#im608

[auto-tools]

Troubleshooting Guide: BMW Software Disappeared in Autel IM608

An Autel IM608 customer encountered an issue where the BMW diagnostic software disappeared after purchasing a new authorization. This guide provides a step-by-step solution to resolve the problem.

Problem Description: This customer reported that after acquiring a new authorization, the BMW diagnostic software vanished. Attempts to uninstall the software and restore factory settings did not rectify the issue.

Solution: Follow these steps to resolve the problem:

1. Select the icon at the bottom of the screen as the picture shows, and then choose "ES File Explorer."

2. Navigate to the path /scan/Vehicle/Europe/BMW.

3. Long-press the "BMW" folder to delete it, then click "OK" to confirm.

4. After successful deletion, close the background processes by swiping up, similar to operating on a mobile phone. Next, access "Update" to update the BMW software.

This troubleshooting guide aims to assist Autel IM608 users in resolving the specific issue of missing BMW diagnostic software after a new authorization purchase.

For more technical support please visit http://blog.obd2shop.co.uk/

[auto-tools]

Autel IM608 II Program 2015 Iveco Daily All Keys Lost on Bench

Today I'm gonna program 2015 Iveco Daily all keys lost with Autel MaxiIM IM608 II Key Programmer. I couldn't connect the BCM via OBD even though I've found its security card. So I should remove BCM to read EEPROM.

Tools Required LISHI SIP22 2-in-1 Auto Pick Xhorse Dolphin XP005 Autel IM608 II + XP400 Pro APB129 EEPROM Adapter Iveco BCM

Step1. Cut Key Use LISH Auto Pick to decode the door lock, then cut the key with Dolphin XP005 key cutting machine. All key lost >> Iveco >> Enter key code: DE08545 >> OK >> Cut key

Step2. Program Key Remove BCM from the vehicle. The EEPROM SSOP is 95640. Install the APB129 adapter onto XP400Pro, and place a new key. Programmer >> Accept >> Write key via dump >> OK >> Europe >> Iveco >> Daily >> 2012- (95640) >> One-touch processing

Check: 1. If the programmer is connected correctly. 2. If the chip is connected correctly. 3. If the key is placed correctly. 4. If the selected menu corresponds to the chip and key. Press "OK". Save data file success.

Select a key: Key3 >> Make key Save the newly generated file. The operation is completed and the key is ready for use.

Reinstall the BCM back to the vehicle to have a try. The key can start the engine and the remote work. Done.

www.obd2shop.co.uk

[obdiishop]

How to repair BMWMini electric windows by Autel IM608

My BMW/MiniFRM module is not responding and now the power windows are not working. It’s not like earlier cars could use hand-operated switches. So I decided to read the EEPROM and rewrite the corrupted data. This article will show you How to repair BMWMini electric windows by Autel IM608.

Tools used: Autel MaxiIM IM608 FRM Info Chip: MC9S12XEQ384 Mask: 3M25J

Path On Autel IM608, go to Programmer>>Chip (EEPROM,MCU,ECU)>>Chip read & write>>Other>>BMW>>E – SERIES>FRM>XEQ384>RW

Step 1. Read D-FLASH, EEPROM, P-FLASH Check “Schematic diagram”.

Connect APA109, IM608, XP400Pro and FRM circuit board by diagrams.

Go to “Set” to check if we’ve got 5 voltage, and turn on read/write/earse validation.

Then try to “Read” D-FLASH.

Empty, that’s why it is done.

Read Partition. Also empty.

EEPROM is also empty.

So we just read and save P-FLASH as a backup.

Usually this part is intact.

Step 2. Write partition

Go to D-FLASH and select “Write partition”. (So we can get a new EEPROM to write data in.)

Set EEPROM as 16, which will give you four kilobytes of memory on EEPROM.

Set D-FLASH as 0.

Step 3. Write EEPROM back

Then I find an EEPROM file with the same part number (3456395) on Google.

Of course this EEPROM belongs to a a different car, VIN…but it allows FRM to boot.

