#remodeling 101

[researching01]

10 Things Nobody Tells You About Replacing Your Kitchen Appliances

New Post has been published on https://headacheshelp.com/awesome/10-things-nobody-tells-you-about-replacing-your-kitchen-appliances/

10 Things Nobody Tells You About Replacing Your Kitchen Appliances

Embarking on a full kitchen remodel, or merely want to swap out your fridge, dishwasher, or range for a newer( better-looking, more eco-friendly, quieter) version? Here are a few things to know about making the switch :P TAGEND Above: Photograph from Kitchen of the Week: At Home with the Ultimate Minimalists, the Creators of Cereal Magazine. 1. Know your appliances’ birthdays.

Appliances , now matter how high-tech, have finite lifespans: Fridges have a life expectancy of about 13 years, and gas scopes about 15 years, according to a study from the National Association of Home Builder via This Old House. Dishwashers? They only last about 9 years, but a dishwasher that’s leaking or not cleaning your dishes means it’s ready to be replaced. Keep track of how old your appliances are; when they get old, it’s time to shop for a new one.

2. Not sure whether to repair or replace? Remember the 50/50 regulation.

Here’s a good rule of thumb to follow when something goes wrong with your appliance: If it’s more than halfway through its lifespan and will cost half as much to repair as to replace, just replace it. You may save headaches( and more mends) in the long run, and upgrading your gadget to a newer model may be greener and save you some money, too.( Simply remember to recycle the old model: insure phase no. 10 ).

Above: Photograph by Haris Kenjar from Before& After: A Modern Makeover for a Circa-1 850 s Row House in Jersey City. 3. You should take a personality test.

Or instead, a kitchen personality test. Especially if you’re doing a full kitchen remodel, you have the chance to consider how you really use your kitchen and choice appliances accordingly. Do you host every holiday for your large extended family and host dinner parties every weekend? You might want to consider get two ovens. Do you cook in large batches every weekend and freeze family meals for the week ahead? You’ll want to be sure you get a fridge with a spacious freezer section. Mostly order takeout? Maybe you can get away with a dishwasher drawer instead of a full-sized dishwasher. Nowadays there are appliance options for every sort of cook; don’t just go with the status quo.

4. Make sure the new model will fit through the door.

The old carpentry adage “Measure twice, cut once” applies here. Measure the area where your new gadget “il be gone” not once , not twice, but three times before you commit. For fridges, you’ll need to leave an inch of space on every side to prevent overheating( read more in Remodeling 101: How to Choose Your Refrigerator ). And don’t forget to account for the swinging of your refrigerator’s door( s) and allow ample space for the oven door to open.( Whoever installed the oven in my tiny apartment kitchen in Manhattan clearly didn’t do this–the door only opens halfway .) And, make sure the new gadget will fit through the door.

Above: Photograph by Heju( @hejustudio) from Kitchen of the Week: Two Young Paris Architects Completely Redo Their Kitchen for Under $4,300. 5. Got a small kitchen? There are appliances for that.

It’s time rethink the 1950 s bigger-is-better attitude towards kitchen appliances. If you have a small space( or don’t want to allot precious kitchen real estate to an SUV-sized fridge ), there are plenty of good-looking, hard-working compact versions on the market. For merely a few, ensure our posts on Skinny Refrigerators, 36-Inch Counter-Depth Refrigerators, Appliances for Small Kitchens, Skinny Kitchen Ranges( Freestanding 24 -Inches ), and even tiny Under-Counter Refrigerator Drawers.

6. Your new gadget( s) could be a focal point.

Nowadays, kitchen appliances are not just workhorse necessities, but can be a design element all on their own. Whether you’re scrapping your kitchen and starting fresh or just swapping out the gadgets, consider investing in a high-style range to be the center of your kitchen( like one of our favorite retro kitchen ranges ), or construct the refrigerator an opportunity for display( might we suggest glass door refrigerators ?).

Above: Photograph by Anna Pirkola from Kitchen of the Week: A Stylist’s $ 3,400 Kitchen Makeover, DIY Scandi Edition. 7. Time your shopping right to get a discount.

NerdWallet indicates buying a previous appliance model after the latest model is released( it’ll likely be discounted ), or shopping around on a few major holidays like Memorial Day, Fourth of July, and Labor Day. Or, buy gently used appliances: insure Remodeling 101: 8 Sources for Used Gadget.

Above: Photograph by Richard Round-Turner from A Star Is Born: A Rehabbed London Maisonette from a Newly Minted Designer, High/ Low Secret Included. 8. It might be a simple swap.

If you’re simply swapping out your fridge, range, or dishwasher for a new model in the same place, you might not need to re-wire or re-plumb. Read up on What to Know When Replacing Your Fridge and What to Know When Replacing Your Dishwasher and consult an electrician or plumber to be sure.

9. You could save money( and energy ).

When shopping for new fridges and dishwashers, look for the Energy Star tag. “You’ll find the Energy Star rating–as well as the estimated energy use and cost per year–on the yellow tag displayed on the front of the machine, ” says Boston-based designer Andrea Zaff. Newer models use less energy( and, therefore, save you money ). Plus, newer dishwashers will run much more softly than old models.

The EPA doesn’t yet offer an official Energy Star rating for ranges, but there are a few ways to tell whether it’ll cut back on energy; head to What to Know When Replacing Your Range for six things to look for.

Also, check with your local electricity or gas provider to see if upgrading your old appliances could got to get a rebate.

Above: Photograph courtesy of The Modern House, from Upstairs, Downstairs: A London Home Designed for Two Households. 10. Don’t forget to make a plan for your old gadget.

If you’ve bought your new appliance from a retailer, they should be able to take your old model away. But be sure to ask whether they are “a certified recycler of old appliances and will provide green services, ” advises contributor Barbara Peck in What to Know When Replacing Your Range. Alternatively, you could take care of the disposal yourself, recycling it, donating it, or selling it on Craigslist or elsewhere, if it’s still got life left in it.

Considering a new scope? Check out Remodeling 101: Beyond Gas vs. Electric: A Quick Guide to Kitchen Stoves and Cooktops.

And, peruse the rest of our 10 Things Nobody Tells You series :P TAGEND

10 Things Nobody Tells You About Plywood 10 Things Nobody Tells You About Basement Well-Being 10 Things Nobody Tells You About Renovating Your Kitchen 10 Things Nobody Tells You About Painting Floors 10 Things Nobody Tells You About Subway Tile 10 Things Nobody Tells You About Painting Furniture 10 Things Nobody Tells You About Washing Your Bedding 10 Things Nobody Tells You About the Trendiest Tile of 2019 10 Things Nobody Tells You About Renovating Your Bathroom 10 Things Nobody Tells You About the Benefits of Wool 10 Things Nobody Tells You About Clawfoot Bathtubs 10 Things Nobody Tells You About Painting Kitchen Cabinets 10 Things Nobody Tells You About Shiplap 10 Things Nobody Tells You About Marble Countertops 10 Things Nobody Tells You About Painting a Room White

Read more: remodelista.com

[myfinancialguideme-blog]

10 Things Nobody Tells You About Replacing Your Kitchen Appliances

New Post has been published on https://financeguideto.com/awesome/10-things-nobody-tells-you-about-replacing-your-kitchen-appliances/

10 Things Nobody Tells You About Replacing Your Kitchen Appliances

Embarking on a full kitchen remodel, or only want to swap out your fridge, dishwasher, or scope for a newer( better-looking, more eco-friendly, quieter) version? Here are a few things to know about stimulating the switch :P TAGEND Above: Photograph from Kitchen of the Week: At Home with the Ultimate Minimalists, the Creators of Cereal Magazine. 1. Know your appliances’ birthdays.

Appliances , now matter how high-tech, have finite lifespans: Fridges have a life expectancy of about 13 years, and gas scopes about 15 years, according to a study from the National Association of Home Builder via This Old House. Dishwashers? They only last about 9 years, but a dishwasher that’s leaking or not cleaning your dishes entails it’s ready to be replaced. Keep track of how old your gadgets are; when they get old, it’s time to shop for a new one.

2. Not sure whether to repair or replace? Remember the 50/50 regulation.

Here’s a good rule of thumb to follow when something goes wrong with your appliance: If it’s more than halfway through its lifespan and will cost half as much to repair as to replace, merely replace it. You may save headaches( and more repairs) in the long run, and upgrading your gadget to a newer model may be greener and save you some fund, too.( Simply remember to recycle the old model: watch phase no. 10 ).

Above: Photograph by Haris Kenjar from Before& After: A Modern Makeover for a Circa-1 850 s Row House in Jersey City. 3. You should take a personality test.

Or rather, a kitchen personality exam. Particularly if you’re doing a full kitchen remodel, you have the chance to consider how you really use your kitchen and select appliances accordingly. Do you host every vacation for your big extended family and host dinner parties every weekend? You might want to consider getting two ovens. Do you cook in large batches every weekend and freeze family snacks for the week ahead? You’ll want to be sure you get a fridge with a spacious freezer section. Largely order takeout? Maybe you can get away with a dishwasher drawer instead of a full-sized dishwasher. Nowadays there are appliance options for every sort of cook; don’t just go with the status quo.

4. Make sure the new model will fit through the door.

The old carpentry adage “Measure twice, cut once” applies here. Measure the area where your new appliance “il be gone” not once , not twice, but three times before you perpetrate. For fridges, you’ll need to leave an inch of space on every side to prevent overheating( read more in Remodeling 101: How to Choose Your Refrigerator ). And don’t forget to account for the sway of your refrigerator’s door( s) and allow ample space for the oven door to open.( Whoever installed the oven in my tiny apartment kitchen in Manhattan clearly didn’t do this–the door only opens halfway .) And, make sure the new appliance will accommodate through the door.

Above: Photograph by Heju( @hejustudio) from Kitchen of the Week: Two Young Paris Architects Completely Redo Their Kitchen for Under $4,300. 5. Got a small kitchen? There are appliances for that.

It’s time rethink the 1950 s bigger-is-better attitude towards kitchen gadgets. If you have a small space( or don’t want to allot precious kitchen real estate to an SUV-sized fridge ), there are plenty of good-looking, hard-working compact versions on the market. For simply a few, assure our posts on Skinny Refrigerators, 36-Inch Counter-Depth Refrigerators, Appliances for Small Kitchens, Skinny Kitchen Ranges( Freestanding 24 -Inches ), and even tiny Under-Counter Refrigerator Drawers.

6. Your new appliance( s) could be a focal point.

Nowadays, kitchen appliances are not just workhorse necessities, but can be a design element all on their own. Whether you’re scrapping your kitchen and starting fresh or only swapping out the gadgets, consider investing in a high-style range to be the center of your kitchen( like one of our favorite retro kitchen ranges ), or build the refrigerator an opportunity for display( might we suggest glass door refrigerators ?).

Above: Photograph by Anna Pirkola from Kitchen of the Week: A Stylist’s $ 3,400 Kitchen Makeover, DIY Scandi Edition. 7. Time your shopping right to get a discount.

NerdWallet indicates buying a previous gadget model after the latest model is released( it’ll likely be discounted ), or shopping around on a few major vacations like Memorial Day, Fourth of July, and Labor Day. Or, buy gently used gadgets: insure Remodeling 101: 8 Sources for Used Appliance.

Above: Photograph by Richard Round-Turner from A Star Is Born: A Rehabbed London Maisonette from a Newly Minted Designer, High/ Low Secret Included. 8. It might be a simple swap.

If you’re simply swapping out your fridge, scope, or dishwasher for a new model in the same place, you might not need to re-wire or re-plumb. Read up on What to Know When Replacing Your Fridge and What to Know When Replacing Your Dishwasher and consult an electrician or plumber to be sure.

9. You could save money( and energy ).

When shopping for new fridges and dishwashers, look for the Energy Star tag. “You’ll find the Energy Star rating–as well as the estimated energy use and cost per year–on the yellow tag displayed on the front of the machine, ” says Boston-based designer Andrea Zaff. Newer models use less energy( and, hence, save you money ). Plus, newer dishwashers will operate much more softly than old models.

The EPA doesn’t yet provide an official Energy Star rating for ranges, but there are a few ways to tell whether it’ll cut back on energy; head to What to Know When Replacing Your Range for six things to look for.

Also, check with your local electricity or gas provider to see if upgrading your old gadgets could get you a rebate.

Above: Photograph courtesy of The Modern House, from Upstairs, Downstairs: A London Home Designed for Two Households. 10. Don’t forget to make a plan for your old appliance.

If you’ve bought your new gadget from a retailer, they should be able to take your old model away. But be sure to ask whether they are “a certified recycler of old gadgets and will provide green services, ” advises contributor Barbara Peck in What to Know When Replacing Your Range. Alternatively, you could take care of the disposal yourself, recycling it, donating it, or selling it on Craigslist or elsewhere, if it’s still got life left in it.

Considering a new range? Check out Remodeling 101: Beyond Gas vs. Electric: A Quick Guide to Kitchen Stoves and Cooktops.

