#jumper wire

[allencable007]

Tinned copper wire braided ground wire

Photovoltaic jumper, bridge jumper, bridge ground wire,jumper wire

[quartzcomponents]

Male to Male and Female to Male Jumper Wires Combo (Set of 10+10) 

This combo of breadboard wires is a must have, it has 10 male to male connecting wires and 10 female to male connecting wires that can help you in making all types of breadboard module connections. 

Buy these jumper wires: https://quartzcomponents.com/products/male-to-male-and-female-to-male-combo-wires-set-of-10-10

[vipfixphoneshop-blog]

How to Fix iPhone 6 Plus EEPROM PCB Pins

How to Fix iPhone 6 Plus EEPROM PCB Pins

We received an iPhone 6 plus with some faults on motherboard, which shows that the 3/4 soldered joints on motherboard were fell off. After rooting the phone and connecting jumper wire on PCB, iTune tells error 4005 and there is a white apple logo shows on the screen.

When I receive the motherboard, it has no NAND Flash and many jumping wires on PCB with green oil, as shown in the picture.

After…

View On WordPress

[vipfixphoneshop-blog]

How to Soder jumper Wires on Cell Phone Motherboard

How to Soder jumper Wires on Cell Phone Motherboard

For cell phone maintenance technician, it is an essential operation for soldering and connecting a jumper wire when a track is broken on cell phone motherboard. The function of tracks are offering voltage for the different components. Of course we can’t see the tracks from outside of the cell phone, they are on PCB and we should disassemble phone to check if there is need to solder jumper wires.

View On WordPress

[robbytheautomaton]

Audio Boost Mod -- Regular Show Walkie Talkies

My roommate just got the third most awesome thing I've seen come through our mailbox this year: a pair of Regular Show walkie talkies shaped like Zack Morris cell phones.

The keypads don't do anything, but the form factor and little design details are fun. There's label that reads "Pops suggests making cone-shaped helmets out of tin foil before using" molded into the case. Not stickered. Not decal-ed. But molded. Into the plastic.

Unfortunately, they're not very loud--you can barely hear anything unless you mash the earpiece to your face and your friend shouts into the other one.

I think the designers of these bucked the volume output on purpose--to the point that they are almost useless. Without deliberately pressing the Talk button, holding the two talkies close to each other, thus creating deafening feedback, what's the point of playing with walkie talkies for more than two minutes?

Fortunately, a simple mod is all you need to boost the audio and restore the parent-annoying functionality.

Do this at your own risk.

MOD

Open the Mordecai walkie talkie up with a Phillips-head screwdriver. 

Find the board with the volume knob/power switch on it. Fire up your soldering iron and solder a jumper wire to the points on either side of the surface-mount resistor labeled R2.

That's it. The max volume should be loud enough so when you press the Talk button, the other person can actually hear you.

Alternately, you can probably warm up R2 and pull it off with some pliers, then put a glob of solder across the two points where R2 used to be. This should have the same effect.

Repeat the process on the Rigby walkie talkie. It is important that you do the Mordecai walkie talkie first, because height order.

YIIIIIEEEEEYAAAAAA!!!