#jetaflow

[jetomes1-blog]

JETaFLOW™ High Build Mortar Mix

Self-leveling mortar for applications 1/8" - 2 1/2" thick

                                                        Repair Thickness

1/8" - 2 1/2"

                                                        Set Time

1 Hour

                                                        Application Technique

Pour, Pump

JETaFLOW High Build is a heavy-duty 1 component polymer modified, self-leveling underlayment, concrete repair, and resurfacing mortar. JETaFLOW High Build is simply mixed with water and applied from 1/4″ to 2 1/2″ thick in one application. Product is ready for light traffic in 4-6 hours at 70 degrees Fahrenheit.

Dependable and Durable

• Heavy duty – Over 4500 psi

• One component – Just add water

• No troweling – Self-leveling

• Portland Cement based

• Polymer modified

• Pumpable

• Short wait for foot traffic

Where to Use

• Unleveled concrete

• As an underlayment

• As a wear surface

• Interior or exterior surfaces

• Warehouse floors

• With radiant heat flooring

• Decorative flooring

Components

JETaFLOW High Build is a special blend of cements, aggregates and exclusive modifiers. Designed for general purpose and high performance underlayment, concrete repair or resurfacing applications.

Application

Pour JETaFLOW onto the primed surface. To break surface tension a porcupine roller is recommended. For large area applications it is recommended to start near the perimeter in a continuous operation using a long handle spreader to distribute the product where needed. For patching application, pour material into primed area to level. For applications over 1″ use JETaFLOW High Build. Apply to primed, clean sound substrates only. Contact JE Tomes for any questions.

[jetomes1-blog]

JETaFLOW™ Mortar Mix

Self-leveling mortar for applications up to 1" thick

                                                        Repair Thickness

Featheredge to 1"

                                                        Set Time

1 Hour

                                                        Application Technique

Pour, Pump

                                                                                                                                                                                                                                                    Description

JETaFLOW is a heavy duty 1 component polymer modified self-leveling underlayment, concrete repair, and resurfacing mortar. JETaFLOW is simply mixed with water and applied from featheredge to 1″ thick in one application. Product is ready for light traffic in 4-5 hours at 70 degrees Fahrenheit.

Dependable and Durable

• Heavy duty – Over 6000 psi

• One component – Just add water

• No troweling – Self leveling

• Portland Cement based

• Polymer modified

• Pumpable

• Custom colors available

• Short wait for foot traffic

Where to Use

• Unleveled concrete

• As an underlayment

• As a wear surface

• Interior or exterior surfaces

• Warehouse floors

• With radiant heat flooring

• Decorative flooring

Components

JETaFLOW is a special blend of cements, aggregates and exclusive modifiers. Designed for general purpose and high performance underlayment, concrete repair or resurfacing applications.

Application

Pour JETaFLOW onto the primed surface. To break surface tension a porcupine roller is recommended. For large area applications it is recommended to start near the perimeter in a continuous operation using a long handle spreader to distribute the product where needed. For patching application, pour material into primed area to level. For applications over 1″ use JETaFLOW High Build. Apply to primed, clean sound substrates only. Contact JE Tomes for any questions.