Professional For Drilling Mud Solids Control Equipment

[solidscontrol-blog1]

Brandt King Venom replacement shale shaker screens. Same as King Cobra.

https://www.axsolidcontrol.com

[solidscontrol-blog1]

Brandt 4-inch cones are cones used in mud cleaners and desilters for drilling fluid solids control.They are designed to separate fine solids, sands, and silt from drilling mud in the oil and gas industry.

Key features

Application: A 4-inch desilter cone is typically used as a third stage of solids control in a drilling mud system, after a shale shaker and desander have removed larger particles.

Purpose: The cones separate fine particles ranging from approximately 15 to 45 microns by using centrifugal force.

Material: They are manufactured from highly durable materials, such as cast urethane, which are resistant to heat, abrasion, and chemicals found in drilling fluids.

Unit configuration: Desilter units typically contain multiple 4-inch cones. For example, usually 12-20 cones.

Replacement and equivalent parts

Because Brandt is a major original equipment manufacturer (OEM), replacement parts are available from various suppliers.

Aftermarket equivalents: Other manufacturers produce cones that are functionally equivalent to the Brandt 4-inch desilter cones.

Part identification: When purchasing replacements, it is helpful to provide the size. Such as 4 inch, 12 inch etc.

email: [email protected]

[solidscontrol-blog1]

TBM launch seal. tunnel entrance/exit seal, Boring seal

wensite: https://www.axsolidcontrol.com

Email: [email protected]

[solidscontrol-blog1]

Rubber seal for TBM

[solidscontrol-blog1]

Mi-Swaco MD2/3 Shale Shaker Screens. Replacement shaker screen for MD2 and MD3 shale shakers. Size: 610x660mm, material: composite material.

Contact: [email protected]

Website: https://www.axsolidcontrol.com

               http://www.jxsolidscontrol.com

[solidscontrol-blog1]

Automatic Chemical Adding Unit, for water treatment, waste water treatment

Contact: [email protected]

Website: https://www.axsolidcontrol.com

               http://www.jxsolidscontrol.com

[solidscontrol-blog1]

Polyurethane Screens

About the material polyurethane:Polyurethane is a new type of polymer composite material and belongs to high-tech products,its nature between plastic and rubber but its performance is much better than the two, is an ideal material to replace them. 

Fine Polyurethane Screen Panels 1. Superior capacity and performance with high open area of 35 to 45 percent 2. Reduced operating and maintenance costs from long life and ease of installation 3. Available with openings as fine as 300 mesh 4. Practically non-blinding 5. Can be repaired or patched in place 6. Custom mold designs

[solidscontrol-blog1]

Mud Gas Separator for Oil and Gas Drilling

Mud gas separator is the first process for drilling fluid took out from drilling well.

http://www.jxsolidscontrol.com/products/20-Mud-Gas-Separator.html

[solidscontrol-blog1]

Shaftless Screw Conveyor in Drilling Fluid Conveyor

Shaftless screw conveyor shell is made of carbon steel, lining board is made of nylon or wear-resistant ultra-high molecular polyethylene, leaf is made of wear-resistant manganese steel, which not only matches the service life of the factory, but also reduces the cost.  

The biggest characteristic of shaftless screw conveyor is good environmental protection.The spiral surface, which is completely enclosed and easy to clean, can ensure the environment sanitation and the material delivered from pollution and leakage.Large torque and low energy consumption. Shaftless screw conveyor is mainly used for conveying sludge, drilling fluid, etc., and the conveying direction of the conveyor is determined by the spiral direction of the screw blade, which can be transported in both directions.The conveyor can be airtight transportation, prevent environmental pollution. Shaftless screw conveyor is mainly composed of shaftless screw, u-shaped spiral groove, cover plate, liner plate, inlet, outlet, discharge outlet and drive device. Materials are input by inlet and output by outlet after being pushed by shaftless screw. Shaftless screw conveyor also known as anti - winding conveyor, garbage disposal conveyor. Shaftless screw conveyor driving device for kitchen waste: it adopts cycloidal needle wheel reducer or shaft mounted gear reducer with hard tooth surface. When designed, the driving device should be located at the outlet end as far as possible, so that the screw is under tension when running. WLS shaft-less spiral conveyor housing: the housing is u-shaped, with upper cover (when needed), made of stainless steel or carbon steel or glass fiber reinforced plastics.There are two kinds of inlet and outlet of shaftless screw conveyor for food and kitchen waste: square and round.  The specific choice of shaftless spiral conveyor material is determined according to the customer's meaning, but we will also suggest you to choose the material cost performance and so on, shaftless screw conveyor we have a first-class design and production team, at the same time, the regular model of shaftless spiral blades are ready for stock, the deadline is urgent customer first choice! The shell of shaftless screw conveyor is made of carbon steel, lining board is made of nylon or wear-resisting ultra-high molecular polyethylene, and leaf is made of wear-resisting manganese steel. The biggest characteristic of shaft - free screw conveyor is good environmental protection.The spiral surface, which is completely enclosed and easy to clean, can ensure the environment sanitation and the material delivered from pollution and leakage.Large torque and low energy consumption. Shaftless screw conveyor is mainly used for conveying sludge, gate slag, etc. The conveying direction of the conveyor is determined by the spiral direction of the screw blade, which can be transported in both directions.The conveyor can be airtight transportation, prevent environmental pollution.

[solidscontrol-blog1]

Filtration Unit in Drilling Waste Management

Using the filter press can treat well of drilling waste water and cuttings.

Contact : Alisa, Email: [email protected]

[solidscontrol-blog1]

Mechanical Seal Centrifugal Pump

Know more about centrifugal pump, please contact with: [email protected], 7 years experiences in solids control industry.

