Accept the default frequency and run the discovery immediately.On the Discovery Settings panel, click Next.When you scale monitoring, you can configure discovery to automatically start monitoring objects it finds. This allows you to review the list of discovered objects and select the ones you want to monitor. On the Monitoring Settings panel, SolarWinds recommends manually setting up monitoring the first time you run discovery.
On the Windows panel, to discover WMI or RPC-enabled Windows devices, click Add New Credential and provide the required information.If any device on your network uses a community string other than public or private, or if you want to use an SNMPv3 credential, click Add Credential and provide the required information.If all devices on your network require only the default SNMPv1 and SNMPv2 public and private community strings, click Next.Select and provide required information.Check Poll for VMware and click Add vCenter or ESX Credential.On the Virtualization panel, to discover VMware vCenter or ESX hosts on your network:.If there are no nodes using agents, you can leave this option unchecked. This setting ensures any agents you deploy, including the one on your Orion server, are up to date. If any nodes are using agents, select the Check all existing nodes check box. The QoE agent monitors packet-level traffic. If the Agents panel appears, you’ve enabled the Quality of Experience (QoE) agent during installation.If this is your first discovery, add a limited number of IP addresses on the Network panel.Click Add New Discovery, and then click Start.If the Discovery Wizard does not start automatically after configuration, click Settings > Network Discovery.After you have configured SolarWinds NPM, log in to NPM and scan the network for devices to monitor.īefore discovering your network, take these steps:
