RimPro-Tec | FAQ
RimPro-Tec is the worldwide leader of rim protection and wheel style products. Our products come in numerous colors to match or complement your vehicle. Don’t let your car be de-valued with scuffed, scratched or damaged wheels. Protect and Style them with RimPro-Tec!
Frequently Asked Questions
Can RimPro-Tec go through a car wash?
Yes. RimPro-Tec can stand up to repeated car washing.
Can RimPro-Tec come off while driving?
Properly installed and securely fastened, RimPro-Tec do not come off under normal driving conditions. However, they are a wear item on your car. Periodically check the condition of your RimPro-Tec. Loose color inserts should be fully re-inserted. Damaged RimPro-Tec’s should be replaced in full or by spliced in the section that is damaged. It is recommended that RimPro-Tec be replaced when changing tires on your vehicle, or after 3 years of service life.
Will changing tires damage my RimPro-Tec ?
Care needs to be taken and the proper equipment used, RimPro-Tec can be damaged during tire changes. It is important to let your tire change technician know you have RimPro-Tec installed. Mention that if they use the same technique as when changing tires on “chrome clad” wheels the RimPro-Tec should be fine.
Do RimPro-Tec affect tire balancing or alignment?
No. This has been checked many times. Properly installed RimPro-Tec are a precision product manufactured to tight tolerances. Their installation does not affect wheel balancing. They also do not interfere with or affect the wheel alignment process.
Can I put RimPro-Tec on custom painted wheels?
If the painted surface was done at a professional shop where the paint was properly applied to the wheel the adhesive in RimPro-Tec will not cause damage to the painted surface when removing. If the painted surface is a DIY it depends on surface preparation before painting and quality of paint used. If the paint is on the wheel at least as strong as from can of spray on Plasti Dip applied to a properly cleaned up surface then RimPro-Tecs are safe to apply over the paint.
What if I have clip-on wheel weights?
In many cases RimPro-Tec can be installed to wheels with clip-on wheel balancing weights. The RimPro-Tec track design allows for cutting the track flush with either end of the wheel weight clip. The color insert can then be snapped into the track and bridged across the metal clip.