And, peruse the rest of our 10 Things Nobody Tells You series :P TAGEND

10 Things Nobody Tells You About Plywood 10 Things Nobody Tells You About Basement Well-Being 10 Things Nobody Tells You About Renovating Your Kitchen 10 Things Nobody Tells You About Painting Floors 10 Things Nobody Tells You About Subway Tile 10 Things Nobody Tells You About Painting Furniture 10 Things Nobody Tells You About Washing Your Bedding 10 Things Nobody Tells You About the Trendiest Tile of 2019 10 Things Nobody Tells You About Renovating Your Bathroom 10 Things Nobody Tells You About the Benefits of Wool 10 Things Nobody Tells You About Clawfoot Bathtubs 10 Things Nobody Tells You About Painting Kitchen Cabinet 10 Things Nobody Tells You About Shiplap 10 Things Nobody Tells You About Marble Countertops 10 Things Nobody Tells You About Painting a Room White

Read more: remodelista.com

[financingideas-blog]

10 Things Nobody Tells You About Replacing Your Kitchen Appliances

New Post has been published on https://financeqia.com/awesome/10-things-nobody-tells-you-about-replacing-your-kitchen-appliances/

10 Things Nobody Tells You About Replacing Your Kitchen Appliances

Embarking on a full kitchen remodel, or merely want to swap out your fridge, dishwasher, or range for a newer( better-looking, more eco-friendly, quieter) version? Here are a few things to know about inducing the switching :P TAGEND Above: Photograph from Kitchen of the Week: At Home with the Ultimate Minimalists, the Creators of Cereal Magazine. 1. Know your appliances’ birthdays.

Appliances , now matter how high-tech, have finite lifespans: Fridges have a life expectancy of about 13 years, and gas ranges about 15 years, according to a study from the National Association of Home Builders via This Old House. Dishwashers? They only last about 9 years, but a dishwasher that’s leaking or not cleaning your dishes entails it’s ready to be replaced. Keep track of how old your gadgets are; when they get old, it’s time to shop for a new one.

2. Not sure whether to repair or replace? Remember the 50/50 rule.

Here’s a good rule of thumb to follow when something goes wrong with your appliance: If it’s more than halfway through its lifespan and will cost half as much to repair as to replace, only replace it. You may save headaches( and more mends) in the long run, and upgrading your gadget to a newer model may be greener and save you some fund, too.( Simply remember to recycle the old model: consider phase no. 10 ).

Above: Photograph by Haris Kenjar from Before& After: A Modern Makeover for a Circa-1 850 s Row House in Jersey City. 3. You should take a personality test.

Or instead, a kitchen personality exam. Particularly if you’re doing a full kitchen remodel, you have the chance to consider how you really use your kitchen and select gadgets accordingly. Do you host every holiday for your big extended family and host dinner parties every weekend? You might want to consider get two ovens. Do you cook in big batches every weekend and freeze household dinners for the week ahead? You’ll want to be sure you get a fridge with a spacious freezer segment. Largely order takeout? Maybe you can get away with a dishwasher drawer instead of a full-sized dishwasher. Nowadays there are appliance options for every sort of cook; don’t just go with the status quo.

4. Make sure the new model will fit through the door.

The old carpentry adage “Measure twice, cut once” applies here. Measure the area where your new appliance “il be gone” not once , not twice, but three times before you perpetrate. For fridges, you’ll need to leave an inch of space on every side to prevent overheating( read more in Remodeling 101: How to Choose Your Refrigerator ). And don’t forget to account for the swinging of your refrigerator’s door( s) and allow ample space for the oven door to open.( Whoever installed the oven in my tiny apartment kitchen in Manhattan clearly didn’t do this–the door only opens halfway .) And, make sure the new gadget will accommodate through the door.

Above: Photograph by Heju( @hejustudio) from Kitchen of the Week: Two Young Paris Architects Completely Redo Their Kitchen for Under $4,300. 5. Got a small kitchen? There are appliances for that.

It’s time rethink the 1950 s bigger-is-better attitude towards kitchen gadgets. If you have a small space( or don’t want to allot precious kitchen real estate to an SUV-sized fridge ), there are plenty of good-looking, hard-working compact versions on the market. For merely a few, see our posts on Skinny Refrigerators, 36-Inch Counter-Depth Refrigerators, Appliances for Small Kitchens, Skinny Kitchen Ranges( Freestanding 24 -Inches ), and even tiny Under-Counter Refrigerator Drawers.

6. Your new gadget( s) could be a focal point.

Nowadays, kitchen appliances are not just workhorse necessities, but can be a design element all on their own. Whether you’re scrapping your kitchen and starting fresh or only swapping out the appliances, consider investing in a high-style range to be the center of your kitchen( like one of our favorite retro kitchen ranges ), or construct the refrigerator an opportunity for display( might we suggest glass door refrigerators ?).

Above: Photograph by Anna Pirkola from Kitchen of the Week: A Stylist’s $ 3,400 Kitchen Makeover, DIY Scandi Edition. 7. Time your shopping right to get a discount.

NerdWallet suggests buying a previous appliance model after the latest model is released( it’ll likely be discounted ), or shopping around on a few major holidays like Memorial Day, Fourth of July, and Labor Day. Or, buy gently used gadgets: consider Remodeling 101: 8 Sources for Used Appliance.

Above: Photograph by Richard Round-Turner from A Star Is Born: A Rehabbed London Maisonette from a Newly Minted Designer, High/ Low Secrets Included. 8. It might be a simple swap.

If you’re simply swapping out your fridge, range, or dishwasher for a new model in the same place, you might not need to re-wire or re-plumb. Read up on What to Know When Replacing Your Fridge and What to Know When Replacing Your Dishwasher and consult an electrician or plumber to be sure.

9. You could save money( and energy ).

When shopping for new fridges and dishwashers, look for the Energy Star tag. “You’ll find the Energy Star rating–as well as the estimated energy use and cost per year–on the yellow tag displayed on the front of the machine, ” says Boston-based architect Andrea Zaff. Newer models use less energy( and, hence, save you money ). Plus, newer dishwashers will run much more softly than old models.

The EPA doesn’t yet provide an official Energy Star rating for scopes, but there are a few ways to tell whether it’ll cut back on energy; head to What to Know When Replacing Your Range for six things to look for.

Also, check with your local electricity or gas provider to see if upgrading your old appliances could got to get a rebate.

Above: Photograph courtesy of The Modern House, from Upstairs, Downstairs: A London Home Designed for Two Households. 10. Don’t forget to make a plan for your old gadget.

If you’ve bought your new gadget from a retailer, they should be able to take your old model away. But be sure to ask whether they are “a certified recycler of old gadgets and will provide green services, ” advises contributor Barbara Peck in What to Know When Replacing Your Range. Alternatively, you could take care of the disposal yourself, recycling it, donating it, or selling it on Craigslist or elsewhere, if it’s still get life left in it.

