#copolyester

[search4reseach]

Search4Research - Global Copolyester Ether Elastomer Market 2019 Size, Share, Price, Trend, 2019 Analysis and 2024 Forecasts By Application, Technology, Players and Regions

[juniperpublishersajop]

Hydrolytic Degradation of Thermoplastic Copolyester Nanocomposites-Juniper Publishers

JUNIPER PUBLISHERS- ACADEMIC JOURNAL OF POLYMER SCIENCE

Abstract

Thermoplastic copolyesters (TPE-Es) are multi-block copolymers commonly incorporating hard (polyester) and soft (polyether) blocks. Multifunctional epoxy-based chain extenders (TGDDM) are one of the additives that serve to reverse molecular weight (MW) damage caused by the process of hydrolysis of TPE-E. There are two functional groups that are capable of additional reactions on the terminal hydroxyl and carboxyl groups of TPE-E. Considering the hydrogen bonded hard segments in hard domains are less susceptible to hydrolysis compared to the non-hydrogen bonded equivalents, the phase separated morphology of polyether-polyester copolymers based TGDDM also provides to the long-term stability. The molecular weight of TPE-E was determined by GPC and the thermal and tensile behaviors were investigated.

Keywords:  Thermoplastic copolyester; Crosslinking; Hydrolysis; Mechanical properties

Abbrevations:   TPE-Es: Thermoplastic Copolyesters; MW: Molecular Weight; TGDDM: Tetraglycidyl-4,4-Diamino-Diphenylmethane;

    Introduction

Polyester hydrolysis produces hydrophilic acid (carboxyl) end groups in the polymer, which increase the ability for the polymer to absorb water because of the decrease in its surface resistance and hydrophobicity [1-3].

Chain extenders remain necessary in improving the molecular weight of TPE-E and, consequently, broaden their industrial applications. Chain extenders help in the substitution of polyester hydrolysis-caused molecular weight damage, leading to the production of a polymer with desired melting strength and rheological properties. The chain extenders function effectively, predominantly due to their bi-functional groups that inherently react with polymer terminal groups. Moreover, specific chain extenders, such as tetraglycidyl-4,4-diamino-diphenylmethane (TGDDM), are vital in the enhancement of TPE-E molecular weights. Consequently, TPE-E would have improved rheological, mechanical, and thermal characteristics [4].

Hytrel® 3078 is a brand of TPE-E (copolyesters, COPEs) under the trademark of DuPont. Hytrel 3078 nanocompsite prepared by reactive extrusion-based masterbatch (HC1-C2), dry feed (HC2) of organo-fluoromica combined with TGDDM, the post-addition of TGDDM (HC1-T) and the direct-addition of TGDDM- organo-fluoromica (HT-C1) were compared for their resistance to hydrolysis in aqueous buffer solutions for 140 h solution at 100°C at pH 1 (Figure 1).

The enlargement of the MWD for the nanocomposites can also be indicated by the polydispersity index (PDI= Mw/Mn), besides extremely high molecular weights above 2 × 106g/mol are also obtained. These outcomes show modifier chain extension efficiency which has an effect on the rheological characteristics of the material.  

The PDI of the host polymer before and after reactive modification via different processing routes (blank TPE-E, HT-C1, HC2, HC1-C2 and HC1-T) are also given in Table 1. A significant decrease in Mn of HC1-C2 nanocomposites occurred during a masterbatch of reactive nanofiller in TPE-E. It is still expected that there may be thermal and thermo-oxidative degradation processes associated with reactive processing this TPE-E, which are responsible for the molecular weight decrease in the melt compounded TPE-E. The relatively low Mw, suggesting that HC1-C2 is less crystalline than other modified nanocomposites, and therefore it was not possible to obtain high molecular weight TPE-E. Higher molecular weight may be obtained if the TGDDM is post-added with TPE-E matrix for HC1-T. It was shown that the Mn of the HC1-T was twice that of first adding of TGDDM into TPE-E (HT-C1). This halving of molecular weight resulted in the HT-C1 having a tensile strength of 35MPa, which was 4.9MPa lower than that of the HC1-T (39.9MPa) (Figure 2). The postaddition of TGDDM decreased the PDI of TPE-E nanocomposite. This contrasts with the significant improvement in Mw of HC1-C2. The high PDI value can also be attributed to higher branching formation of TPE-E. Twin screw extrusion, which compounds thermally-sensitive materials, yields a far greater shear energy than single screw extrusion, which results in a loss of molecular weight and a decrease in properties and performance [5].

The thermal and mechanical properties of polymers are influenced by polydispersity of the hard segments. The presence of many epoxy groups gives rise to a highly crosslinked network within the nanocomposite. As seen in Figure 3, the addition of TGDDM in HT-C1, HC1-C2 and HC1-T clearly shifted the exothermic heat of crystallisation peaks of the hard segment to higher temperatures. The result of these studies indicates that hard segments of uniform length crystalise faster and better than hard segments of non-uniform length. However, the hard segments represent a physical cross-link which report elastomeric properties to the soft phase. The hard-soft segmental solubility parameters and aligned hard and soft segments, polydispersity and molecular weight, as well as the processing and thermal history of the TPE-E host matrix are essential factor to be considered to the tensile properties demonstrated by the nanocomposites [6].

For more Open Access Journals in Juniper Publishers please click on: https://juniperpublishers.com

For more articles in  Academic Journal of Polymer Science please click on: https://juniperpublishers.com/ajop/index.php

For more Open Access Journals please click on: https://juniperpublishers.com

[chemicalworldnews]

Eastman to expand copolyester capacity in Malaysia

Eastman Chemical Company announced a planned expansion of its copolyester site in Kuantan, Malaysia. The expansion is expected to be completed in the first quarter of 2018 and will increase polyethylene terephthalate glycol (PETG) capacity by approximately 20 percent.

This investment supports the continued growth of copolyester products globally and provides flexibility across the company’s polymer asset base.

Speciality plastics is a part of Eastman’s Advanced Materials business segment. Eastman’s Kuantan, Malaysia site produces several copolyesters, including Eastman Spectar and Eastman Eastar copolyesters.

[reportsandmarkets]

Capacity and Commercial Production Date of Global Copolyester Ether Elastomer Major Manufacturers in 2016-2022

Capacity and Commercial Production Date of Global Copolyester Ether Elastomer Major Manufacturers in 2016-2022

This report studies Copolyester Ether Elastomer in Global market, especially in North America, China, Europe, Southeast Asia, Japan, and India, with production, revenue, consumption, import and export in these regions, from 2012 to 2016, and forecast to 2022. This report focuses on top manufacturers in global market, with production, price, revenue, and market share for each manufacturer,…

View On WordPress

[proto-pasta]

View this post on Instagram

Full speed ahead with Proto-pasta #PETG #copolyester - been a while since #3dprinting with our @ultimaker #3dprinter - forgot how fast & smooth this motion system is! #3dprint #reprap #opensource #ultimaker2 (at Portland, Oregon)

[michaelteeuw]

One of the many many parts of an upcoming project. Not telling what it is yet. I leave that to your imagination.

[michaelteeuw]

View this post on Instagram

Just because I wanted to try a print with 100% perimeters (no infill, just fully solid using the perimeters), I printed this lid that snaps onto a bolt hole. A perfect snap like this is so satisfying! :) I love the transparency of the ColorFabb XT. #3dprinting #3ddesign #fusion360 #cura #colorfabb #xt #copolyester #lulzbot #mini @colorfabb @colorfabb_official @adskfusion360

[michaelteeuw]

Doing in house repairs is one of the most satisfying things of 3D Printing. This is a self designed shower head holder replacement for Grohe (and maybe others). Printed using ColorFabb's XT CoPolyester on the Lulzbot Mini. If you could use it as well, you can download it from Thingiverse: 1736721. #3dprinting #3ddesign #grohe #lulzbot #colorfabb #diy #maker #shower #xt #copolyester