#solids control

[solidscontrol-blog1]

Brandt King Venom replacement shale shaker screens. Same as King Cobra.

https://www.axsolidcontrol.com

[solidscontrol-blog1]

Brandt 4-inch cones are cones used in mud cleaners and desilters for drilling fluid solids control.They are designed to separate fine solids, sands, and silt from drilling mud in the oil and gas industry.

Key features

Application: A 4-inch desilter cone is typically used as a third stage of solids control in a drilling mud system, after a shale shaker and desander have removed larger particles.

Purpose: The cones separate fine particles ranging from approximately 15 to 45 microns by using centrifugal force.

Material: They are manufactured from highly durable materials, such as cast urethane, which are resistant to heat, abrasion, and chemicals found in drilling fluids.

Unit configuration: Desilter units typically contain multiple 4-inch cones. For example, usually 12-20 cones.

Replacement and equivalent parts

Because Brandt is a major original equipment manufacturer (OEM), replacement parts are available from various suppliers.

Aftermarket equivalents: Other manufacturers produce cones that are functionally equivalent to the Brandt 4-inch desilter cones.

Part identification: When purchasing replacements, it is helpful to provide the size. Such as 4 inch, 12 inch etc.

email: [email protected]

[solidscontrol-blog1]

Mi-Swaco MD2/3 Shale Shaker Screens. Replacement shaker screen for MD2 and MD3 shale shakers. Size: 610x660mm, material: composite material.

Contact: [email protected]

Website: https://www.axsolidcontrol.com

               http://www.jxsolidscontrol.com

[solidscontrol-blog1]

Filtration Unit in Drilling Waste Management

Using the filter press can treat well of drilling waste water and cuttings.

Contact : Alisa, Email: [email protected]

[solidscontrol-blog1]

Solids Control System's Composition Equipment (II)

Solids control system is used to store, configure, circulate and purify drilling fluid. To make sure the drilling fluid’s good performance, different drilling rigs has different solids control equipment. According to SY/T6223-2005 “Use and Maintenance of Drilling Fluid Cleaning Device”, the 4000-7000 meters’ drilling rig solids control equipment is as below:

http://solidscontrolstock.blogspot.com/2018/09/solids-control-systems-composition_18.html

[solidscontrol-blog1]

Why drilling fluid is very important in drilling system? Please attention http://solidscontrolstock.blogspot.com/2018/09/why-drilling-mud-is-very-important.html

[solidscontrol-blog1]

mud hoppers for chemical adding in drilling fluid solids control system.

[solidscontrol-blog1]

Hebei JinXin Machinery Co.,Ltd, supply to you all separation equipment!

Shale shaker, Desander, Hydrocyclones, Centrifuges, Mud tank, Vertical cutting dryers!