Okay, I've officially made a buttload of bunting (over 70 ft) and some of you have asked how I did the appliques because yay not sewing those on.
quilting cotton fabric, any pattern you like. Nothing too heavyweight!
heat and bond iron-on interfacing (link is amazon; your local fabric retailers should have it. Buy local if you can!)
an iron and ironing board
a computer, with access to www.photopea.com or an image editor of your choosing.
a cricut or other cutting machine that works with sticky mats to feed material.
A roll of vinyl transfer tape--you can do this project without it, but it will be easier with.
To begin, make your design in your image editor. You want large, single color, relatively simple shapes on a transparent background. I have a 12x24 cutting mat, so I made my image 11.5x23.5. Export it as a PNG, and then upload it into design space or whatever application runs your cricut or cutting machine.
Prepare your fabric by cutting it to the size of your mat. For me, that's rectangles of 12x24 material. Also cut the same size out of heat-and-bond. DO NOT REMOVE THE BACKING PAPER FROM THE HEAT AND BOND. Once you've got rectangles of fabric and rectangles of heat and bond, attach the heat and bond to the fabric with an iron.
Prepare your sticky mat by attaching a layer of vinyl transfer tape face-down, so the sticky side is up when you remove the backing paper. This will prevent the fabric from leaving lint all over the mat, and the backing paper for heat and bond is very prone to tearing--without the transfer paper, you'll be cleaning your mats a lot between every cutting.
Stick the heat and bonded fabric face-up on the mat, so the paper backing of the heat and bond is adhered to the transfer tape. Smooth out to remove bubbles. And then load the mat into your cricut! I've got an explore air 2 (several years old now) and I used my normal blade at its deepest cut settings, and fire away. (Designs do not need to be mirrored.) Before removing your finished cut from the sheet, double check that the blade has gone all the way through and you will not need a second pass-I never did, but check just in case!
Peel everything off the mat, discarding the paper backing/transfer paper layers, then iron your fabric designs onto your bunting! If you want things to be really durable, you can sew the edges down like a normal applique, but for bunting, I didn't feel it was necessary.
tangentwithtanner
andulkaphoto
vaporwave
janainaart
jacobvanloon
