Shuttering Magnets with Adaptor Accessories for Supporting Plywood, Wooden Formwork Side Rails
Shuttering Magnets with Adapting accessories are supportive to connect the magnetic system and formwork side mould tightly. The above adapter is designed for fixing precast plywood or wooden material form rails in the thick precast solid walls production. Generally the magnets used to stand up to the side of wooden forms directly to support. But when producing thick solid walls or sandwich slabs, it requires extra supports on the top to fix the side mold. The normal single standard box magnet is hardly to work ideally. Under the circumstance, the adaptor accessory is necessary to use for the top supports. The machined thread at the buttom of rod could be easily threaded into the welded nuts of the box magnet housing. And locate the standard 2100KG switchable push/pull button magnets with adaptor to the right position, push the button of magnet to active the magnetic force. Subsequently adjust the above bar to the required height against the tope of wooden side forms. Each step of installation could be easily operated by manual. As as a leading China-based magnetic solutions factory for precast modular construction, Meiko Magnetics not only provide OEM shuttering magnets production for precasters and precast mould equipment factory, but also offer full magnetic side forming systems designs and production, with benifits of our 10 years precast project's participation.
Read the full article