunk bed USB outlets because it was too bright at night. Well, I went on the hunt and found the American Technology Components “AV1-5-UNLP” USB power…

View On WordPress

[johndball]

Quick tip - bug screens for the 2021 Jayco Jay Feather 24BH

Wasps. Yellow Jackets. Spiders. Just a few things that I do not want to see when I open the utility doors for regular maintenance. If you have a 2021 Jayco Jay Feather 24BH, I found these screens to be a tremendous help in keeping out unwanted pests. Keeping the heater vents covered 1x Camco RV Insect Screens for DuoTherm and Suburban Furnace Vents – Qty 2 I didn’t use the factory retaining…

View On WordPress

[johndball]

Running an RV air conditioner on a 15 amp circuit!?

Running an RV air conditioner on a 15 amp circuit!?

As we prepared our travel trailer for multiple summer trips, one of the topics that came up was “moochdocking” with family and friends. While we have two 50 drops at our house for the travel trailer, chances are we will be staying with family and friends that only have 15 amp circuits. I did a good bit of research and came across the Micro Air Easy Start, model number ASY-364-X20-IP for our…

View On WordPress

[johndball]

Swapping the Jay Feather 24BH blue front cap LEDs with Amber - Part 2

In Part 1, I explained how to replace the two forward facing blue button LEDs with amber LEDs. In this post, I’ll explain how to replace the LED strips. Let’s get started! Equipment used in this post: BoogeyLights End Cap LED Strips for RVs I pulled the LED strips out of my Jay Feather to get an idea on how complex the re-install would be. What I discovered was promising. The LED strips on the…

View On WordPress

[johndball]

Swapping the Jay Feather 24BH blue front cap LEDs with amber - Part 1

Swapping the Jay Feather 24BH blue front cap LEDs with amber – Part 1

This is a two-part post. In Part 1, I’ll explain how to replace the two forward facing blue button LEDs. In Part 2, I’ll explain how to replace the LED strips for amber. Equipment used in this post: PilotLights “Tiny LED accent or Courtesy Lamp 3/4″ diameter”. We love our 2021 Jayco Jay Feather 24BH, but those blue front cap LEDs… wow! If you read my opening comments on the interior blue LED…

View On WordPress

[johndball]

Changing our Jayco Jay Feather interior blue LEDs to white

Changing our Jayco Jay Feather interior blue LEDs to white

Over the next few weeks, I will be sharing some modifications that we’ve made to the factory-default installation of various Jayco components. I recently wrote about adding an on/off switch to our IRV 36 entertainment system. After that was completed, we decided to rid ourselves of the blue LEDs that came pre-installed from the factory. For us, the blue LEDs look bad and for somebody who has…

View On WordPress