Considering a new scope? Check out Remodeling 101: Beyond Gas vs. Electric: A Quick Guide to Kitchen Stoves and Cooktops.

And, peruse the rest of our 10 Things Nobody Tells You series :P TAGEND

10 Things Nobody Tells You About Plywood 10 Things Nobody Tells You About Basement Well-Being 10 Things Nobody Tells You About Renovating Your Kitchen 10 Things Nobody Tells You About Painting Floors 10 Things Nobody Tells You About Subway Tile 10 Things Nobody Tells You About Painting Furniture 10 Things Nobody Tells You About Washing Your Bedding 10 Things Nobody Tells You About the Trendiest Tile of 2019 10 Things Nobody Tells You About Renovating Your Bathroom 10 Things Nobody Tells You About the Benefits of Wool 10 Things Nobody Tells You About Clawfoot Bathtubs 10 Things Nobody Tells You About Painting Kitchen Cabinets 10 Things Nobody Tells You About Shiplap 10 Things Nobody Tells You About Marble Countertops 10 Things Nobody Tells You About Painting a Room White

Read more: remodelista.com

[researching01]

7 Things Nobody Tells You About Renovating an Old Farmhouse

New Post has been published on https://headacheshelp.com/awesome/7-things-nobody-tells-you-about-renovating-an-old-farmhouse/

7 Things Nobody Tells You About Renovating an Old Farmhouse

You’ve observed it: a beautiful, rambling old farmhouse, with wide-plank wood floors, original paned windows, maybe a big barn. And, out back, a few trees and a shady, rolling lawn–the perfect place to hang a hammock, just as soon as you tackle your own Fixer-Upper-style renovation. But be advised before you start: What you love most about your farmhouse might cause you the most headaches. Here’s what to know before embarking on a farmhouse renovation( and what to leave as-is ).

Above: Photography by April Valencia, courtesy of Rip& Tan, from The Catskills Farmhouse of Two Brooklyn Creatives, Weekend DIY Edition. 1. Those wood floors might need to replaced.

The good news is, good-quality wood floors can withstand a lot of refinishing–the maximum is about 10, according to Denver-based MacDonalds Hardwoods–which takes more hour but is less expensive than total replacement. But if the original wood floors in your farmhouse are getting close to that number, or are just in bad shape( MacDonalds Hardwoods says to look for warping, loose committees, termite damage, or under-floor damage ), you may be looking at total-floor replacement while you’re living there.( Otherwise, consult What to Know About the 4 Most Popular Wood Floor Finishes for a few options .)

2. There may be hidden dangers.

Keep in intellect that an old farmhouse( or any home built before 1978) may have lead paint on the walls–or asbestos. Lead paint is particularly a problem in window wells, where the paint can flake off or pulverize when the windows open and close. Check with the local authorities for the best, safest style to proceed, and be sure to work with contractors trained to handle toxic substances.

Above: Photography by Justine Hand for Remodelista, from Saved from Abandonment: A Historic Hudson Valley Farmhouse Receives the Ultimate Makeunder.

3. You could spend a small fortune upgrading the basics. The rule of thumb with any remodeling project is to remember that it will cost more than you think–but this is especially the case with old homes like farmhouses. Once you start, you’re sure to discover things that need replacing: old electrical systems( knob-and-tube wiring will need to be brought up to code ), water pipe, and the HVAC system. If you don’t have room for a full-blown HVAC system or want to minimize the disorder to the bones of the chamber of representatives, consider an efficient mini-duct HVAC system, with much smaller tubing and ducts that can be fitted easily and unobtrusively into the walls or floors.

Above: Photograph from The Country Rental: A Floating Farmhouse in Upstate New York.

4. The charming old windows might be drafty. Those beautiful old windows might mean a long, chilly winter, since they’re likely single-( not double-) paned. And replacing them can be costly: up to $ 800 or $1000 just for the window, according to Angie’s List. But some experts say somewhat draftier windows are a small price to pay for having original windows: “Never, never, never toss out old windows, ” Ipswich, Massachusetts-based architect Matthew Cummings told Forbes. Newer windows don’t last as long and aren’t built as sustainably, he says. Consider having old windows repaired by an expert , not replaced.

Above: Photograph by Amanda Kirkpatrick and styling by Anna Molvik, from A Renovated Farmhouse in Bedford, NY, with Scandinavian Influences.

5. Soapstone counters are not quite zero-maintenance.

Soapstone is a popular choice for farmhouse-style interiors, and it’s generally a rugged one: It’s heat-resistant, stain-proof, and isn’t affected by acidic materials. But be forewarned that it can nick and scratching easily( cutting boards are important ). Four years in, Fan reports, her soapstone counters have worn unequally and dent from even dropping a can.( Read her full run-down in Soapstone Counters: Are They Worth It ?) And soapstone does require spa treatments–in the form of mineral-oil massages–if a dark, virtually black look is what you’re going for. Read more in Remodeling 101: Soapstone Countertops.

6. That clawfoot tub may have to go. You might be picturing a vintage, cast-iron bathtub in your farmhouse. But sloping floors aren’t a good match for freestanding baths, and the floors might not be able to support the weight of the bath filled with water( and a human ). For more, ensure 10 Things Nobody Tells You About Clawfoot Bathtubs.

Above: Photograph by Mylene Pionilla, from Architect Visit: An Antiquarian Farmhouse in Upstate New York Transformed.

7. Last but not least, get an inspection.

Consult an expert( or two ): An official inspector can tell you the nitty-gritty of your house–before you start tearing down walls.

For much more on the fine points of buying( and renovating) old homes, ensure What to Know When Buying a House: 8 Small Signs that Signal Big Problems–as well as 6 Problems that Shouldn’t Be Dealbreakers.

And for more in our Things Nobody Tells You series, assure :P TAGEND

10 Things Nobody Tells You About Replacing Your Kitchen Appliances 10 Things Nobody Tells You About Plywood 10 Things Nobody Tells You About Basement Well-Being 10 Things Nobody Tells You About Renovating Your Kitchen 10 Things Nobody Tells You About Painting Floors 10 Things Nobody Tells You About Subway Tile 10 Things Nobody Tells You About Painting Furniture 10 Things Nobody Tells You About Washing Your Bedding 10 Things Nobody Tells You About the Trendiest Tile of 2019 10 Things Nobody Tells You About Renovating Your Bathroom 10 Things Nobody Tells You About the Benefits of Wool 10 Things Nobody Tells You About Clawfoot Bathtubs 10 Things Nobody Tells You About Painting Kitchen Cabinets 10 Things Nobody Tells You About Shiplap 10 Things Nobody Tells You About Marble Countertops 10 Things Nobody Tells You About Painting a Room White

N.B .: Featured photograph by Greta Rybus for Remodelista, from The House That Craigslist Built: A Bare-Bones Farmhouse in Midcoast Maine.

