#tagoutdevice

[industrialsafetyinsights]

OSHA Lockout Tagout Standard 1910.147(b): Tagout and Tagout Device

A Tagout Device is a prominent Warning Device, such as a Tag and a tie i.e. any means of attachment, that clearly states that the machinery being controlled must not be operated until the tag is removed in accordance with an established procedure.

These devices should be sturdy & substantial enough to withstand harsh conditions at the workplace. The procedure of placing a Tagout device on an Energy Isolating Device in accordance to the established procedure is called Tagout.

Check OSHA Guidelines in details - https://www.safetylock.net/learn-lockout-tagout/osha-documentation/

[oshalockouttagoutguide]

OSHA Lockout Tagout Standard: Application of Control 1910.147(d)(4)

The next element of the sequence is:

Lockout Tagout application: The isolating device must be locked and tagged out by the authorized employee using individual Locks and Tags. These Locks & Tags must be affixed to each energy isolating device to hold it in a safe or off position and physically prevent its operation. Tagout devices must be affixed in a manner that it indicates the movement of the isolating device from the safe or off position is prohibited. Moreover, when the Tagout device is used along with the Lockout device, capable of being locked out, the tag so attached must be fastened at the same point at which the lock would have been attached. Although the Tag is supposed to be attached to the equipment along with the isolating device, in cases where the tag cannot be directly attached to the energy isolating device, it shall be located as close as safely possible to the device. Making sure that it is easily visible to the employee working on the machine, or around the machine, to avoid any inadvertent energization. Check OSHA Guidelines - https://www.safetylock.net/learn-lockout-tagout/osha-documentation/

[oshalockouttagoutguide]

OSHA Lockout Tagout Standard: Application of Control 1910.147(d)

The established procedures for the application of energy control (the lockout or tagout procedures) covers the following elements and actions as mentioned above. Preparation of Shutdown: Before an authorized employee turns off the machine, he must have knowledge regarding the types, magnitude, hazards, and the means to control the energy. The first step is intended to notify all the affected employees regarding the Lockout and allow the employees to get ready for the shutdown, and plan ahead to perform safely.

In complex or group Lockout Tagout situations, all involved personnel should be made aware of their respective roles and assignments. Machine or Equipment shutdown: To place the machine in a state that it will let employees work on it safely, it must be turned off or shutdown using established procedures. An orderly shutdown must be used to avoid any increased or additional hazards to employees as result of shut down. Machine isolation: All the isolating devices such as isolators, valves, etc. that are needed to control the energy of the machines, must be physically located and operated so that the machine is isolated from its energy sources. Check OSHA Guidelines - https://www.safetylock.net/learn-lockout-tagout/osha-documentation/

[oshalockouttagoutguide]

OSHA Lockout Tagout Standard 1910.147(b): Tagout and Tagout Device

A Tagout Device is a prominent Warning Device, such as a Tag and a tie i.e. any means of attachment, that clearly states that the machinery being controlled must not be operated until the tag is removed in accordance with an established procedure.

Tagout Device indicates employee photo, maintenance details, reason of isolation, numbering, specific instructions or warnings useful to avoid accidental energization of equipment under repair. These devices should be sturdy & substantial enough to withstand harsh conditions at the workplace.

The Tagout devices also indicate that the Energy Isolating Device and the equipment being controlled may not be operated until the tagout device is removed.

The procedure of placing a Tagout device on an energy isolating device in accordance to the established procedure is called Tagout.

Check OSHA Guidelines - https://www.safetylock.net/learn-lockout-tagout/osha-29-cfr-1910-147-explained/