#knowyouroil

[pqiamerica]

Heads Up - Labeling Issue

Heads Up – Labeling Issue

Petromerica Semi Synthetic passenger car motor oils display the API Certification mark, but are not API licensed products.

The PQIA reported on a sample of Petomerica 5W-30it tested in January of 2016. Although the tests results showed the product met the SAE J300 specifications for the SAE Viscosity Grade listed on the product label, and was consistent with the API Service Categories shown,…

View On WordPress

[pqiamerica]

PQIA Issues a DON'T BUY on Spirit Oil MD-III

PQIA Issues a DON’T BUY on Spirit Oil MD-III

Buyer Beware! SPIRIT OIL MD-III Are you putting motor oil in your transmission or transmission fluid in your engine? There is a lubricant currently on the shelves in the Midwest that has caught the attention of the Petroleum Quality Institute of America (PQIA), and for good reason. The product is Spirit Oil MD-III from Spirit Oil Company and it is a product PQIA recommends consumers DON’T BUY.…

View On WordPress

[pqiamerica]

Consumer Alert: Petrola Motor Oil and ATF

The Petroleum Quality Institute of America recently shopped a convenience store in Ohio and found a brand on the shelves that consumers are advised not to buy. The product is labeled as “Petrola” and the samples tested include: Petrola “Premium 5-30 Motor Oil” Petrola “Premium ATF” Use of these products in virtually any automobile currently on the road will likely cause harm to the engine or the…

View On WordPress

[pqiamerica]

PQIA Issues Consumer Alert on Cruz-In Motor Oil

      The results of the tests conducted on this sample DO NOT meet the SAE J300 specifications for the SAE Viscosity Grade listed on the product label, and ARE NOT consistent with API SC/CC Service Category claimed on the label. The Kinematic Viscosity @ 100°C is 63% lower than the minimum viscosity specification for this SAE grade. In addition, the organometallic additive levels in this sample…

View On WordPress

[pqiamerica]

Four More 10W-30s

The results of the tests conducted on samples of the brands below meet the SAE J300 specifications for the SAE Viscosity Grade listed on the product label, and are consistent with the listed API Service Categories. It should be noted, however, that the Par Mar API SN product does not display the API certification mark (donut) showing that it is an API licensed product. CLICK BOTTLES BELOW FOR…

View On WordPress

[pqiamerica]

Four More SAE 5W-30s

Four More SAE 5W-30s

The results of the tests conducted on samples of the brands below meet the SAE J300 specifications for the SAE Viscosity Grade listed on the product label, and are consistent with the listed API Service Categories. It should be noted, however, that the API SL Service Category is formulated for use in 2004 and older gasoline-powered automotive engines, and the API SM Service Category is formulated…

View On WordPress

[pqiamerica]

Two More Bad Apples!

Two More Bad Apples!

In the day following the PQIA Lubricant Quality Summit on September 14th, PQIA stopped by several convenience stores located within a few blocks of the hotel where the Summit reception was held. To our disappointment, we found two products on the shelves that immediately raised concern due to labeling issues. And now that the test results are in, it’s clear that in addition to what’s on the…

View On WordPress

[pqiamerica]

More Samples Tested / Steigerwald Joins PQIA Summit Panel

More Samples Tested / Steigerwald Joins PQIA Summit Panel

Three Brands Tested: No Issues The results of the tests conducted on samples of the brands below meet the SAE J300 specifications for the SAE Viscosity Grade listed on the product label, and are consistent with the listed API Service Categories. CLICK BOTTLES BELOW FOR TEST RESULTS Steigerwald to Represent ILMA on the Panel Discussion at the PQIA Lubricant Quality Summit John Steigerwald…

View On WordPress