Read more: remodelista.com

[businessguide12-blog]

Remodeling 101: All About Stair Runners

New Post has been published on https://businessqia.com/awesome/remodeling-101-all-about-stair-runners/

Remodeling 101: All About Stair Runners

Over 10 years of Remodelista, we’ve seen designers, designers, and homeowners do inventive things with stair athletes( which, historically, tend to be a little uninteresting ). There was this dramatic green stair runner, and this casual painted runner. But do stair athletes actually have a purpose? Do you really need one?

To get some answers to common questions about stair athletes, we talked with designer Victoria Kirk, who established Victoria Kirk Interiors in 2007. Her company, based in Larchmont and Sag Harbor, New York, concentrates mostly on residencies in Westchester, Sag Harbor, and New York City. After more than two decades in the business, Kirk can provide plenty of intel on the subject of carpeting for stairs.

Above: A clean bamboo-and-silk runner by Melbourne custom rug maker Bibi Vero in Before& After: A Melbourne Remodel with a Masculine Touch. What are the pros and cons of stair athletes?

There are a number of reasons to install carpeting on stairs. Kirk cites two big pros: It reduces noise just made by people clattering up and down the stairs, and it adds a finished look to a stairway. Plus, in some circumstances, it constructs stairs safer–for example, young children are less likely to get hurt by falling on padded steps.

But Kirk doesn’t feel runners always induce stairs safer. “I live in an old house where the stairs are super steep and the treads are really narrow. If I had carpet on them, I’d be afraid of sliding. I favor bare timber. But stairs with deeper treads should be fine with carpet.” Obviously, to be safe, stair athletes should not be made of slippery material( such as silk or linen ). And they must be properly installed with no loose corners to trip over.

Another pro: Foot traffic can mar the finish on wooden treads and leave scuff marks on painted risers( the vertical part of the stairs, between the treads ). A athlete protects both treads and risers from wear and tear.( Another alternative: the no-shoes-in-the house rule .)

Still, the looking is more suited to traditional homes than modern ones. And bare wood steps are easier to keep clean than carpeted stairs. Vacuuming stairs is usually an awkward chore.

Above: Perhaps the most inventive stair athlete we’ve seen: a runner spotted in A Victorian Transformation, Dublin Style. What’s the best material for a stair athlete?

“An all-wool carpet is preferable aesthetically, ” says Kirk. “There’s a theory that a synthetic or mix will hold up better, but I don’t really believe it. People first and foremost want the looks, and wool delivers that.” She’s a big fan of the striped flat-weave athletes made of 100 percent wool by the British company Roger Oates Design.

Natural fibers like sisal and jute may not be your best choice, as they’re easily stained and is also available rough on bare foot. But, she says, “sisal or jute is a great look and it’s cheap.” These days indoor/ outdoor polypropylene that looks like sisal is becoming popular–it’s durable and easy to clean.

Above: A close-up of a “waterfall” installation with bound edges in their own homes of Michael Chabon and Ayelet Waldman; for more go to The Mysteries of Berkeley: A Literary Couple at Home. Is a darknes color better than light? And patterns–yes or no?

“With a athlete, you don’t want to go too light or too dark, ” says Kirk. “Dark depicts all the lint, while light-colored carpeting indicates grime and scuffs. I always push for a medium tone.”

As for the pattern, Kirk says, “If there’s a moment to have some fun on the stairs, go for it. I like horizontal stripes, like the Roger Oates flatweave.” What she doesn’t recommend: “Bold geometric contrasting patterns. They can be dizzying, and stimulate stairs hard to navigate–you can’t figure out where your next step is.”

Another thing to keep in mind with a pattern: If you need to match the pattern so every step lookings the same, you could end up with a lot of waste( and increased cost ).

Above: In Reader Rehab: A Country House Makeover Courtesy of White Paint, the Pieterdam wool runner from Fibreworks cost $894, installing included. How are stair athletes installed?

Most homeowners aren’t aware that there are two styles of installing for stair runners: “Waterfall, ” in which the runner flows over the stairs and is tacked down at the base of each step; and “Hollywood, ” where the runner is tacked down around the tread and accommodates close to the risers.

“The decision usually depends on how your stairs are constructed, ” says Kirk. “If there’s a quarter-round molding under the nose of the tread, you use Waterfall so the carpet falls gracefully over that edge. If there’s no molding, you go with the more tight-fitting installation, Hollywood.”

Unseen staples typically hold the padding and athlete securely in place, though sometimes a “tackless strip” is used–a piece of timber that runs the thicknes of the steps and is studded with sharp nails or tacks. Typically, stair runners are installed over a padding or underlay, which both reduces noise and protects the carpet from wear. A bonus effect: cushioning makes stairs feel softer underfoot, a boon to newborn navigating on their hands and knees.

And what about those rods that hold stair athletes in place? “Maybe for a grand staircase in a house in Greenwich, Connecticut, ” says Kirk. “But they’re purely decorative.”

Above: A dramatic option, as seen in A Sympathetic Renovation in Stoke Newington, London. Is there a rule of thumb for how much of the tread should be covered?

“It depends how wide your stairs are, ” says Kirk. “In a three- to four-foot-wide staircase, you want to leave about three or four inches of wood exposed on either side. But if your stairs are five feet across, you’d adjust your athlete proportionally–maybe to a seven-inch expose on each side.”

As for “wall-to-wall” carpeting over stairs: “Nobody does that anymore, ” says Kirk.

Are stair athletes attained in standard widths?

They are. The Roger Oates flatweave, for example, comes in three thickness: 24 inches, 27 inches, and 33.5 inches. But you are able to have athletes made to order. “Often people buy broadloom and have it cut to size, ” says Kirk. In those cases, you’ll need to have the edges bound.

Above: A stair runner alternative, on the inexpensive. For more, ensure Remodeling 101: Nautical Stripes on the Stairs. How much does a stair athlete cost?

That depends on your selection of carpeting and the complexity of installation. “A standard-size runner is your most cost-effective choice, ” says Kirk. “But the labor always expenses more than the material.”

Kirk offers a ballpark calculate of $20 to $50 per square foot for broadloom, but that’s only the beginning. “The add-ons include padding, edging, and then the installation itself. If you have curved steps or landings, for example, pie-shaped pieces are needed to fit them.” And to get the job done right, you’ll want to hire experienced installers. That style your runner is sure to wear well and to enhance your home.

What if I favor bare stairs but like the look of a runner?

