XCF air inflation floatation cell
XCF air inflation floatation cell
When flotation cell is at work, the rotation of impeller makes the slurry all around via tank bottom absorbed from downside of impeller into in-ner-vanes of impeller, where low pressure air produced by the blower goes into via hollow shaft and the air distributor of impeller chamber at the same time. After fully mixture of the slurry and air among vanes, they are pushed out in inclined upward direction from upper half of the impeller around, and go into the tank via steady flow and orienta-tion by the stator. Air bubbles rise to the foam stability area, and after concentration process, the foams overflow from the overflow weir into the foam tank. Another part of the slurry flows toward the lower part of impeller, then through the impeller agitation, they are mixed to-gether to form mineral laden bubbles again, and the rest of the slurry will flow to the next tank to become tailings eventually.
The structure and property are similar to that of KYF flotation cell. The difference is that a stator is specially set above the impeller to form a special negative pressure area. It has the function of automatic slurry suction with a little higher power consumption.
For more information about the mineral processing equipment, please visit our website message:
mine dewatering:http://www.dewateringmachines.com
Flotation cell:http://www.miningfloation.com
Linear vibrating screen:http://www.minescreening.com
gold cyanide:http://www.goldcyanide.com
spiral classifier:http://www.mineralclassifying.com
Vibrating Screen:http://www.mineralscreen.com
mineral processing equipment:http://www.mineralequipments.com/
dewatering equipment:http://www.dewateringmachines.com/product.html
Beneficiation equipment:http://www.miningfloation.com/product.html
spiral classifier:http://www.minescreening.com/product.html
