I cut my gutter cleaning attachment down to a 90 degree angle on my pressure washer. No matter how hard you try, it always seems like you will get a shower when washing something with a pressure washer due to splash back. The gutter attachment is from #northerntool and comes as almost a U shape. I cut out about 3 inches and welded the pipe back together. The threads on the pipe are 1/4 inch so it may be possible to get a rigid 90 and do the same without all of the welding and expense. I have been washing a ton of parts in the last couple of weeks and having this now has made cleaning so much easier. Now I can select when I am taking a shower. Cleaning under mower decks and the underside of a car or even under the hood is so much easier as a straight wand is almost always too long to get in the place you need. The coupler on the end of the wandering does rotate without the trigger pulled. Once you pull the trigger, the 90 stays in place without moving. Now if pressure washer manufacturers would start making this attachment, lots of people would be much happier having an easier life. Just my two cents. #designsbyandrew #metalworking #metalworkingnation #welding #welded #weldeverydamnday #weld #fabricator #fab101 #fabrication #pressurewasher #pressurewasherattachment #tricktools #northerntool #custommade #cleaning #easylife