You can save money by simply painting a runner( or stripes) on the stairs, as in this Remodeling 101 post on Nautical Stripes on the Stairs. Just choose a coloring that contrasts nicely for the purposes of an instant athlete effect , no vacuuming needed.

More Remodeling 101 guides :P TAGEND

Remodeling 101: 12 Essential Tips-off for the Perfect Paint Job Remodeling 101: A Guide to the Only 7 Types of Tile You Need to Know Remodeling 101: Consider the Baseboard( and, What You Need to Know )

Read more: remodelista.com

[businessguide12-blog]

Remodeling 101: All About Stair Runners

New Post has been published on https://businessguideto.com/awesome/remodeling-101-all-about-stair-runners/

Remodeling 101: All About Stair Runners

Over 10 years of Remodelista, we’ve seen designers, designers, and homeowners do inventive things with stair athletes( which, historically, tend to be a little uninteresting ). There was this dramatic green stair athlete, and this casual painted runner. But do stair athletes actually have a purpose? Do you really need one?

To get some answers to common questions about stair runners, we talked with designer Victoria Kirk, who established Victoria Kirk Interiors in 2007. Her company, based in Larchmont and Sag Harbor, New York, concentrates mostly on residences in Westchester, Sag Harbor, and New York City. After more than two decades in the business, Kirk can provide plenty of intel on the subject of carpeting for stairs.

Above: A clean bamboo-and-silk runner by Melbourne custom rug maker Bibi Vero in Before& After: A Melbourne Remodel with a Masculine Touch. What are the pros and cons of stair athletes?

There are a number of reasons to install carpeting on stairs. Kirk cites two big pros: It reduces noise just made by people clattering up and down the stairs, and it adds a finished look to a stairway. Plus, in some circumstances, it constructs stairs safer–for example, young children are less likely to get hurt by dropping on padded steps.

But Kirk doesn’t feel athletes always construct stairs safer. “I live in an old house where the stairs are super steep and the treads are really narrow. If I had carpet on them, I’d be afraid of sliding. I favor bare timber. But stairs with deeper treads should be fine with carpet.” Obviously, to be safe, stair athletes should not be made of slippery material( such as silk or linen ). And they must be properly installed with no loose corners to trip over.

Another pro: Foot traffic can mar the finish on wooden treads and leave scuff marks on painted risers( the horizontal part of the stairs, between the treads ). A runner protects both treads and risers from wear and tear.( Another option: the no-shoes-in-the house rule .)

Still, the appear is more suited to traditional homes than modern ones. And bare wood steps are easier to keep clean than carpeted stairs. Vacuuming stairs is usually an awkward chore.

Above: Perhaps the most inventive stair runner we’ve seen: a athlete spotted in A Victorian Transformation, Dublin Style. What’s very good material for a stair runner?

“An all-wool carpet is preferable aesthetically, ” says Kirk. “There’s a hypothesi that a synthetic or blend will hold up better, but I don’t actually believe it. People first and foremost want the seems, and wool delivers that.” She’s a big fan of the striped flat-weave athletes made of 100 percentage fleece by the British company Roger Oates Design.

Natural fibers like sisal and jute were not able to be your best choice, as they’re easily stained and can be rough on bare foot. But, she says, “sisal or jute is a great look and it’s cheap.” These days indoor/ outdoor polypropylene that looks like sisal is becoming popular–it’s durable and easy to clean.

Above: A close-up of a “waterfall” installation with bind edges in their own homes of Michael Chabon and Ayelet Waldman; for more go to The Mysteries of Berkeley: A Literary Couple at Home. Is a darknes color better than light? And patterns–yes or no?

“With a runner, you don’t want to go too illuminated or too dark, ” says Kirk. “Dark proves all the lint, while light-colored carpeting presents clay and scuffs. I always push forward a medium tone.”

As for the pattern, Kirk says, “If there’s a moment to have some fun on the stairs, go for it. I like vertical stripes, like the Roger Oates flatweave.” What she doesn’t recommend: “Bold geometric contrasting patterns. They can be dizzying, and build stairs hard to navigate–you can’t figure out where your next step is.”

Another thing to keep in mind with a pattern: If you need to match the pattern so each step seems the same, you could end up with a lot of waste( and increased cost ).

Above: In Reader Rehab: A Country House Makeover Courtesy of White Paint, the Pieterdam wool runner from Fibreworks cost $894, installing included. How are stair athletes installed?

Most homeowners aren’t aware that there are two styles of installation for stair runners: “Waterfall, ” in which the runner flows over the stairs and is tacked down at the base of each step; and “Hollywood, ” where the athlete is tacked down around the tread and fits close to the risers.

“The decision usually depends on how your stairs are constructed, ” says Kirk. “If there’s a quarter-round molding under the nose of the tread, you use Waterfall so the carpet autumns gracefully over that edge. If there’s no molding, you go with the more tight-fitting installation, Hollywood.”

Unseen staples typically hold the padding and athlete securely in place, though sometimes a “tackless strip” is used–a piece of timber that runs the width of the steps and is studded with sharp nails or tacks. Typically, stair athletes are installed over a padding or underlay, which both reduces noise and protects the carpet from wear. A bonus effect: cushioning constructs stairs feel softer underfoot, a boon to babies navigating on their hands and knees.

And what about those rods that hold stair runners in place? “Maybe for a grand staircase in a house in Greenwich, Connecticut, ” says Kirk. “But they’re purely decorative.”

Above: A dramatic option, as seen in A Sympathetic Renovation in Stoke Newington, London. Is there a rule of thumb for how much of the tread should be covered?

“It depends how wide your stairs are, ” says Kirk. “In a three- to four-foot-wide staircase, you want to leave about three or four inches of timber uncovered on either side. But if your stairs are five feet across, you’d adjust your runner proportionally–maybe to a seven-inch reveal on each side.”

As for “wall-to-wall” carpeting over stairs: “Nobody does that anymore, ” says Kirk.

Are stair athletes stimulated in standard thickness?

They are. The Roger Oates flatweave, for example, comes in three thickness: 24 inches, 27 inches, and 33.5 inches. But you are able to have runners made to order. “Often people buy broadloom and have it cut to size, ” says Kirk. In those cases, you’ll need to have the edges bound.

Above: A stair athlete alternative, on the cheap. For more, assure Remodeling 101: Nautical Stripes on the Stairs. How much does a stair runner expense?

That depends on your selection of carpeting and the complexity of installation. “A standard-size runner is your most cost-effective choice, ” says Kirk. “But the labor always expenses more than the material.”

Kirk offers a ballpark estimate of $20 to $50 per square foot for broadloom, but that’s only the beginning. “The add-ons include padding, edging, and then the installation itself. If you have curved steps or landings, for example, pie-shaped pieces are needed to fit them.” And to get the job done right, you’ll want to hire experienced installers. That style your runner is sure to wear well and to enhance your home.