Transfer the data file to IM608 Key Programmer.

Go to “EEE” (EEPROM), and select “Write”.

Load the EEPROM file we just found.

Write successfully.

Go back to read D-FLASH and EEPROM.

FLASH is also empty, but we have the data in EEPROM.

Step 4 . Check FRM on car

Restore FRM back, and see if it boots well.

Use an Autel Diagnostic Tool to check windows quickly.

The wrong chassis means our FRM has communications.

Before we have a DTC about FRM error.

Diagnosis>>Control unit>>Body>>FRM2 (Footwell Module 2)>>Read codes

Now our FRM comes back.

And then the rest work is to program the module the car because it comes from a different car.

Notice: IM608 doesn’t support BMW X1 FRM program.

Credits to LM Auto Repairs.

Hope this could help.

https://blog.obdii.shop/how-to-repair-bmwmini-electric-windows-by-autel-im608/

[myemilyzhang]

How to Program BMW CAS4 CAS4+ Key via XTOOL X100 PAD3 or VVDI2 or Autel IM508 IM608

What you need: Car: 2014 BMW CAS4 Keys: one (original) working key+ one new (blank) key

Tool: Xtool X100 Pad3 VVDI2 Autel IM508/IM608

Part 1: XTOOL X100 PAD3 Program 2014 BMW CAS4 Key via OBD

Device: XTOOL X100 PAD Elite auto key programmer

Test two car keys: The BMW original key works normally, and the new key doesn’t work before programming.

Step-by-step guide to match the key via OBD: Connect X100 PAD3 with the vehicle via main cable and OBDII-16 adapter Open X100 PAD Elite tablet to operate Click on [Diagnosis]

Select [BMW], agree with the disclaimer

Select [Match Key]

Then it will prompt that “Need to connect the network to complete this function, please confirm that the network connection is normal.” Just press “YES” Then turn on the ignition switch and hazard warning lights Connect to the Internet Open Wifi setting option to select the corresponding wifi to match Enter WiFi password, then press “Connect”

Press Back icon

Then click “OK”, you will see vehicle info displayed on the screen

Click “OK” to continue You will see keys info 1-10 displayed here The key pos 1-2 are used, and the key pos 3-10 are unused Choose one unused key pos and press [Keys matching]

Confirm the key pos selected, click “YES” Select [Requires original car key to operate]

Follow the instructions on the screen to operate Keep the original car key close to the sensing area

Put the new key at the car induction coil

Checking the new key… Reading key data… X100 PAD3 tablet program new key successfully

In the key info you can see the key pos is used now

Check back icon The screen shows key programming finished

Finally, test the keys to see if they work normally

Fyi…

New XTOOL KC501 car key programmer works with X100 PAD Elite can support the same function as Xhorse VVDI2, such as read and write keys, MCU/EEPROM chips, generate key, etc.

Part 2: How to use VVDI2 Program BMW CAS4 Via OBD?

VVDI2 support BMW CAS4/CAS4+(XEP100 series, 5M48H/1N35H) type with OBDII. Here is the detailed guide.

1.Connect VVDI2 with computer and OBD with car model.Choose BMW software in VVDI2.

Choose CAS4/CAS4+ F series.

2.Then select “Get Key Info”.

3.Unlock CAS4/CAS4+.

Warning:

You can perform CAS4/CAS4+ programming function,it need about 10 minutes.

2.You must provide extra power to car before programming.

3.If all key lost,please press brake and open lights to activate communication.

4.Unlcok processing.

CAS4 unlock success! you can make dealer key or reset KM via OBD.

4.Choose key position and press “Prepare dealer key with programmer”.

5.Click next to continue.

6.Insert working key to ignition switch then press OK.

7.Input original key into VVDI2.Then put new key.

8.Key Write successfully.

And we also sale BMW CAS4 key

Part 3 Autel IM508 IM608 adds BMW CAS4 OBD Programming

Autel MaxiIM IM508/IM608 will free update BMW CAS4/CAS4+ all series done by OBD.

