#cementmix

[jetomes1-blog]

JETaFLOW™ Mortar Mix

Self-leveling mortar for applications up to 1" thick

                                                        Repair Thickness

Featheredge to 1"

                                                        Set Time

1 Hour

                                                        Application Technique

Pour, Pump

                                                                                                                                                                                                                                                    Description

JETaFLOW is a heavy duty 1 component polymer modified self-leveling underlayment, concrete repair, and resurfacing mortar. JETaFLOW is simply mixed with water and applied from featheredge to 1″ thick in one application. Product is ready for light traffic in 4-5 hours at 70 degrees Fahrenheit.

Dependable and Durable

• Heavy duty – Over 6000 psi

• One component – Just add water

• No troweling – Self leveling

• Portland Cement based

• Polymer modified

• Pumpable

• Custom colors available

• Short wait for foot traffic

Where to Use

• Unleveled concrete

• As an underlayment

• As a wear surface

• Interior or exterior surfaces

• Warehouse floors

• With radiant heat flooring

• Decorative flooring

Components

JETaFLOW is a special blend of cements, aggregates and exclusive modifiers. Designed for general purpose and high performance underlayment, concrete repair or resurfacing applications.

Application

Pour JETaFLOW onto the primed surface. To break surface tension a porcupine roller is recommended. For large area applications it is recommended to start near the perimeter in a continuous operation using a long handle spreader to distribute the product where needed. For patching application, pour material into primed area to level. For applications over 1″ use JETaFLOW High Build. Apply to primed, clean sound substrates only. Contact JE Tomes for any questions.

[jetomes1-blog]

Super HydroPlug™

Patch and repair active leaks in 1-2 minutes

                                                        Repair Thickness

3/4" - 3"

                                                        Set Time

1 Minute

                                                        Application Technique

Trowel, Gloved Hand

Super HydroPlug is a special blend of cement, aggregates, and modifiers. Super HydroPlug offers the ultimate in workability. Used to quickly patch and repair active leaks and hole or anchor equipment.

Description

Super HydroPlug is a special blend of cement, aggregates, and modifiers. Super HydroPlug offers the ultimate in workability. Used to quickly patch and repair active leaks and hole or anchor equipment.

Dependable and Durable

• Easy to mix and finish

• Extremely short setting time

• Long lasting formula

• Highly versatile

• Excellent compressive strengths

• Extra rich for smooth troweling

• Mix with water or Tome polymer liquid

Where to Use

• Stops active leaks

• Filling holes

• Anchoring equipment and machinery

• Concrete patching

• Sealing cracks

• Elevator pits, wells

Components

Super HydroPlug is a special blend of cement, aggregates, accelerating additives and other modifiers. Used to quickly patch holes, repair active leaks, and anchor equipment.

Application

Apply with gloved hand or trowel to clean, sound and stable substrates only. Cracks or holes must be opened a minimum of ¾” wide. Wait for leaking water to stop or reach its lowest ebb, then place mixed material with trowel edge onto surface and hold in place until firmly set.

[jetomes1-blog]

HydroPlug™ Cement Mix

Patch and repair active leaks in 3-5 minutes

                                                        Repair Thickness

3/4" - 3"

                                                        Set Time

3 Minutes

                                                        Application Technique

Trowel, Gloved Hand

                                                                                                                                                                                                                                                    Description

HydroPlug is a special blend of cement, aggregates, accelerating additives and other modifiers. HydroPlug offers the ultimate in workability. Designed to be applied with a gloved hand or trowel in one or more applications. Used to quickly patch holes, repair active leaks, and to anchor machinery and equipment.

Dependable and Durable

• Easy to mix and use

• Long lasting formula

• Highly versatile

• Excellent compressive strengths

• Extra rich for smooth troweling

• Very short setting time

• Mix with water or latex liquid

Where to Use

• Stops active leaks

• Filling holes

• Anchoring equipment and machinery

• Concrete patching

• Sealing cracks

• Elevator pits, wells

Components

HydroPlug is a special blend of cement, aggregates, accelerating additives and other modifiers. Use to quickly patch & repair active leaks, holes or anchoring equipment and machinery.

Application

Apply with gloved hand or trowel to clean, sound and stable substrates only. Cracks or holes must be opened a minimum of 3/4″ wide. Wait for leaking water to stop or reach its lowest ebb, then place mixed material with trowel edge onto surface and hold in place until firmly set.

[jetomes1-blog]

TintCrete™ Concrete Mix

Color tinted polymer modified high flow concrete mix with corrosion inhibitor

                                                        Repair Thickness

3/4" to 24"

                                                        Set Time

45 Minutes

                                                        Application Technique

Pour, Pump

                                                                                                                                                                                                                                                    Description

TintCrete™ Concrete is a 1 component, polymer modified, high performance concrete mix. TintCrete™ Concrete is mixed with water and applied from 3/4″ thick to 24″. Product includes 3/8″ aggregate, corrosion inhibitor, air entrainment, and flow agents. Available in 12 standard colors. Custom Matching also available.

Dependable and Durable

• High flow – Long pouring time

• Polymer modified

• Corrosion inhibitor included

• Shrinkage-compensated

• Air entrained

• Portland Cement based

• Includes 3/8″ rock repairs

• One component – Just add water

• 12 Standard colors

• Custom matching available

Where to Use

• Form and pour applications

• Concrete patching minimum 3/4″ thick

• Partial or full repairs

• Interior or exterior

• Horizontal, vertical, overhead

• High rise buildings

• Balconies, parking garages

• Bridges, tunnels, marine structures

Components

TintCrete™ Concrete is a special blend of cements, aggregates and exclusive modifiers. Designed for general purpose and high performance concrete repair and restoration applications.

Application

Pour into form or apply horizontally at a minimum thickness of 3/4″ within 30 minutes.

[jetomes1-blog]

Form Flo P-51™ Cement Mix

High flow concrete mix with corrosion inhibitor – DOT approved

                                                        Repair Thickness

1" to 24"

                                                        Set Time

30 Minutes

                                                        Application Technique

Pour, Pump

                                                                                                                                                                                                                                                    Description

Form Flo P-51 is a 1 component, high flow concrete mix. Form Flo P-51 is mixed with water and applied from 1″ thick to 24″. Product includes 3/8″ aggregate, flow agents, air entrainment, and corrosion inhibitor.

Dependable and Durable

• High performance – Technical grade

• High flow – Long pouring time

• One component – Just add water

• Portland Cement based

• Includes 3/8″ rock

• Shrinkage-compensated

• DOT Approved

• Air entrained – Freeze/thaw durable

• Corrosion inhibitor included

Where to Use

• Form and pour applications

• Concrete repairs minimum 1″ thick

• High rise buildings

• Balconies, parking garages

• Partial or full repairs

• Bridges, tunnels, marine structures

• Interior or exterior

• Horizontal, vertical, overhead

Components

Form Flo P-51 is a special blend of cement, aggregate and exclusive modifiers. Designed for general purpose and high performance concrete repair and restoration applications.

Application

Pour into form or apply horizontally at a minimum thickness of 1″ within 30 minutes.