What if I prefer bare stairs but like the appear of a athlete?

You can save money by simply painting a athlete( or stripes) on the stairs, as in this Remodeling 101 post on Nautical Stripes on the Stairs. Just choose a color that contrasts nicely for the purposes of an instant runner consequence , no vacuuming needed.

More Remodeling 101 guidebooks :P TAGEND

Remodeling 101: 12 Essential Tips for the Perfect Paint Job Remodeling 101: A Guide to the Only 7 Kinds of Tile You Need to Know Remodeling 101: Consider the Baseboard( and, What You Need to Know )

Read more: remodelista.com

[fitnessexpert00-blog]

10 Paint Colors with Cult Followings: Architects’ All-Time Favorite Paint Picks

New Post has been published on https://fitnessqia.com/awesome/10-paint-colors-with-cult-followings-architects-all-time-favorite-paint-picks/

10 Paint Colors with Cult Followings: Architects’ All-Time Favorite Paint Picks

Why reinvent the wheel every time you need to paint a room? Even architects and decorators turn to their favorite colors–versatile and universally flattering–again and again. The members of the Remodelista Architect and Designer Directory were generous enough to let us in on their secrets.

1. Simply White from Benjamin Moore Above: Benjamin Moore’s Simply White is the white chosens more often than any other. Says SF designer Kriste Michelini, “It is my go-to white–fresh, versatile, and warm–and it works in any home, whether traditional or modern, with a warm or cool palette.” It’s also the pick of NYC designer Lauren Rubin, who called it “the perfect wall color.”( N.B .: Benjamin Moore opted Simply White as its 2016 Color of the Year .)

Shown here, architects Gregory Merkel and Ana Catalina Rojas used Simply White throughout their remodel featured in Two Young Designer Tackle Their Own Brooklyn Townhouse. Photograph by Carl Bellavia, courtesy of Gregory Merkel.

( For much more on what to know about white, see 10 Things Nobody Tells You About Painting a Room White .)

2. Hague Blue from Farrow& Ball Above: Eva Dornstreich of The Brooklyn Home Co . nominated Farrow& Ball’s Hague Blue to the cult listing. “It’s a beautiful, deep, rich coloring that can be at once bold and understated, ” she says.

Star London chef Skye Gyngell utilized Hague Blue on her British Standard kitchen cabinet, shown here and featured in In the Kitchen with Skye Gyngell, London’s Chef du Jour. Photograph by Alexis Hamilton, politenes of British Standard.

3. White Dove from Benjamin Moore Above: Alison Davin of Jute in San Francisco says, “Benjamin Moore’s White Dove has a cult following in the white world. Its warm undercurrent has a universal appeal and works well in most spaces.” The designer used the color in the San Anselmo living room shown here. Photograph by Matthew Millman, politenes of Jute.

It’s also the coloring chosen by designer John Alee and designer Hannah Childs in Before& After: A Summer Cottage Reborn on the Connecticut Coast.

4. Iron Mountain from Benjamin Moore Above: Benjamin Moore’s Iron Mountain is the dark colour chosen more often than any other. Says Los Angeles architect Oonagh Ryan, “I use this paint color on almost every project. It’s a warm gray with brown undercurrents and matches natural steel and sheet metal perfectly.”

Tatum Kendrick of Studio Hus in Los Angeles used the color in the Venice Beach bedroom shown here. “It can go classic, modern, or earthy depending on your environment and furniture, ” she says. Photograph courtesy of Studio Hus.

5. Chantilly Lace from Benjamin Moore Above: Lewis Butler of Butler Armsden Architect nominated Benjamin Moore’s Chantilly Lace to the cult listing: “It’s a terrible name, but the best white out there, ” he says. The firm employed it on the walls of its new San Francisco offices.

Architect Elizabeth Roberts use Chantilly Lace in this Williamsburg townhouse featured in A Whole-House Overhaul in Brooklyn with a High/ Low Mix. Photograph courtesy of Elizabeth Roberts.

6. Nimbus from Benjamin Moore Above: NYC interior designer Bella Mancini named Benjamin Moore’s Nimbus to the greatest-hits list. “We use it again and again and again, ” she says, “We pick it without even meaning to. It is a versatile gray that runs bluer or browner, depending on the light.”

Remodelista contributing editor Justine Hand used Nimbus on the bed frame in her daughter Solvi’s room, shown here and featured in The Soulful Side of Old Cape Cod: Justine’s Family Cottage. Photograph by Matthew Williams for Remodelista.

7. Thunder from Benjamin Moore Above: NYC designer Elizabeth Bolognino named Benjamin Moore’s Thunder to the cult list. “I love how it changes from gray to beige to white. It is the perfect background for accent colorings while keeping things subdued and sophisticated, ” she says.( Bolognino herself mixes a custom version of 25 percentage Thunder and 75 percent white .)

Justine Hand used Thunder to create a forest pattern in her son Oliver’s room. Find more at DIY: The Stenciled Kid’s Room, Boreal Forest Edition. Photograph by Justine Hand.

8. Clunch from Farrow& Ball Above: Jessica Speeckaert of Chambers& Chambers Architects in Mill Valley, California, says Clunch by Farrow& Ball is the cult favorite in their office. “It has a sophisticated warmth and adds a timeless elegance to any room, ” she says. Firm principal Barbara Chambers used the color in her own living room, shown here. Photograph courtesy of Chambers+ Chambers.

Paint expert Eve Ashcraft and novelist Heather Smith MacIsaac also picked Clunch as a favorite soft white in our story Expert Advice: Living in Black and White.

9. Pitch Black from Farrow& Ball Above: San Francisco designer Nicole Hollis picked Farrow& Ball’s Pitch Black as her favorite, shown here in the library of a prewar residency in Pacific Heights, San Francisco. Photograph by Laure Joliet, courtesy of Nicole Hollis.

It’s also a favorite of NYC architect Steven Harris, who chose the colour for our story Black Magic: Architects’ 8 Top Paint Picks.

10. Calamine from Farrow& Ball Above: Los Angeles design firm Alexandra Loew( formerly From the Desk of Lola) added Farrow& Ball’s Calamine to the cult list: “It’s the perfect nonwhite neutral, conservative as navy blue, while sweet, tender, and unassuming as pink.” LA designer Alexandra Angle employed Calamine as an accent wall, putting it on our list of The 10 Best Pink Paints.

Candace Partain used Calamine in her daughters’ bedroom in their Bozeman, Montana, home, presented. Photograph by Vanessa Pleasants, featured in An Inspirational Montana Home, courtesy of Vintage Whites.