Blog address:

http://www.jxsolidscontrol.com/products/13-Hydrocyclone-Desilter.html

[solidscontrol-blog1]

The Vacuum Degasser in Oil and Gas Drilling Mud Solids Control

Vacuum degasser is a special equipment used to treat the drilling fluid. Its very important effect is restoring the drilling fluid's density, stabilizing the viscosity of drilling fluid, reducing the drilling well cost. When the drilling fluid do not contain the gas, the function of vacuum degasser is a bigger power mud agitator. The type of vacuum degasser is Vertical type.  Hebei JinXin Machinery Co.,Ltd's Vacuum Degasser Parameters

[solidscontrol-blog1]

Middle Speed Decanter Centrifuge

Horizontal Decanter Centrifuge's Working Principle 1). The Separation principle

The separation of liquid and solids is finished in the drum bowl. The high speed drum bowl take the inner drilling fluid rotate in a high speed.  Then the drilling fluid was thrown of to the drum wall and form a fluid ring.  The solid phase in the fluid ring are subjected to centrifugal forces hundreds or even thousands of times greater than their own gravity. The solids particles break the resistance of  fluid viscosity and to the inner wall form a solid layer, and the liquid form a fluid layer.  The ratio of the centrifugal force to the gravity of the solid particles in the fluid ring is called the separation factor of the Decanter Centrifuge. The bigger separation factors, the thinner of  separation particles.  In the oil drilling, the decanter centrifuge can be divided i three types.

a).  Lower speed centrifuge. This type decanter centrifuge is also called barite recycle centrifuge. Its separator factor is 500-700. For the lower density solids phase,  its separation size is 6-10 micron meters. For the higher density solids phase, its separation size is 4-7 micron meters. b). Middle speed centrifuge. This type decanter centrifuge is 800, it can separate 5-7 micron meters' solids. This type is the most using one, using in removing the harmful solids, control mud density and viscosity. c). High speed centrifuge. This type's centrifuge's separation factor is 1200-2100, the separation size is 2-5 micron meters, and also using in removing the harmful solids. control the mud density and viscosity. It is commonly used in series with low-speed centrifuge to form a two-engine system.  In this system, the lower speed decanter centrifuge is the first phase, the separation barite is sent back to the mud tank to recover the barite.  The liquid discharged by lower speed centrifuge is into a buffer tank. Then using a pump to suction this fluid to feeding in high speed decanter centrifuge. After the high speed decanter centrifuge, the solids is discharged to outside of tank, and the liquid into the recycling system. Using two equipment, both can remove the harmful solids, also escape the waste of barite. The high speed centrifuge also has VFD type. The frequency can be adjusted. If you have any interest in Decanter Centrifuge, welcome to contact us! Website: www.jxsolidscontrol.comEmail: [email protected]

[solidscontrol-blog1]

Solids Control Decanter Centrifuge

Hebei JinXin Machinery Co.,Ltd

Since the lats 1980s, Decanter centrifuge has been widely used in the national oil industry(especially in deep wells and horizontal wells ). It is the dispensable solids control equipment. Decanter centrifuge includes spiral subsidence type, sieve water type, hydraulic turbine type and so on. In the oil and gas drilling industry, the most commonly used is Horizontal spiral sedimentation type centrifuges. And this horizontal decanter centrifuge also has low speed, middle speed and high speed. Decanter Centrifuge's Structure: Main motor, Back drive motor,Hydraulic couplings, Drum bowl, Differential mechanism and Feeding pump etc.

Email: [email protected]

[solidscontrol-blog1]

Difference of Desander and Desilter

Desander and Desilter's difference The diameter of the hydrocyclone's upper parts is the important factor which decide the hydrocyclone's treating capacity and separation size. The diameter of the cylinder is called the nominal size of the cyclone. The lower cone part's angle is between 15-20 degrees. The diameter of underflow mouth is 10-30 mm. Generally, a group of hydrocyclones which nominal size is 150-300mm, is called Desander. And a group of hydrocyclones which nominal size is 50-125mm, is called Desilter. (1) Hydrocyclone desander

According to the treating capacity required, the desander has one to three hydrocyclones. Each hydrocyclone's treating capacity is no less than 20-120m3/h under the pressure of 0.2 Mpa. The normal working hydrocyclones can remove 95% of particles bigger than 74 micron meters and 50% of particles bigger than 40 micron meters. In order to improve the using efficiency, in choosing the hydrocyclones, the treating capacity must be 125% of whole drilling capacity. (2) Hydrocyclone desilter According to the treating capacity required, the desilter has more than 4 pieces of hydrocyclones. Each hydrocyclone's treating capacity is no less than 5-15m3/h under the pressure of 0.2 Mpa. The normal workinghydrocyclones can remove 95% of particles bigger than 40 micron meters and 50% of particles bigger than 15 micron meters. The desilter can remove 12-13 micron meters' barites. So the desilter can not be used in treating heavier drilling fluid. In choosing the desilter, the treating capacity must be 125%-150% of whole drilling fluid capacity. Website: www.jxsolidscontrol.com Email: [email protected]

[solidscontrol-blog1]

Desander and Hydrocyclone’s

Desander and Hydrocyclone’s structure and working principles, following link.

https://solidscontrolstock.blogspot.com/2018/10/desander-and-desilters-working-principle.html

[solidscontrol-blog1]

Mongoose Shaker Screens and Shale Shakers

Mongoose shaker’s working principle, please click below link:

https://solidscontrolstock.blogspot.com/2018/10/working-principle-of-shale-shaker-ii.html

[email protected]