CAS4/CAS4+ add key & all keys lost by OBD CAS4/CAS4+ online module programming

Upcoming update: Autel will release APB112 smart key simulator. APB112 smart key simulator is designed to collect the data sent from the ignition coil, aiming to identify the ignition coil troubles and decode the data of the vehicle key chip. It can also simulate the vehicle key chip. Currently, it supports to simulate the 4D type chip and more key chip types will be supported with subsequent upgrades.

The simulator supports following functions: 46/4D support 46,4D data collection Supports 46 smart key password calculation Support 46 chip simulation Support Toyota 4D (94/D4, 98) smart key simulation Support Toyota H (88/8A, A9, 39) smart key simulation

[obdiishop]

Program Dodge RAM 3500 2016 All Keys Lost with Autel IM608

How to use Autel MaxiIM IM608 to program an all keys lost scenario on a 2016 Dodge Ram 3500.

Main steps:

Immo status scan Erase keys and get pin code Key learning

1) Immo Status Scan

Turn the ignition on Read and erase existing fault codes

2)Press Read Pin Code

Turn ignition off and turn on emergency flashers, press OK

Read 4-digit pin code success

3)Select Key Learning-> Erase Key

   6

Press OK to erase all keys

Turn ignition off and turn on emergency flashers, press OK

All keys have been erased. Select System selection->Immobilizer->Immobilizer CAN

Turn the ignition on Choose Key Learning

Make sure all keys have been erased before learning key. Plae an unprogrammed FOBIK key into the ignition. The ignition should be in the LOCK position.

Autel IM608 learning key in process

Key learning success. Done

[myemilyzhang]

AUTEL MAXIIM IM608 J2534 PROGRAMMING FUNCTION LIST

The Autel MaxiIM IM608 is better bang for buck you can do vehicle programming through j2534 anyway. With a MaxiFlash JVCI J2534 ECU programmer, you can do a bit more with the OEM subscription.

Autel MaxiIM IM608 J2534 programming: reprogramming / key programming / multi-line OEM diagnostics

supports over 2,000 vehicle protocolsEthernet & USB programming connectivityWi-fi upgradable thru firmware updatesbuilt-in operating system / internal program

To perform J2534 programming with MaxiIM, you’ll need:Autel MaxiIM IM608 & MaxiFlash JVCI J2534 ECU programmer (IM508 cannot)A PC/laptopNetwork connectionmanufacturer’s online account / OEM subscriptionA vehicle with a battery maintainer connected

Look at Autel MaxiIM J2534 function list:Each OEM has a special site that allows you to gain access to their programming software. All you need is a credit card to purchase a subscription, and knowledge on how to download and install the software ( This is the most difficult part about programming).

MANUFACTURERWEBSITEDIAGNOSTICSKEY PROGRAMMING CAPABLEAcuraServiceExpress.Honda.comYes – Dealer LevelYes★AudiErwin.AudiUSA.comYes – Dealer LevelYes★★BMWBmwtechinfo.comYes – Dealer LevelYes – Key Synchronization (not new leys).ChryslerTechauthority.comYes – Dealer LevelYes-2004+ (CAN vehicles)★◆FordMotorcraftservice.comYes -2018+Yes★General Motors (GM)ACDelcoTDS.comYes – Dealer LevelYes★HondaServiceExpress.Honda.comYes – Dealer LevelYes★HyundaiHyundaitechinfo.comYes-2018+★Infinitilnfimti-techinfo.comYes-2018+Isuzulsuzutechinfo.comYes – Dealer LevelYesJaguarJaguarTechinfo.comYes – Dealer LevelYes-2017> (DOIP Required) ★KiaKiatechinfo.comYes-2018+★LamborghiniYes – Dealer LevelYes★ ◆Land RoverLandRoverTechInfo.comYes – Dealer LevelYes-2017+ (DOIP Required)★LexusTechInfo.Lexus.comYes – Dealer LevelYes★MazdaMazdaTechInfo.comYes-2018+Yes★Mercedes BenzStarTekInfo.comYes-2018+MiniMiniTechInfo.comYes – Dealer LevelYes – Key Synchronization (not new keys)◆MitsubishiMitsubishiTechInfo.comYes – CAN VehiclesYes ? CAN Vehicles ★NissanNissan-TechInfo.comYes – 2018+PorscheTechinfo.Porsche.comYes – Dealer LevelYesSubaruTechinfo.Subaru.comYes – Dealer LevelYes – 2015+ most models)SuzukiSuzukipitstopplus.comToyotaTechinfo.Toyota.comYes – Dealer LevelYes★VolkswagenErwin.VW.comYes – Dealer LevelYes★◆VolvoVolvoTechinfo.comYes – Dealer LevelYes – 2017+ DOIP (Nol all) ★