For more on paint, ensure :P TAGEND

Expert Advice: 12 Essential Tips for the Perfect Paint Job How to Paint Kitchen Cabinets: 5 Tips-off from a Master Painter 10 Easy Pieces: Architects’ White Exterior Paint Picks

N.B .: This post provides an update; the original tale ran on June 13, 2016.

Read more: remodelista.com

[myfinancialguideme-blog]

10 Paint Colors with Cult Followings: Architects’ All-Time Favorite Paint Picks

New Post has been published on https://financeguideto.com/awesome/10-paint-colors-with-cult-followings-architects-all-time-favorite-paint-picks/

10 Paint Colors with Cult Followings: Architects’ All-Time Favorite Paint Picks

Why reinvent the wheel every time “youre going to” paint a room? Even architects and decorators turn to their favorite colors–versatile and universally flattering–again and again. The the representatives of the Remodelista Architect and Designer Directory were generous enough to let us in on their secrets.

1. Simply White from Benjamin Moore Above: Benjamin Moore’s Simply White is the white chooses more often than any other. Says SF designer Kriste Michelini, “It is my go-to white–fresh, versatile, and warm–and it works in any home, whether traditional or modern, with a warm or cool palette.” It’s also the picking of NYC designer Lauren Rubin, who called it “the perfect wall color.”( N.B .: Benjamin Moore chose Simply White as its 2016 Color of the Year .)

Shown here, designers Gregory Merkel and Ana Catalina Rojas use Simply White throughout their remodel featured in Two Young Architect Tackle Their Own Brooklyn Townhouse. Photograph by Carl Bellavia, politenes of Gregory Merkel.

( For much more on what to know about white, assure 10 Things Nobody Tells You About Painting a Room White .)

2. Hague Blue from Farrow& Ball Above: Eva Dornstreich of The Brooklyn Home Co . nominated Farrow& Ball’s Hague Blue to the cult listing. “It’s a beautiful, deep, rich coloring that can be at once bold and understated, ” she says.

Star London chef Skye Gyngell utilized Hague Blue on her British Standard kitchen cabinet, shown here and featured in In the Kitchen with Skye Gyngell, London’s Chef du Jour. Photograph by Alexis Hamilton, politenes of British Standard.

3. White Dove from Benjamin Moore Above: Alison Davin of Jute in San Francisco says, “Benjamin Moore’s White Dove has a cult following in the white world. Its warm undercurrent has a universal appeal and works well in most spaces.” The decorator employed the color in the San Anselmo living room shown here. Photograph by Matthew Millman, politenes of Jute.

It’s also the color chosen by architect John Alee and decorator Hannah Childs in Before& After: A Summer Cottage Reborn on the Connecticut Coast.

4. Iron Mountain from Benjamin Moore Above: Benjamin Moore’s Iron Mountain is the dark coloring opt more often than any other. Says Los Angeles architect Oonagh Ryan, “I use this paint color on almost every project. It’s a warm gray with brown undercurrents and matches natural steel and sheet metal perfectly.”

Tatum Kendrick of Studio Hus in Los Angeles use the color in the Venice Beach bedroom shown here. “It can go classic, modern, or earthy depending on your environment and furniture, ” she says. Photograph courtesy of Studio Hus.

5. Chantilly Lace from Benjamin Moore Above: Lewis Butler of Butler Armsden Architects nominated Benjamin Moore’s Chantilly Lace to the cult listing: “It’s a terrible name, but the best white out there, ” he says. The firm employed it on the walls of its new San Francisco offices.

Architect Elizabeth Roberts employed Chantilly Lace in this Williamsburg townhouse featured in A Whole-House Overhaul in Brooklyn with a High/ Low Mix. Photograph courtesy of Elizabeth Roberts.

6. Nimbus from Benjamin Moore Above: NYC interior designer Bella Mancini named Benjamin Moore’s Nimbus to the greatest-hits list. “We use it again and again and again, ” she says, “We pick it without even meaning to. It is a versatile gray that goes bluer or browner, depending on the light.”

Remodelista contributing editor Justine Hand used Nimbus on the bed frame in her daughter Solvi’s room, shown here and featured in The Soulful Side of Old Cape Cod: Justine’s Family Cottage. Photograph by Matthew Williams for Remodelista.

7. Thunder from Benjamin Moore Above: NYC designer Elizabeth Bolognino named Benjamin Moore’s Thunder to the cult listing. “I love how it changes from gray to beige to white. It is the perfect background for accent colours while keeping things subdued and sophisticated, ” she says.( Bolognino herself mixes a custom version of 25 percentage Thunder and 75 percentage white .)

Justine Hand used Thunder to create a forest pattern in her son Oliver’s room. See more at DIY: The Stenciled Kid’s Room, Boreal Forest Edition. Photograph by Justine Hand.

8. Clunch from Farrow& Ball Above: Jessica Speeckaert of Chambers& Chambers Architect in Mill Valley, California, says Clunch by Farrow& Ball is the cult favorite in their office. “It has a sophisticated warmth and adds a timeless elegance to any room, ” she says. Firm principal Barbara Chambers use the color in her own living room, shown here. Photograph courtesy of Chambers+ Chambers.

Paint expert Eve Ashcraft and writer Heather Smith MacIsaac also picked Clunch as a favorite soft white in our tale Expert Advice: Living in Black and White.

9. Pitch Black from Farrow& Ball Above: San Francisco designer Nicole Hollis picked Farrow& Ball’s Pitch Black as her favorite, shown here in the library of a prewar residency in Pacific Heights, San Francisco. Photograph by Laure Joliet, politenes of Nicole Hollis.

It’s also a favorite of NYC architect Steven Harris, who chose the coloring for our narrative Black Magic: Architects’ 8 Top Paint Picks.

10. Calamine from Farrow& Ball Above: Los Angeles design firm Alexandra Loew( formerly From the Desk of Lola) added Farrow& Ball’s Calamine to the cult listing: “It’s the perfect nonwhite neutral, conservative as navy blue, while sweet, tender, and unassuming as pink.” LA designer Alexandra Angle utilized Calamine as an accent wall, putting it on our listing of The 10 Best Pink Paints.

Candace Partain used Calamine in her daughters’ bedroom in their Bozeman, Montana, home, proven. Photograph by Vanessa Pleasants, featured in An Inspirational Montana Home, politenes of Vintage Whites.

For more on paint, ensure :P TAGEND

Expert Advice: 12 Essential Tips for the Perfect Paint Job How to Paint Kitchen Cabinets: 5 Tips-off from a Master Painter 10 Easy Pieces: Architects’ White Exterior Paint Picks

N.B .: This post is an update; the original narrative go on June 13, 2016.

Read more: remodelista.com