★ Required NASTE for keys◆ To use J2534 Needs precoded dealer key

Autel IM608 J2534 Programming FAQs:

Q: Does the IM608 do any pcm programming through the j2534 or does it just use the j2534 for key and immobilizer programing?A: Yes you can use the j2534 to program PCM ( you need an OEM subscription and a laptop to do this). You can do key coding directly from the scanner. You don’t need an OEM subscription.Q: Will the im608 retain all of its key programming abilities if I don’t continue the subscription to Autel??

A: Generally speaking you can use the im608 doesn’t need a subscription in order to work. But there are some manufacturers that require a valid subscription in order to connect to the internet to do the key learning procedure.

Q: Will the Im608 reprogram/program a 2008 Chevrolet suburban Transmission control module?

A: The J2534 and and OEM subscription will allow you to do that . It comes with the IM608.

Q: Will IM608 do Mercedes and BMW online programming like MaxiSys Elite?

A: It can read and write EEPROM data from the old ecu to new ecu for both Mercedes and BMW.But can’t do online calibration for both cars.You can do BMW and Mercedes programming if you have old ECUs. Thats where G-BOX 2 comes in. But do not worry,the IM608 J2534 can do BMW & Mercedes Benz online calibration /Programming at maximum of $60 for daily subscription.

Q: I want to replace and program the PCM for Chrysler Town And Country. Is this possible with the im608? Where do i get the software for the laptop?

A: Yes you can do it with the IM608. You can get the directory of all the OEMS tech info site from Nastf.org. The actual programming files for the new blank ECU came off an online OE program with a purchased subscription from Chrysler using the Maxi J2534 as the Pass through device between the Windows PC and the vehicle .The car needs a battery maintainer connected. The J2534 needs a USB cable attached between it and the laptop, and the laptop needs a good high speed internet connection. Not always easy to pull off when working mobile.

And the right connection among MaxiIM IM608, XP400, J2534 and the vehicle:

How to Program Ford F-250 Used PCM Module with Autel IM608 J2534

[evoautopro]

Mercedes Benz G Series. New training video soon! @auteltools #im508 #im608 #gbox2 #allkeyslost #mercedes #evoautopro @evoautopro https://www.instagram.com/p/CBEd9j5geqO/?igshid=8x1v1ljlgptk

[myemilyzhang]

Mercedes Motorola HC05E6-REMOTE (0F82B) Password Retrieval using AUTEL IM608

Purpose:

Mercedes Motorola Processor Key HC05E6-REMOTE (0F82B) Password Retrieval

You need:

Autel MaxiIM IM608 XP400 programmer Motorola Processor Key

Steps:

Go to Autel Im608 programmer

Accept the agreement

Chip (eeprom, mcu, ecu) – Chip read & write

IMMO – BENZ – HC05E6-REMOTE (0F82B)

Read and save data

Go to EEPROM for Schematic Diagram

Then read HC05E6 remote

Autel IM608 managed to read chip

Save chip data

Exit

Go to EdHex

Select file that saved just now and check password

The security password of the remote key should be: 7c cf 6a ce 9a ab d9 82

Job’s done!